Jump to content

Sign in to follow this  
byork

[18 Oct 2019] NGX Reboot 3.4 FOR P3D V4 Released -UGCX Support!

Recommended Posts

Attention FS2Crew NGX 'REBOOT' Drivers:

 

The Version 3.4 update has been released with new special support for Ultimate Ground Crew X!

This is a FREE update!

 

The V3.4 update is for the P3D V4 version only!

 

VERSION 3.4 IS BUILT INTO THE MAIN INSTALLER ONLY.

YOU WILL NEED TO LOGIN TO YOUR FS2CREW ACCOUNT AND RE-DOWNLOAD THE MAIN INSTALLER AGAIN.

LOGIN TO YOUR FS2CREW ACCOUNT AND CLICK "COMPLETED ORDERS".

 

YOU DO NOT NEED TO UNINSTALL NGX REBOOT FIRST.

IF YOU REQUIRE ASSISTANCE, SEND US A SUPPORT TICKET VIA: WWW.FS2CREW.COM

IF YOU PURCHASED VIA A 3RD PARTY VENDOR, YOU WILL NEED TO REDOWNLOAD NGX REBOOT FROM THEM.

GIVE THEM A FEW DAYS TO GET THE UPDATED FILE ON THEIR SERVER.

 

 

CHANGE LOG:

VERSION 3.4 (P3D V4 VERSION ONLY!)

18 OCTOBER 2019

Ultimate Ground Crew X Integration:

1. When UGCX Voice Control is active, FS2Crew NGX Reboot ramp agents should no longer respond to any detected voice commands that are intended for the UGCX ramp agents.

This saves you the hassle of pressing "Hard Mute" on the FS2Crew Main Panel when you wish to communicate with the UGCX ramp agents to avoid triggering the ramps agents in both programs at the same time.


2. When using Hand Signals only (Engine Start Up without Pushback scenario), UGCX can now remove the PMDG chocks and GPU from the PMDG 737 when you trigger the associated hand signal.

This is done via FS2Crew internally.  The Chocks and GPU are removed via the PMDG FMC menu, so the aircraft must have some power.

Ensure the "UGCX Option" on the FS2Crew NGX Reboot Config Panel is set to YES.

 

Other Misc changes:

1. You can no longer select WAI in the Departure Brief since WAI serves no purpose on the ground.
2. "Set Engine Bleed 2 On" and "Set Dome Light Off" voice commands fixed.

 

 

 

VERSION 3.3 (P3D V4 VERSION ONLY!)

26 JANUARY 2019

1. Bug fixes

 

VERSION 3.2 (P3D V4 VERSION ONLY!)

8 DECEMBER 2018

 

1. "Cancel checklist" command removed as it could trigger audio loss.

2. New Config Option:  FO enters Vref during the arrival setup (SOP1 Only).

3. SOP 3: EFIS "Airport" Button during Station Setup fixed.

4. Suppress Flap movement check config option saved option working now.

5. Ground Crew voice in the USA region (fueller had an Aussi accent previously).

6. Bug fixes.

 

 

VERSION 3.1

13 JANUARY 2017

 

1. 'ATC Client Xponder' Config Option state will now save properly.  Previously it would reset if you press the CFG button.
 
2. Per user request, you can now toggle the SECONDARY PANEL via a hotkey or joystick button.  Assign a button to: NITROUS TANK VALVE TOGGLE.
 
3. Slight pause fixed after calling for the Secure Checklist.
 
4. Eliminated that possibility the "Master Caution - Hydraulics" could play in SOP3 during Engine Start with Emergencies enabled.
 
5. If SOFT or HARD MUTE active, Green Bar will no longer appear on the screen when speech is detected <-  THIS ONE IS SIGNIFICANT.  
 
6. Flap Movement Check option fixed.
 
7. Global Voice Set (UK Voice Set 2) "Landing Checklist" sound fixed.
 
8. If using the spoiler to trigger the After Landing Flow, the new minimum ground speed to trigger the flow is 50 knots up from 20.
 
9. New CFG option to disable the FO's timer during Engine Start.  A user reported he experienced the occasional CTD during Engine Start.  We linked it to the 737's FO's timer.  If it's ever an issue for your, just disable this option.
 

 

VERSION 3.0

17 SEPT 2016

NEW!

1. Support for the new NGX Reboot Global FO Voice Pack.

 
 
2. KLM airlines Config option: Taxi Lights will be turned off during the runway entry flow.
 
3. Key Board/ Joystick button command to pause the Crew audio per user request.  To toggle the audio pause function, assign a keyboard/joystick button to WING FOLD command.
 
When active, note the new flashing symbology on the Main Panel:  AUDIO!
 
4. GOL airlines cfg option: When announcing "LAND", THE FO will turn on the Retractable landing lights.
 
5. Minor symbology on the SECONDARY panel updated per user request.
 
6. New voice callouts to which the FO will reply "checked":
 
  • GREEN LIGHT ON THE AERO BRIDGE
  • MARSHALLER IN SIGHT
  • MY AIRPLANE
  • MY THROTTLES
  • AUTOPILOT COMING OUT
 
 
CHANGED:
 
1. FO now starts 3 minute timer as the first step in his after landing flow per user request.
 
 
FIXED:
 
1. SOP 3:  Should no longer get a 'MASTER CAUTION HYDRAULICS' when starting engines.
 
2. FO should no longer announce "Cabin Crew Seats for Landing" when calling for flaps five during a touch and go.
Note: The circuits are meant to be flown at flaps 5, so you really should't be calling for flaps five anyway.
 
3. "LETS TAXI BACK TO THE RUNWAY" command should now no longer result in a stuck mode after an RTO.
 
4. During 2nd sector, FO should now turn on the wheel well light as appropriate.
 
5. SOP 2 AFTER LANDING FLOW XPONDER user option now auto saves when you exit FS per user request.
 
6. Per user request, trigger for FO to start his after landing flow changed from 30 knots to 50 knots if stowing the spoiler is defined as the trigger.
 
7. If military option selected, FO will no longer inform you the cabin is not secure during takeoff.
 
8. Set Packs On/ Off and Auto voice commands removed per user request.
 
9. You should now be able to call for a Go Around during Rollout.
 
10. UK audio fixed for FULL UP and FULL DOWN.
 
11. Volume of ACARS printer reduced.
 

 

VERSION 2.0

15 APRIL 2016

 

 

 

New!

 
1. Emergency NGX! Functionality (a FREE 24.95 EUR value!)
 
The full set of Emergency NGX! procedures were ported over to Reboot.
 
We promised when we released Reboot NGX that we would give all Reboot users Emergency NGX! for free, and we delivered on our promise   :smile: 
 
The new failures / non-normals functionality works with the AU voice set and it's designed for use with SOP 2, but you can also use it with SOP 1 and 2.
 
The failures only work with Voice Control, not Button Control.
 
  • Aborted Engine Starts
  • APU Fault
  • APU Fire
  • Bleed Trip Off
  • Cabin Altitude Warning or Rapid Depressurization
  • Cargo Fire
  • Drive 
  • EEC Alternate Mode
  • Emergency Descent 
  • Engine Failure or Shutdown
  • Engine Fire or Severe Damage
  • Engine In Flight Start 
  • Evacuation
  • Hydraulic Pump Overheat
  • Loss of Hyd System A
  • Loss of Hyd System B
  • Off Schedule Descent
  • One Engine Inoperative Landing
  • Partial or All Gear Up Landing
  • Probe Heat 
  • Reverser 
  • Standby Power Off
  • Tailstrike
  • TR Unit
  • Transfer Bus Off
  • Window Overheat
 
 
2. Geographic detection system update to better detect appropriate voice accent region for ground crew.
 
3. New CFG Options:
 
  • SOP 2: Option to have the FO set the transponder during his After Landing flow instead of during the Shutdown flow (which is the actual way that do it at that airline   :Tounge: )
  • Option to suppress the Flap Movement check during cold weather operations.
 
4. Voice Control: If the speedbrake is deliberately not armed during the Landing Checklist (for example, when flying circuits): speak "Down Detent" for the Speedbrake challenge.
 
5. Button Control: Gear down command skipped if gear already down.
 
6. If the Jetway CFG option is selected, the Jetway will now connect during gate arrival in SOP 3, even though this airline never uses gates in the real-world.  The trigger is the "Cabin Crew Disarm Doors and Crosscheck" voice command.
 
7. On-Line ATC automatic transponder control option in the CFG menus renamed to: "On Line ATC XPNDR - YES/ NO" to prevent confusion.  Remember that Prepar 3D Version 3 users should always set this option to NO due to a technical issue with P3D V3 if flying on-line using a pilot client.
 
8. During his Secure flow, the FO will now turn off some cockpit lights on his side.
 
9. De-playing sound will shut-off when the forward cabin door is (manually) closed if not doing a thru-flight, or when you call for the Secure Checklist.
 
10. New "Systems Check" button in the Config Manager.  This function designed to help you quickly identify and troubleshoot any potential installation issues.
 
 
 
FIXED:
 
1. Button Control:  Descent Mode not terminating.  It will now shut off during the After Landing flow.
 
2. SOP 2 Button Control: "Cabin Crew Prepare for Landing at 20,000" PA should now play.
 
3. No flap retraction during the FO's After Landing flow under certain temperature conditions.
 
4. "Let's Taxi Back to the Runway" command during a Reject Takeoff should work properly now.
 
5. Button Control: Flaps 40 speed check added.
 
6. Button Control: If skipping direct to the Descent or Approach mode, the Before Start Checklist will no longer play.
 
7. FA's "Happy to release the Cabin?" should now play on the 2nd leg.
 
 
MANUAL UPDATED:
 
1. Set Course On My Side/ Set Course on Your Side added.
 
 

VERSION 1.1

OCTOBER 17 2015

NEW FEATURES/ COMMANDS / OPTIONS

  • P3D V3 Support.
  • Independent “GEAR DOWN” command (separate from other verbiage).
  • New CONFIG Option per user request: Option to have the FO not ask to release the Cabin Crew.
  • New CONFIG Option per user request: Option to allow MCP commands (Heading, Speed and Alt) to function while on the ground.
  • New CONFIG Option: “ON LINE ATC CLIENT”.  By default it is set to off.  When set to off, FS2Crew will not send a transponder signal to Squawkbox.
  • New PA per user request: “TURBULENCE”.
  • SOP 3 new possible response to the Flaps challenge in the Before Taxi Checklist: "CHECK UP FORTY UP".  Used when freezing conditions are present and you wish to taxi to the runway with the flaps up after doing a flaps movement check.

 

FIXED
  • Updated Configuration Manager.  A few users could never get it to open due to Dot Net problems on their end.   This issue should now be fixed.
  • UK Voice Set: "Before Takeoff Checklist" spoken instead of "Before Taxi Checklist".
  • Button Control: Missing FA Cabin PA when starting Engine 1.
  • Button Control: Pressurization Mode Selector position referred to as "Auto", not "On'.
  • SOP 3: Runway lights will now turn off during the 10 Checks in the Climb.
  • Takeoff Sequence PA's fixed.
  • EU Voice set: When the FA asks if you're ready to board, the same female FA will now respond.
  • Flap 5 Match Speed command.
  • SOP 3: VSD was going on even if associated VSD CFG option set to Off.
  • SOP 3: The FO will hold the After Takeoff checklist at altimeters during the After Takeoff checklist if the MCP Altitude window value is less than or equal to the Transition Altitude.   The FO will not hold at the altimeter challenge if the MCP altitude window is greater than the Transition Altitude.
  • SOP 3 No Engine Bleeds After Takeoff Section fixed and manual updated.
  • Missed Approach Altitude of 10,000 feet will now be verbalized during the Approach Brief.
  • When playing the Departure Brief, the crew status value no longer automatically changes.
  • Removed possibility FO could attempt to turn on the VSD twice in SOP3 during either the “Ten Checks” or the Approach Checklist.
  • SOP 3: If the Before Start checklist was run very late, the FO shall no longer prompt you for the flight deck windows and doors challenge after you ask the FA to close the cockpit door.
 
UPDATED
  • Pre Flight Checklist available even if the FO does not run the main Pre Flight procedure.
  • FO's After Landing Procedure (trigger: spoiler down) now uses GPS ground speed (less than or equal to 20 knots) instead of indicated airspeed as a necessary condition.
  • For the benefit of on-line ATC users, FO will set the transponder to Standby instead of Alt Off even if ASDEX selected to yes during the Before Taxi procedure.
  • Button Control: Full Up/Down added to the Flight Controls check.
  • SOP 1: FO will now only turn on the Beacon during his Before Start flow.
  • FO will now turn on the wheel well light during the walk around.
  • If you do not run the Pre Flight events, the FO should now set the landing altitude in the pressurization controller during his Descent Flow.
  • SOP 3 Before Taxi Checklists: Stab trim challenge now accepts an actual value., i.e., 5.4 units.
  • SOP 3: Randomized FO’s response for releasing the cabin crew to ‘okay’ or ‘check’.
 
 
 

ugcx_ngx_screen.jpg

Share this post


Link to post
Share on other sites

Great News, thanks Bryan, look forward to using it.


David Murden.  MSFS 2020  172 G1000 : Bonanza G36 CCL P3D v5  FSL A321 / A320 / A319 : PMDG NGu / 748iF  DCS: A10C  : AV-8B  :  F-14B  : F-16C F/A-18C

My FSL Walkthrough PDF From GPU to Parked.      My PMDG NGXu Light Mod      AVSIM FILES

PC 4790k@4.6 : 1070 : 16GB DDR3 : Thrustmaster Warthog HOTAS: Thrustmaster TPR. ( Ordered 10900K@4.9 All Cores HT ON : AIO Corsair H150i Pro XT 360mm : 32GB DDR4 3200MHz 14-14-14-31: RTX 3080 : Corsair HX850i Platinum Plus : 2x 1TB Samsung EVO Plus M.2 )

Share this post


Link to post
Share on other sites

Great work as always Bryan, thanks a lot!


Richard Åsberg
Beta tester for FS2Crew and HiFi Simulation Technologies

Share this post


Link to post
Share on other sites

Thanks for update!

But since documentation is not updated for new options, please explain in details:

1) New CONFIG Option per user request: Option to have the FO not ask to release the Cabin Crew - Where?

2) ASDEX option and “ON LINE ATC CLIENT” how do they work together? 

Share this post


Link to post
Share on other sites

1. It's in the Config Options.  Just root through the FS2Crew menu's.  You'll find it.

 

2. The "on-line atc client" is only used for people who experience CTDs when using VPilot.  A couple users experienced CTDs with VPilot in the 777 version in the P3D V3 version only.  Don't ask my why.  I don't get them.  Regardless we added this extra option for those people who have that issue.  When this option is in the 'off' state, FS2Crew will not attempt to control the position of the VPilot transponder setting via Simconnect, thus removing any chance of a crash.

 

There's no other connection to ASDEX with respect to that option.

 

Best,

Share this post


Link to post
Share on other sites

Working excellent so far here.....   :smile:


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797

FS2C #72243 #71201 #69299 #43560 #52175 #68068 #68152 SM#1325481

PMDG #431793 #371950 #333135 #332876 #292207 #280217 #247845 #206809  #178218 #171813 

Share this post


Link to post
Share on other sites

Still have a problem with 1.1 , P3Dv3 and vpilot. I cant to load a flight, every time P3D had hanging, i suppose there is a conflict between programs. I had try to load P3D with NGX Reboot 1.1 fist ( ATC ONLINE - YES)  and then start vpilot- hanging! vice versa  - the same. Then I try to without NGX Reboot - Ok.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    27%
    $6,960.00 of $25,000.00 Donate Now
×
×
  • Create New...