I have no fix name on my MFD.

[Capndams 0]

Hi there,

 

I'm used to having sometimes this bug when doing reinstall, mostly with P3D.

The way I found out to fix that MFD names bug is to:

1) install the Phenom300 aircraft only,
2) open the sim and fly it for a 10 sec flight

3) Then close the sim

4) and eventually install the extension pack.

 

It's always working for me. Hope it my help some of you.

 

Rgds.

[Damen9090 0]

I was working on this for the longest time, I ended up going to the fonts folder and installing everything in there because the function was working just no text. I started the sim up and its working 100% now.

[joechyau 0]

On 2017/1/18 at 12:48 AM, Capndams said:

Hi there,

 

I'm used to having sometimes this bug when doing reinstall, mostly with P3D.

The way I found out to fix that MFD names bug is to:

1) install the Phenom300 aircraft only,
2) open the sim and fly it for a 10 sec flight

3) Then close the sim

4) and eventually install the extension pack.

 

It's always working for me. Hope it my help some of you.

 

Rgds.

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

[joechyau 0]

On 2015/11/1 at 9:55 PM, chunsajihuni said:

http://me2.do/53kglLyS

 

 

In my MFD there has no fix name(NBD, VOR, Airport etc).

I have a trouble at make input a flight plan.

For example I don't know where SID & STAR fixes are located in.

Just enter inferred input and fixed them again and again.

 

I have a EXTENSION PACK v1.2 (v1.1 is same result.  Default navi data has no problem.)

To install again but result is same.

 

What did I miss I do?

What shoud i do?

 

Sorry for my bad english.

Thank you.

 

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

[joechyau 0]

On 2016/6/25 at 11:41 PM, AdrianoN said:

I Just bought it yesterday and I have the same issue. I am using prepar 3.2. can you guys help me

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

[joechyau 0]

On 2016/11/18 at 11:33 PM, flymesome said:

Same problem here too. Has anyone come up with a solution? I'm getting frustrated.

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

[joechyau 0]

On 2016/11/29 at 11:50 PM, kenny584 said:

Hey Guys.

 

Here is something to try, although I'm not saying it will work for everyone, as people seem to be having conflicting results with this aircraft !! I noticed from the screenshots that the 'Range' on the display is set at 50M. Try reducing the Range down to 15M . At this display range in my aircraft the Fix names etc show up. They are also visible in the FSMaNia videos, so they are available, perhaps just not at certain ranges. Try also the Declutter option. Perhaps the names are Decluttered out, if you know what I mean.

 

I hope this helps and does not add to your confusion.

Regards...Kenny

 

Hey Guys.

 

 

Here is something to try, although I'm not saying it will work for everyone, as people seem to be having conflicting results with this aircraft !! I noticed from the screenshots that the 'Range' on the display is set at 50NM. Try reducing the Range down to 15 NM (Nautical Miles). At this display range in my aircraft the Fix names etc show up. They are also visible in the FSMaNia videos, so they are available, perhaps just not at certain ranges. Try also the Declutter option. Perhaps the names are Decluttered out, if you know what I mean.

 

I hope this helps and does not add to your confusion.

Regards...Kenny

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

[joechyau 0]

On 2017/1/6 at 12:46 AM, gallo9 said:

I have the same problem too. When I install version v1.3 you can see the names of VORs, NDBs, etc. The error occurs when installing the navigraph expansion pack. That's when the names disappear. Even with the AIRAC 1613 installed, Prd3D v3.3.5. It is desperate, to buy a product and to malfunction. Uninstalled and installed several times without solving the problem, and running as administrator. And from what I see, nothing is being done to solve it.

 

Regards.

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

[joechyau 0]

On 2017/1/6 at 4:58 PM, simbol said:

I eventually gave up and uninstalled the expansion pack (which also fixed constant FSX-SE crashes during load), Carenado gave me another plane in exchange after several complains about the issues I had with Navigraph expansion pack and the phenom 300 plane.

 

Regards,

Simbol

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

[simbol 5,819]

4 hours ago, joechyau said:

Open the Fonts folder inside the simulator's main root folder, select all the fonts, right click and select install. This will reinstall all simulator fonts, and this should solve the issue.

Thanks for your message but this was very long time ago, I moved to P3D and I use the F1 GTN complete with most of my carenado airplanes.

Regards 

Simbol