Lear 35 DME Problem

[Bob Scott 7,715]

Observed this problem in the Lear 35 V1.9 in both FSX and P3D v3:  The DME indicator is updating very sporadically, and does not show changes in 0.1 nm increments.  I'll see something like 12.9...then it'll update to 13.9 without ever displaying the intervening 0.1 nm values (e.g. 13.0, 13.1, 13.2  etc).

 

Regards

 

[ramprat 8]

Observed this problem in the Lear 35 V1.9 in both FSX and P3D v3:  The DME indicator is updating very sporadically, and does not show changes in 0.1 nm increments.  I'll see something like 12.9...then it'll update to 13.9 without ever displaying the intervening 0.1 nm values (e.g. 13.0, 13.1, 13.2  etc).

 

Regards

Hi Bob,

 

I emailed Mark about this a couple days ago.  He got back to me and said he was not aware of the problem but he would look into it. 

[Bob Scott 7,715]

Looking at the DME gauges closer, the coding is clearly broken...the tenths digit is unusable, which makes VOR/LOC/ILS-DME approaches a no go, not to mention any kind of arc procedure. 

 

Happily it was easy enough to fix.

 

Regards

[ramprat 8]

Any word from Flysimware on this issue?

[Raphael_Chacon 42]

+1

[Flysimware 647]

I found the issue. There was a piece of code in the DME 1 (copilot side) that did not get removed. The pilot side was correct. And this caused the copilot DME tenths to jump around. I will get this fix in our new updated tonight since i have not updates stores yet.

 

If you compare the 2 codes DME 1 had 100* 100% in the tenths code and DME just had 100*. This was suppose to be removed and not sure how i missed this.