March 12, 201610 yr Hi. Every time I try to load the 737-200 into P3Dv3.1 (either as a new scenario or changing aircraft in an existing scenario) it crashes the sim to the desktop. I did get the 737 to load one time, but it was not functioning correctly. I then loaded the SimConnect files from P3D. I did get one 737 to load once after installing the SimConnect files, but after that it crashes every time. I'm on Windows 7. All other aircraft (default and 3rd-party) seem to be OK. Please advise what is causing this and what I can do. Thanks, Jeff Jeff Smith System: i9-[email protected]., ASUS Maximus XI Hero MB, 32 GB 3200 Hyper-X RAM, Corsair HX1000i PSU, Cooler Master ML360R RGB, EVGA RTX 3080Ti FTW3, (2) Samsung 860 500GB SSD for Windows 10 Pro and sim, (2) M.2 NVMe 2TB, (2) WD Black 4TB HD for data, Samsung 65" 4K curved monitor @ 30Hz. (Currently running VSync, TB , Unlimited),YOKO+ yoke, VF TQ6+,TPR pedals, Logitech Multi, Switch, and Radio Panels Software: P3Dv4.5HF3 Pro, Ultimate Traffic Live, ASP3D, ASCA, ORBX, Fly Tampa, GSX/GSX2, PMDG, A2A, Just Flight, Milviz, Carenado, Majestic. On other computer: P3D v3.2.3, My Traffic 6.0a, PMDG, ORBX, A2A, Captain Sim , iFly, Flight 1, Flysimware, Just Flight, Milviz, Carenado
March 12, 201610 yr Commercial Member Get on the support forums. Read the signature below or, page one of the manual Please contact oisin at milviz dot com for forum registration information. Please provide proof of purchase if you want support. Also, include the username you wish to have.
March 12, 201610 yr Author Thanks. I'm already on the Milviz Support Forums. Just trying to get help whereever it shows up. Jeff Jeff Smith System: i9-[email protected]., ASUS Maximus XI Hero MB, 32 GB 3200 Hyper-X RAM, Corsair HX1000i PSU, Cooler Master ML360R RGB, EVGA RTX 3080Ti FTW3, (2) Samsung 860 500GB SSD for Windows 10 Pro and sim, (2) M.2 NVMe 2TB, (2) WD Black 4TB HD for data, Samsung 65" 4K curved monitor @ 30Hz. (Currently running VSync, TB , Unlimited),YOKO+ yoke, VF TQ6+,TPR pedals, Logitech Multi, Switch, and Radio Panels Software: P3Dv4.5HF3 Pro, Ultimate Traffic Live, ASP3D, ASCA, ORBX, Fly Tampa, GSX/GSX2, PMDG, A2A, Just Flight, Milviz, Carenado, Majestic. On other computer: P3D v3.2.3, My Traffic 6.0a, PMDG, ORBX, A2A, Captain Sim , iFly, Flight 1, Flysimware, Just Flight, Milviz, Carenado
March 12, 201610 yr Hi. Every time I try to load the 737-200 into P3Dv3.1 (either as a new scenario or changing aircraft in an existing scenario) it crashes the sim to the desktop. I did get the 737 to load one time, but it was not functioning correctly. I then loaded the SimConnect files from P3D. I did get one 737 to load once after installing the SimConnect files, but after that it crashes every time. I'm on Windows 7. All other aircraft (default and 3rd-party) seem to be OK. Please advise what is causing this and what I can do. Same with me Jeff, the initial install and run went well for me, but subsequently running the 737 causes P3D to immediately shut down - Will register for support - always nice to know it's not just me, makes a solution more likely! Eugene
March 12, 201610 yr Author The answer is in a thread in the Milviz Support Forum for the 737-200. It's near the top by Captainatr and is about 732 or 737 crashes. On page 3, I think, of that thread. It's a download from Milviz and goes in the MilvizData folder. It's a .dll file I believe. At work now and can't remember name. Something like "Uns.dll". If you leave out the FMS choices in the setup it also takes care of the problem, but the extra file allows you to use the FMS. I'll be available at about 3pm central time. Jeff Smith System: i9-[email protected]., ASUS Maximus XI Hero MB, 32 GB 3200 Hyper-X RAM, Corsair HX1000i PSU, Cooler Master ML360R RGB, EVGA RTX 3080Ti FTW3, (2) Samsung 860 500GB SSD for Windows 10 Pro and sim, (2) M.2 NVMe 2TB, (2) WD Black 4TB HD for data, Samsung 65" 4K curved monitor @ 30Hz. (Currently running VSync, TB , Unlimited),YOKO+ yoke, VF TQ6+,TPR pedals, Logitech Multi, Switch, and Radio Panels Software: P3Dv4.5HF3 Pro, Ultimate Traffic Live, ASP3D, ASCA, ORBX, Fly Tampa, GSX/GSX2, PMDG, A2A, Just Flight, Milviz, Carenado, Majestic. On other computer: P3D v3.2.3, My Traffic 6.0a, PMDG, ORBX, A2A, Captain Sim , iFly, Flight 1, Flysimware, Just Flight, Milviz, Carenado
March 12, 201610 yr If you leave out the FMS choices in the setup it also takes care of the problem Thanks for that - a useful workaround, Kat's in the process of registering me for support, so I'll be able to download the dll later on. Eugene
March 12, 201610 yr Author Eugene, the file is called" Uns.Data.dll". The name of the thread is "P3DV3 crashes when selecting Milviz 732" started by Captainatr. Right now it is the 7th thread down in the "Topics" section of the 737-200 Support Forum. It's the 5th post on the 3rd page and is by JonathanBleeker. There is a Dropbox link in his post which will take you to the file. Worked for me and several others on there. Jeff Jeff Smith System: i9-[email protected]., ASUS Maximus XI Hero MB, 32 GB 3200 Hyper-X RAM, Corsair HX1000i PSU, Cooler Master ML360R RGB, EVGA RTX 3080Ti FTW3, (2) Samsung 860 500GB SSD for Windows 10 Pro and sim, (2) M.2 NVMe 2TB, (2) WD Black 4TB HD for data, Samsung 65" 4K curved monitor @ 30Hz. (Currently running VSync, TB , Unlimited),YOKO+ yoke, VF TQ6+,TPR pedals, Logitech Multi, Switch, and Radio Panels Software: P3Dv4.5HF3 Pro, Ultimate Traffic Live, ASP3D, ASCA, ORBX, Fly Tampa, GSX/GSX2, PMDG, A2A, Just Flight, Milviz, Carenado, Majestic. On other computer: P3D v3.2.3, My Traffic 6.0a, PMDG, ORBX, A2A, Captain Sim , iFly, Flight 1, Flysimware, Just Flight, Milviz, Carenado
April 25, 20179 yr MILVIZ 737 SHOWS UP IN LIST OF AIRCRAFT BUT WHEN YOU CLICK ON PLANE YOU GET A SHELETON OF A PLANE BITS AND PIECES THEN CRASHES AND SHUTS DOWN FXS
April 25, 20179 yr Commercial Member We're going to have to remove support for the UNS FMS in P3D as we cannot make it work. Sorry. Please contact oisin at milviz dot com for forum registration information. Please provide proof of purchase if you want support. Also, include the username you wish to have.
Archived
This topic is now archived and is closed to further replies.