P3D v2.5 fatal error after fresh installation

[737_800 434]

Hello,

 

since I purchased the A2A Cessna 172 for P3D last year, I would start flying with it. So I decided to install P3D 2.5. However, I cannot use it. I immediately get a fatal error. Event Viewer doesn't specify the error. Do you have any idea, why it doesn't work? How can I find out what's going wrong?

[737_800 434]

Hi,

 

nobody an idea? That's a really weird problem, that it doesn't run "at all". I literally only get this error message:

I don't whether this helps from the event viewer:

Faulting application name: Prepar3D.exe, version: 2.5.12946.0, time stamp: 0x555f2e54
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0000015e
Faulting process id: 0x15c0
Faulting application start time: 0x01d22711bddd5e7d
Faulting application path: C:\Program Files (x86)\Lockheed Martin\Prepar3D v2\Prepar3D.exe
Faulting module path: unknown
Report Id: 31d27d30-9305-11e6-8564-c86000c21d92

[Poppet 709]

Hello 

 

What are your full Computer specs ? 

 

This is a Fresh New Install yes ? 

 

Do you have 17 Default Prepar3D Yellow folders in your Install Location ?   If Not, Run the Prepar3D Installer again and Click Repair

 

======

 

Have you set up Prepar3D to  run as administrator ?   

 

Also (Important) Go to your Main Prepar3D Install folder,  Right Click on  Prepar3D.exe and run as administrator  Anything ? 

 

=====

 

Graphics Drivers up to Date ? 

 

=====

 

Have you added your Prepar3D folder to your Exclusions Zone of your Anti virus Software ?

 

==== 

 

Delete your Prepar3D.cfg and let it rebuild again to see if this helps. 

 

Location:   Local Disk (C:) ► Users ► you ► AppData ► Roaming ► Lockheed Martin ► PreparD v3  Prepar3D.cfg

 

======

 

If that doesn't work,  Locate and Delete these 4 Blue folders,  Prepar3D will rebuild them again  (Maybe something got mixed up) 

 

 ► Libraries ► Documents ► Prepar3D v2 files

 

 ► Computer ► Local Disk (C:) ►ProgramData ► Lockheed Martin

 

 ► Computer ► Local Disk (C:) ► Users ► you ► AppData ► Roaming ►Lockheed Martin

 

 ► Computer ► Local Disk (C:) ► Users ► you ► AppData ► Local ► Lockheed Martin

 

========

 

If that doesn't work,  Have a read here and Post a Crash Report to see if this gives any clues 

 

 http://www.avsim.com/topic/492255-my-computer-has-crashed-what-do-i-do-now/

[737_800 434]

I am going crazy. It doesn't work. Tried everything written above, but just getting CTD without being able to do anything in P3D.

 

Getting several times this warning:

 

Log Name:      System
Source:        cdrom
Date:          27.11.2016 16:39:57
Event ID:      51
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      ME
Description:
An error was detected on device \Device\CdRom0 during a paging operation.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="cdrom" />
    <EventID Qualifiers="32772">51</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2016-11-27T15:39:57.305152600Z" />
    <EventRecordID>281465</EventRecordID>
    <Channel>System</Channel>
    <Computer>ME</Computer>
    <Security />
  </System>
  <EventData>
    <Data>\Device\CdRom0</Data>
    <Binary>030080000100000000000000330004802D010000090300C00000000000000000006837070000000092F9000000000000FFFFFFFF01000000580000C40204000000200A12480200400080000004010000000000000000000010E2A40880FAFFFF0000000000000000E07E870880FAFFFFB0D53C0780FAFFFF000000000000000028000000E6ED00001000000000000000700005000000000A2800000A6F0300000000000000000000</Binary>
  </EventData>
</Event>

 

 

and this error:

 

Log Name:      Application
Source:        Application Error
Date:          27.11.2016 16:39:57
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ME
Description:
Faulting application name: Prepar3D.exe, version: 2.5.12946.0, time stamp: 0x555f2e54
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0000015e
Faulting process id: 0x1870
Faulting application start time: 0x01d248c445565e06
Faulting application path: D:\Lockheed Martin\Prepar3D v2\Prepar3D.exe
Faulting module path: unknown
Report Id: bf699618-b4b7-11e6-b1b2-c86000c21d92
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2016-11-27T15:39:57.000000000Z" />
    <EventRecordID>72036</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ME</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Prepar3D.exe</Data>
    <Data>2.5.12946.0</Data>
    <Data>555f2e54</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>0000015e</Data>
    <Data>1870</Data>
    <Data>01d248c445565e06</Data>
    <Data>D:\Lockheed Martin\Prepar3D v2\Prepar3D.exe</Data>
    <Data>unknown</Data>
    <Data>bf699618-b4b7-11e6-b1b2-c86000c21d92</Data>
  </EventData>
</Event>

 

 

AppCrashView doesn't show any warnings or errors.

 

Any help, don't know what I could try more?!

 

Specs: i5 3570K@4,3 Ghz

8GB RAM

Nividea 650 Ti @newest drivers

[vonmar 123]

You had a CDrom error??

 

"An error was detected on device \Device\CdRom0 during a paging operation."

[737_800 434]

Yeah, apparently. But I guess P3D hasn't worked before that CDrom warning, either.

 

Edit: CDRom warning vanished. Nonetheless, P3D is still not working. :(

[737_800 434]

This is so great: I have P3D and the A2A Cessna 172, but cant fly it. So great!

[vonmar 123]

This is so great: I have P3D and the A2A Cessna 172, but cant fly it. So great!

 

Can you fly the default P3D aircraft without the error?

[737_800 434]

No, I can't! P3D loads and immediately crashes.

[Bobsk8 12,730]

Maybe your install file for P3D is corrupt. 

[vonmar 123]

No, I can't! P3D loads and immediately crashes.

Have you installed any other aircraft (other than A2A) purchased, freeware, AI or FSUIPC?

[737_800 434]

Nope, I didn't. Just updated FSUIPC (registrated), but still get the crash.

[vonmar 123]

What is the Name of the Module that caused the crash now (windows event viewer)?

[737_800 434]

I think it's the same:

 

 

Log Name:      Application
Source:        Application Error
Date:          29.11.2016 23:32:20
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Me
Description:
Faulting application name: Prepar3D.exe, version: 2.5.12946.0, time stamp: 0x555f2e54
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0000015e
Faulting process id: 0x212c
Faulting application start time: 0x01d24a9061f45e1f
Faulting application path: D:\Lockheed Martin\Prepar3D v2\Prepar3D.exe
Faulting module path: unknown
Report Id: b0627657-b683-11e6-b369-c86000c21d92
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2016-11-29T22:32:20.000000000Z" />
    <EventRecordID>72280</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Me</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Prepar3D.exe</Data>
    <Data>2.5.12946.0</Data>
    <Data>555f2e54</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>0000015e</Data>
    <Data>212c</Data>
    <Data>01d24a9061f45e1f</Data>
    <Data>D:\Lockheed Martin\Prepar3D v2\Prepar3D.exe</Data>
    <Data>unknown</Data>
    <Data>b0627657-b683-11e6-b369-c86000c21d92</Data>
  </EventData>
</Event>

[vonmar 123]

Well,

 

Seeing it is just a default install install ... I would uninstall A2A then  

Uninstall P3D.

Download a fresh copy of P3D and verify the download ZIP checksum.

Delete P3D folders remaining per install instructions

Reinstall P3D and test.