fsx-ms Wheel not turning

[DragoB 25]

Hello! My wheel on the ground is not working since I cannot turn at all. Weard thing is that my rudder is workin.

Aircraft effected are those that were bought, namely Lear 36a and freeware C47 (the awesome one ofc!). No issues with default aircraft.

This issue affects FSX as well.
 

[charliearon 3,024]

Are you referring to MJ's C-47 Skytrain V.3Beta?  I have turning tailwheels on both V.2 and V.3Beta.  Have you made any adjustments to the [contact points] in the aircraft.cfg?

 

[DragoB 25]

nOPE not att all! it just isnt working!

 

Its kinda annoying cause its both p3d and fsx;se and they are seperate sims!

 

affects lear 35a and c47

[charliearon 3,024]

Here is my [contact points] from my C-47 V.3Beta

 

[contact_points]
//0  Class                        <0=none,1=wheel, 2=scrape, 3=float>
//1  Longitudinal Position        (feet)
//2  Lateral Position             (feet)
//3  Vertical Position            (feet)
//4  Impact Damage Threshold      (Feet Per Minute)
//5  Brake Map                    (0=None, 1=Left, 2=Right)
//6  Wheel Radius                 (feet)
//7  Steer Angle                  (degrees)
//8  Static Compression           (feet)  (0 if rigid)
//9  Max/Static Compression Ratio
//10 Damping Ratio                (0=Undamped, 1=Critically damped)
//11 Extension Time               (seconds)
//12 Retraction Time              (seconds)
//13 Sound Type
//14 Airspeed limit for retraction     (KIAS)
//15 Airspeed that gear gets damage at (KIAS)

//point.0=1,  -55.75,   0.0, -2.875, 1600.0, 0, 0.93, 180.0, 0.44, 2.00, 0.6,    0,     0,   0,     0,     0
point.0=1,  -55.75,   0.0, -2.875, 1600.0, 0, 0.93,  72.0, 0.44, 2.00, 0.6,    0,     0,   0,     0,     0
point.1=1,  -18.50, -9.12, -9.95, 1600.0, 1, 1.89,   0.0, 0.52, 1.33, 0.50,  8.0,  11.0, 2.0, 166.0, 166.0
point.2=1,  -18.50,  9.12, -9.95, 1600.0, 2, 1.89,   0.0, 0.52, 1.33, 0.50,  7.5,  16.0, 3.0, 166.0, 166.0

point.3=2,   -4.00,   0.0,  -2.2,  1800.0, 0, 0.00,   0.0, 0.000, 0.0, 0.000,  0.0,  0.0, 4.0, 0.0, 0.0
point.4=2,  -27.75, -46.8,   1.1,  1800.0, 0, 0.00,   0.0, 0.000, 0.0, 0.000,  0.0,  0.0, 5.0, 0.0, 0.0
point.5=2,  -27.75,  46.8,   1.1,  1800.0, 0, 0.00,   0.0, 0.000, 0.0, 0.000,  0.0,  0.0, 6.0, 0.0, 0.0
point.6=2,  -41.00,   0.0,  -2.2,  1800.0, 0, 0.00,   0.0, 0.000, 0.0, 0.000,  0.0,  0.0, 4.0, 0.0, 0.0
point.7=2,  -62.75,   0.0,  13.0,  1800.0, 0, 0.00,   0.0, 0.000, 0.0, 0.000,  0.0,  0.0, 9.0, 0.0, 0.0
point.8=2,  -61.00, -13.0,   3.0,  1800.0, 0, 0.00,   0.0, 0.000, 0.0, 0.000,  0.0,  0.0, 4.0, 0.0, 0.0
point.9=2,  -61.00,  13.0,   3.0,  1800.0, 0, 0.00,   0.0, 0.000, 0.0, 0.000,  0.0,  0.0, 4.0, 0.0, 0.0

static_pitch = 11.1
static_cg_height = 9.3
gear_system_type=1      //Hydraulic
tailwheel_lock = 1
 

Give this a try in yours.  Sorry, since your other ones that don't work are payware, you may have to check on their forums

or contact their "Help" person.

[DragoB 25]

Bloody hell the majestic is affected as well. Need to figure out whats wrong.

I dont know how, but the issue for C-47 has been fixed.  For the Lear 35a I had to press Steer Lock on the centre console and it worked. (havent read the manual...)

the majestic is probably the same - there is an unknown button that I need to press !

 

CHeers!