Jump to content
Sign in to follow this  
arnava1304

flytampa amsterdam glitch

Recommended Posts

Something to do with meshes// afcads. Aircraft sinks through the taxiways and runways. Googled around a bit, no other amsterdams installed, scenery library is as flytampa says to be. Something annoying happens everytime I buy a new flytampa scenery, can someone help.qjFzkCd.jpg

Share this post


Link to post

Sounds like you already asked about this over in FT's support forum and you also say your scenery library is in order in regards to FT but still I would like to ask if you have an entry for Amsterdam landclass in your scenery library?

 

Reason I ask is a friend of mine had a similar issue and in his case it was caused by the landclass entry wasn't in his scenery library. This is what it looks like in my case checking my scenery.cfg file.

 

[Area.176]
Title=FlyTampa-Amsterdam_LC
Local=F:\Program Files (x86)\Lockheed Martin\Prepar3D v3\FlyTampa\Amsterdam_LC
Active=TRUE
Required=FALSE
Layer=176

Richard Åsberg

Share this post


Link to post

Beside what Richard says , check also if you have an Alt EHAM bgl in you scenery/world/scenery folder...


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

 

Sounds like you already asked about this over in FT's support forum and you also say your scenery library is in order in regards to FT but still I would like to ask if you have an entry for Amsterdam landclass in your scenery library?

 

Reason I ask is a friend of mine had a similar issue and in his case it was caused by the landclass entry wasn't in his scenery library. This is what it looks like in my case checking my scenery.cfg file.

 

[Area.176]
Title=FlyTampa-Amsterdam_LC
Local=F:\Program Files (x86)\Lockheed Martin\Prepar3D v3\FlyTampa\Amsterdam_LC
Active=TRUE
Required=FALSE
Layer=176

 

yup, I have it.

 

Beside what Richard says , check also if you have an Alt EHAM bgl in you scenery/world/scenery folder...

Do you mean dummy eham bgl?

Share this post


Link to post

yup, I have it.

 

 

Do you mean dummy eham bgl?

Yes, that one.

I advice you to reinstall the scenery .


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

Yes, that one.

I advice you to reinstall the scenery .

Tried that, no results.

Share this post


Link to post

If you have UTX Europe installed then you have to "check status of repositioned airport" in the options tab and if EHAM is listed there, disable it.......


AMD Ryzen 7800x3d, Asus ROG Strix RTX4090, Asus x670e-e, G-Skill F5-6000J3038F16GX2-TZ5NR

Share this post


Link to post

If you have UTX Europe installed then you have to "check status of repositioned airport" in the options tab and if EHAM is listed there, disable it.......

 

No UTX

No UTX

 

Ftx global + OLC + Vector (AEC EHAM disabled)

Share this post


Link to post

I had this exact issue. Be sure that you have to Amsterdam LC active and below the Amsterdam folder. Also above any Orbx etc. Also check that everything is configured properly within Orbx Vector. I personally do not use the product but have heard it can cause issues like this. 

Share this post


Link to post

I had this exact issue. Be sure that you have to Amsterdam LC active and below the Amsterdam folder. Also above any Orbx etc. Also check that everything is configured properly within Orbx Vector. I personally do not use the product but have heard it can cause issues like this. 

 

Tried all of that

Share this post


Link to post

Fly Tampa's support forum would be the best place to get help I'm sure.


Richard Åsberg

Share this post


Link to post

Somehow... the problem fixed itself. Well to anyone else who gets this... good luck and welcome to the glamorous world of ESP!!!!!!!!!!

Share this post


Link to post

Somehow... the problem fixed itself. Well to anyone else who gets this... good luck and welcome to the glamorous world of ESP!!!!!!!!!!

sure you didnt do anything getting this problem

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...