Jump to content
Sign in to follow this  
ray123

Best external frame limiter?

Recommended Posts

Goodmorning everybody!

 

I switched to P3D for good now. It runs fairly smooth now. I lowered some settings and with the standard planes I get 40-60 fps.

But now the stutters are coming back :(

I'm using unlimited fps with vsync and triple buffering now.

 

I've read that an external frame limiter can help, but those posts are from 2012/2013...

What do you guys recommend? Radeonpro or something else?

 

Maybe some tips for some extra smoothness?

30fps is all I need...

 

Thanks!

Share this post


Link to post

Tried them all .

Imho DXTory's limiter is the best.


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

Thanks man! I tried it just now for about 15 minutes and it works great! Just what I needed  :dance:

Share this post


Link to post

Tried them all .

Imho DXTory's limiter is the best.

 

Too bad it doesn't work with ReShade


Asus TUF X670E-PLUS | 7800X3D | G.Skill 32GB DDR @ CL30 6000MHz | RTX 4090 Founders Edition (Undervolted) | WD SNX 850X 2TB + 4TB + 4TB

Share this post


Link to post

I´ve also tested a lot of external frame rate limiters, but ended up using the Nvidia one, at 30,5FPS lock, and the stutters are gone. I also use the 1/2 refresh rate VSYNC option - it´s a bit smoother than FastSync, but with a bit more input lag. I´ve set my internal limiter at 31fps. VSYNC needs to be set ON in P3D for it to work. 

You could also adjust the TextureMaxLoad parameter in the .cfg to further limit the stutters/long frames. More info on how to tune it here: Tuning Guide

Share this post


Link to post

Tried them all .

Imho DXTory's limiter is the best.

 

Better than 30mHz refresh sync Gerard?   Hard to beat zero stutters & total fluidity which is what I'm seeing when the total load is not sufficient to drive frame rate below 30.  Could be a different limiter might help by setting the rate down to 24 or so in the hopes of not getting into the sub-30 zone.


Noel

System:  9900K@5.0gHz@1.23v all cores, MSI MPG Z390M GAMING EDGE AC, Noctua NH-D15S w/ steady supply of 40-60F ambient air intake, Corsair Vengeance 32Gb LPX 3200mHz DDR4, Sabrent NVMe 2Tb x 2, RTX 4090 FE, Corsair RM 850W PSU, Win10 Pro, LG Ultra Curved Gsync Ultimate 3440x1440, TCA Boeing Edition Yoke & TQ, Cessna Trim Wheel, RTSS Framerate Limiter w/ Edge Sync for near zero Frametime Variance achieving ultra-fluid animation at lower frame rates.

Aircraft used in A Pilot's Life V2:  PMDG 738, Aerosoft CRJ700, FBW A320NX, WT 787X

 

Share this post


Link to post

As I have a triple view setup I have :

- DXTory at 24 fps

- P3D at Uimited

- VSync On

- Triple Buff On

- Monitors at 24 Hrtz


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

Please correct me if I'm wrong but with the fake full screen P3D is using I thought any external frame limiter was useless???

 

the nvidia 1/2 refresh tweak that works so good in FSX has almost/no effect in P3D...

 

***LM Please bring back a true full screen in V4


Flight Simulator's - Prepar3d V5.3/MSFS2020 | Operating System - WIN 10 | Main Board - GIGABYTE Z390 AORUS PRO | CPU - INTEL 9700k (5.0Ghz) | RAM - VIPER 32Gig DDR4 4000Mhz | Video Card - EVGA RTX3090 FTW3 ULTRA Monitor - DELL 38" ULTRAWIDE | Case - CORSAIR 750D FULL TOWER | CPU Cooling - CORSAIR H150i Elite Push/Pull | Power Supply - EVGA 1000 G+ 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...