Jump to content

Sign in to follow this  
partlett

VAS sudden unexpected behaviour

Recommended Posts

Up front I'm fully aware of what contributes to VAS usage in P3D v3. and for all the planes I fly regularly with all the addons, VAS has never been an issue.

 

However today something strange has manifested, I launched P3D and loaded a plane at airport, I've done nothing in the sim, my VAT usage started at 2.38 where I would have expected it to be but it continued to climb until out of memory about 20 mins later and I have done nothing in the sim but watch.

 

Has anyone any idea whats going on?

 

The only thing that has changed from one day to the next in the sim, was an auto upgrade from ORBX FTX Global Vectors and auto upgrade Chase Plane.

 

Any suggestions would be gratefully received.

Share this post


Link to post

Hello Partlett

 

Welcome to the Avsim forums

 

This same thing happened to me the other day whilst sat on the runway in the excellent FSLabs Airbus A320 ....

 

It turned out to be the NVidia driver I was using that was leaking memory badly

 

NVidia have just released a new driver therefore I recommend updating to this new one

 

Good luck

 

Cheers

 

Paul

Share this post


Link to post

Hello Partlett

 

Welcome to the Avsim forums

 

This same thing happened to me the other day whilst sat on the runway in the excellent FSLabs Airbus A320 ....

 

It turned out to be the NVidia driver I was using that was leaking memory badly

 

NVidia have just released a new driver therefore I recommend updating to this new one

 

Good luck

 

Cheers

 

Paul

 

 

Thanks Paul

 

I hope its this simple I'll let you know how I get on.

 

 

Cheers Mick

Share this post


Link to post

Paul

 

Problem still persists after Nvidia upgrade.

 

Really cannot fathom where or why all of a sudden this memory leak has started.

 

I've only got back into simming after giving up on it 7 years ago, it's all coming back just how frustrating it is continually dealing with technical and compatibility issues.

 

Thanks for your help

 

Mick

 

 

 

Thanks Paul

 

I hope its this simple I'll let you know how I get on.

 

 

Cheers Mick

Share this post


Link to post

So far, the consensus seems to be that all of the 378.xx drivers, including the latest (378.66, as of this writing), are causing significant memory leaks in P3D.  Going back to 376.33 or perhaps even earlier seems to be the trick right now.

 

See discussion in this related thread: http://www.avsim.com/topic/503393-747-v3-steady-vas-increase-due-to-nvidia-drivers-not-747/

 

Regards


Bob Scott | AVSIM Forums Administrator | AVSIM Board of Directors

ATP Gulfstream II-III-IV-V

System: i9-10900K @ 5.2GHz on custom water loop, ASUS Maximus XII Hero, 32GB GSkill 3600MHz CAS15, eVGA 2080Ti XC Ultra, Samsung 55" JS8500 4K TV@30Hz, 5xSamsung SSD, eVGA 1KW PSU, 1Gbps internet

SB XFi Titanium, optical link to Yamaha RX-V467, Polk/Klipsch 6" bookshelf spkrs, Polk 12" subwoofer, 12.9" iPad Pro, PFC yoke/throttle quad/pedals with custom Hall sensors, Coolermaster HAF932 case, Stream Deck XL button box

Share this post


Link to post

Hi Mick

 

I echo what Bob has just said

 

I am at present testing the latest driver and,for me, it seems to be behaving itself but without a doubt the 376.33 is solid as a rock ...

 

The only pain is ... if you are on Windows 10 it's a devil stopping the operating system from upgrading to a newer driver!!!!

 

Paul

Share this post


Link to post

if you are on Windows 10 it's a devil stopping the operating system from upgrading to a newer driver!!!!

 

You might try this...np here after making the described setting:  http://winsupersite.com/windows-10/stop-automatic-driver-updates-windows-10

 

Edit: not sure if the change above was, on its own, responsible for stopping the automatic driver updates.  I have also edited the registry, adding two keys (this is for WIn10 Home, unsure if it applies or works in Pro/Enterprise):

 

HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate

HKLM\SOFTWARE\WOW6432Node\Policies\Microsoft\Windows\WindowsUpdate

 

and in both keys I added a DWORD (32-bit) value: ExcludeWUDriversInQualityUpdate and set its value to 1

 

The second key in WOW6432Node is unnecessary for those few running 32-bit Win10

 

Regards


Bob Scott | AVSIM Forums Administrator | AVSIM Board of Directors

ATP Gulfstream II-III-IV-V

System: i9-10900K @ 5.2GHz on custom water loop, ASUS Maximus XII Hero, 32GB GSkill 3600MHz CAS15, eVGA 2080Ti XC Ultra, Samsung 55" JS8500 4K TV@30Hz, 5xSamsung SSD, eVGA 1KW PSU, 1Gbps internet

SB XFi Titanium, optical link to Yamaha RX-V467, Polk/Klipsch 6" bookshelf spkrs, Polk 12" subwoofer, 12.9" iPad Pro, PFC yoke/throttle quad/pedals with custom Hall sensors, Coolermaster HAF932 case, Stream Deck XL button box

Share this post


Link to post

Thank you all for your advice, the older nvidia driver has not stopped the memory leak.

 

Chaseplane notified me today that their current build is not compatible with the latest version of P3D (which I'm using) so I'm going to run some VAS tests minus Chaseplane.

 

Fingers crossed this is the culprit.

 

Thanks

 

Mick

Share this post


Link to post

Sneaky, Microsoft updated my nVidia driver the other day and I suddenly had huge VAS usage.  I didn't realize the GPU driver was updated.  I found a good web article on how to prevent windows 10 from automatically updating using the "Local Group Policy Editor."  Look about half way down the page:

 

https://www.howtogeek.com/224471/how-to-prevent-windows-10-from-automatically-downloading-updates/

 

Robert


\Robert Hamlich/

 

Share this post


Link to post

Thank you all for your advice, the older nvidia driver has not stopped the memory leak.

 

Chaseplane notified me today that their current build is not compatible with the latest version of P3D (which I'm using) so I'm going to run some VAS tests minus Chaseplane.

 

Fingers crossed this is the culprit.

 

Thanks

 

Mick

No VAS leak here with Chase Plane. Using 376.33 drivers.


System: MSFS2020-Premium Deluxe, P3D 5.0, ASUS Maximus XI Hero,  Intel i7-8086K o/c to 5.0GHz, Corsair AIO H115i Pro, Corsair Spec Omega Case,Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, 32Gb Corsair Vengeance DDR4 3200Mhz RAM, EVGA 850+ Gold PSU,Win 10 Pro 64-bit, LG 43UD79 43" 4K IPS Panel., Logitech X56 Hotas Stick and Throttle, Logitech/Saitek Flight Yoke System, Multi, Radio, Switch Panels

 

Share this post


Link to post

No VAS leak here with Chase Plane. Using 376.33 drivers.

Hello Julian

 

Your right Chase Plane turns out not to be the source of my VAS leak tested this morning I'm befuddled and bemused and running out of ideas.

I'll just have to bite the bullet and do an incremental re-install, enthusiasm is starting to wain.

 

Cheers

 

Mick 

Share this post


Link to post

Drivers or not i am pretty sure i have a VAS leak with HT on or because i switch between full screen and window mode a couple of times.

 

This HT ON /OFF was never issued was it?

 

David gave me a great smooth spot with AM116 for the FSLA320. Works much better than AM14 and HT OFF but i have VAS increased. Got an OOM into EKCH but with my normal settings.

 

3.4.9.18400/373.06 SLI

 

Thanks Michael Moe


Michael Moe

 

fs2crew_747_banner1.png

Banner_FS2Crew_Emergency.png

Share this post


Link to post

Something has not been right for the last few days after my GPU driver was unknowingly updated.  I switched back to nVidia driver 376.33 but I am still consuming large amounts of VAS.

 

My sim was running incredibly smoothly before the driver update and I am wondering if I am adding to the problem by setting nVIdia inspector Frame Rate Limiter to ~30.5 fps and running unlimited in the sim.  The frames do run at ~30 fps when the limiter is set but there may be issues with that.

 

Rob


\Robert Hamlich/

 

Share this post


Link to post

Sneaky, Microsoft updated my nVidia driver the other day and I suddenly had huge VAS usage.  I didn't realize the GPU driver was updated.  I found a good web article on how to prevent windows 10 from automatically updating using the "Local Group Policy Editor."  Look about half way down the page:

 

https://www.howtogeek.com/224471/how-to-prevent-windows-10-from-automatically-downloading-updates/

 

Robert

 

That group policy edit only applies to Pro/Enterprise editions of Win 10, and the article says it stopped working after the Anniversary Edition update.  BTW, your sig says you're running Win 10 "Ultimate"...they ain't no such thang!  Pro, maybe?

 

Regards


Bob Scott | AVSIM Forums Administrator | AVSIM Board of Directors

ATP Gulfstream II-III-IV-V

System: i9-10900K @ 5.2GHz on custom water loop, ASUS Maximus XII Hero, 32GB GSkill 3600MHz CAS15, eVGA 2080Ti XC Ultra, Samsung 55" JS8500 4K TV@30Hz, 5xSamsung SSD, eVGA 1KW PSU, 1Gbps internet

SB XFi Titanium, optical link to Yamaha RX-V467, Polk/Klipsch 6" bookshelf spkrs, Polk 12" subwoofer, 12.9" iPad Pro, PFC yoke/throttle quad/pedals with custom Hall sensors, Coolermaster HAF932 case, Stream Deck XL button box

Share this post


Link to post

I'm wondering if I'm seeing this as well.  I just had a flight OOM in the NGX over the middle of the caribbean, near Grand Turk.  I lowered settings to halfway on most sliders and VAS didn't adjust one tiny bit.  I'm somewhat baffled by this, as there's really nothing out there aside from a few small islands, and I've *never* seen zero impact from lowering sliders.  FSUIPC reported about 150000 free, I lowered sliders all to halfway or less (at least the scenery sliders including density and range, as well as shadows and such)

 

-stefan


spitsig9.jpg

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    31%
    $7,810.00 of $25,000.00 Donate Now
×
×
  • Create New...