Jump to content
Sign in to follow this  
panpan

Mcp Panel Locked

Recommended Posts

Hello

I have the MCP panel 1 and i use it With airbus x v 1.16.

I have linda 1.13 and all is ok. All is green and i've not error in the console.

I've reinstall p3d today and i dont know why, my combo is locked when i'm on my aircraft. 

Speed at 100 and alt 10000.

I've not the message "ready" on my panel.

All rotaries are locked. Nothing move on my panel when i try to move the rotaries.

This config has work before and i don't understand why i've an issue now :(

Anyone can help me for unlock my situation ?

Many thanks.

Panpan. 

Share this post


Link to post
Share on other sites

Hi panpan

Welcome to the LINDA community and for your patience.

First, I would advise that you update LINDA to 2.9.3 along with FSUIPC4 to the latest version. These will work with the original MCP1 panel but make sure you backup your current setup (as detailed in the Release Notes). Second, make sure your FSUIPC4 is fully licensed so that it will work with LINDA.

Thirdly, you are using the old Aerosoft Airbus X not the current release. Are you using the correct LINDA Airbus module? Module 4.4 is not compatible with the older add-on.

If none of these work, do come back and I will try to assist.


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

Hello ScotFlieger !

Thank you for your answer ;)

I've try your wiki about the LINDA 2.9.3 version but don't work for me.

I've a FSUIPC4 licence.

I think i've overwrite my old setup and i've not do a backup.

I've also a Aerosoft airbus X licence. I've the last one 1.31but i don't play with this because i can't undock the PFD, and ECAM windows with this version. But i can do it with the 1.16. (I play on home cockpit and i've more screens)

Do you know what's the module version for LINDA works with the older addon ?

Many thanks.

Share this post


Link to post
Share on other sites

Hi Panpan

You say that LINDA 2.9.3 does not work for you but you don't say why. 

Is your MCP1 panel working with other aircraft with LINDA 1.13?

The last Airbus X module was v2.4. 


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

Because my panel stay stuck at spd 100, alt 10 000 and nothing work !!!

Just baro can be switch but i can't change the value :(

When my panel works the spd is 100, hdg 000 and alt 100 and rotaries works.

Share this post


Link to post
Share on other sites

System time = 06/04/2017 19:06:14, Simulator time = 19:05:08 (00:05Z)
Aircraft="FSLabs A320X CFM"
Starting everything now ...
LUA.0: beginning "D:\Games\Nouveau dossier\Modules\ipcReady.lua"
LUA.0: ended "D:\Games\Nouveau dossier\Modules\ipcReady.lua"
LUA.1:
LUA.1: [INIT] Loading...
Advanced Weather Interface Enabled
LUA.1:  Aircraft: FSLabs A320X CFM
LUA.1:  Aircraft module detected: FSLabs A320
LUA.0:  AivlaSoft library loaded...
LUA.0:  FSX standard library loaded...
LUA.0:  IVAO library loaded...
LUA.0:  RealityXP library loaded...
LUA.0:  Weather library loaded...
LUA.0:  A2A MAP library loaded...
[E] LUA.0:  ---> ERROR:: MCP configs not found for current aircraft!

 

:-(

I've paste the module FSLABSA3XX_0_5.

 I had already used LINDA with this device. I understand nothing more.

Share this post


Link to post
Share on other sites

And just now with airbus X 1.16

Aircraft="Airbus A320 easyJet G-EZTB"
Starting everything now ...
LUA.0: beginning "D:\Games\Nouveau dossier\Modules\ipcReady.lua"
LUA.0: ended "D:\Games\Nouveau dossier\Modules\ipcReady.lua"
LUA.1:
LUA.1: [INIT] Loading...
Advanced Weather Interface Enabled
LUA.1:  Aircraft: Airbus A320 easyJet G-EZTB
LUA.1:  Aircraft module detected: Aerosoft Airbus X
LUA.0:  AivlaSoft library loaded...
LUA.0:  FSX standard library loaded...
LUA.0:  IVAO library loaded...
LUA.0:  RealityXP library loaded...
LUA.0:  Weather library loaded...
LUA.0:  A2A MAP library loaded...
LUA.0:  RADIOS : Empty command for :: COM1 Select
LUA.0:  Module: Aerosoft Airbus X Started...
LUA.0:  Ready to go, Captain!
LUA.0:
LUA.0:   Offsets watching list cleared!

No error but my mcp is always stuck.

Share this post


Link to post
Share on other sites

Hi Panpan

There is little I can do to assist you without you installing the latest LINDA 2.9.3. The old version you are using is unsupported and lacks the logging and debugging I need to diagnose your problem.

Before you do anything, please email the file /linda-cfg/aircrafts/aerosoft airbus x/config-mcp.lua to linda@awginfosys.net.


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

Hi panpan

Thank you for the sending the config-mcp.lua file. I have examined it along with the Airbus 2.4 module and its functions. It appears to be correctly configured.

Do you have any other versions of Aerosoft Airbus installed? There can be a clash when more than one in installed. 

I recommend that you install LINDA 2.9.3 and run the debug procedure you will find here. When you run the full debug reports I should be able to see what is failing.


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

I think my panel is out of service.

When i push more time a button while linda start my mcp have the message "ready" and all the values alt, spd, and hdg are correct but i can't change anything.

Mcp stay locked.

After i try to install vrisim.exe and my device is not detected. But if i flood a button while the soft try to detect my panel, the soft find my mcp but again after that all is locked.

What do you think about that ?

Share this post


Link to post
Share on other sites

Hi panpan

If your MCP1 is not being detected by Vrsim.exe, make sure LINDA is not running and use the Windows Device Manager to check whether the panel is present. 


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...