P3D V4 Support

[marcus55 0]

OK , I understand

and thank you for having answered me so quickly!

I am quickly going to try.

Thank you for your work and I would donate you that I could

[MarkW 1,491]

Is there a way to stop the console from opening and then having to manually close it?

[ScotFlieger 280]

5 minutes ago, MarkW said:

Is there a way to stop the console from opening and then having to manually close it?

That problem was fixed in beta build 673. The Console if closed before you close LINDA normally will not open automatically.

If you are opening and closing LINDA automatically, please ensure that the FSUIPC5.ini [Programs] entry has CLOSE not KILL for LINDA.exe.

Please check out beta build 678 on download page. 

[MarkW 1,491]

Ok thanks. 

[marcus55 0]

hello,

I tried the radio module saitek and there is nothing which displays in screens.
Buttons work all but The screens of the radio module Saitek show nothing.

You have an idea?

Thank you in advance

++

 

 

[ScotFlieger 280]

Just now, marcus55 said:

I tried the radio module saitek and there is nothing which displays in screens.
Buttons work all but The screens of the radio module Saitek show nothing.

You have an idea?

Are you using Win10?

[marcus55 0]

Win10 Pro

Fscuip 5.102

I tried not to use Linda for the management of radio Saitek and multi-Saitel panel and that works!!

I used Linda for the switch panel, TPM and Yoke.

There, I do not understand anymore, there is not a driver for Panel of installed, nothing....

 

[ScotFlieger 280]

There is a problem with Saitek Panels on Win10 due to the power they require. Win10 switches off or reduces current to USB port to save power usage giving you a blank LED display. I had the same problem and it took me some time (several months) to resolve it. You are supposed to be able to change the settings via Control Panel but I found the surest way was to use RegEdit. You should also connect your Saitek panels directly to your PC and not to a USB hub.

The Regedit procedure is as follows but you need to do it carefully. You do so at your own risk.

• Search for Regedit and open it.
• Navigate to Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\
• Locate the VID_06A3&PID_0D05 and 0D06 for Saitek Radio and Multi panels.
• Under each device you will find 1 or more instances (occurrences) of each device depending on how many USB ports you have plugged them into.
• Clicking on each of these instances you will see a line Device Parameter. Link on this.
• On righthand side you should see the line EnhancedPowerManagementEnabled. By default the data value is set to 0x00000001 (1).
• Double click on this line and enter 0 and click OK.
• Repeat for each instance of each panel.

After rebooting your PC the panel LEDs should be lit.

 

[marcus55 0]

hello,

I know, I have the only one of it to modify. I would make tries a little later and I would inform you about results

[marcus55 0]

Hello,

I had deactivated the management of the power supply by  Windows ,but........ I forgot  1 hub!! Grrrr!

I have make 2 tries, it seems to work. I would make tries longer with other planes.

 

[NicolasTAP 6]

Hello guys,

I reinstall all from scratch (Win 10 64bit, Prepar3D V4, PMDG 777, Orbx ...etc) but i have a strange problem with LINDA. 

I install FSUIPC 5.103e , LINDA 3.0.1 and profile for A2A C172 and PMDG 777 

I use : Hotas Warthog, MCP 2 Boeing and Thrustmaster MFD

Now, Linda detect C172 or PMDG 777 or default FSX profile but MCP2 is stuck with message "Select your Aircraft and Fly Now" 

Section joysticks is detect all buttons from Hotas and MFD, i asign function but i dont see any results...

Thnak you for any advice

[ScotFlieger 280]

1 minute ago, nicutapa said:

Hello guys,

I reinstall all from scratch (Win 10 64bit, Prepar3D V4, PMDG 777, Orbx ...etc) but i have a strange problem with LINDA. 

I install FSUIPC 5.103e , LINDA 3.0.1 and profile for A2A C172 and PMDG 777 

I use : Hotas Warthog, MCP 2 Boeing and Thrustmaster MFD

Now, Linda

And what is the problem with LINDA?   Please follow fault diagnosis procedure under LINDA Support.

[NicolasTAP 6]

19 hours ago, nicutapa said:

Hello guys,

I reinstall all from scratch (Win 10 64bit, Prepar3D V4, PMDG 777, Orbx ...etc) but i have a strange problem with LINDA. 

I install FSUIPC 5.103e , LINDA 3.0.1 and profile for A2A C172 and PMDG 777 

I use : Hotas Warthog, MCP 2 Boeing and Thrustmaster MFD

Now, Linda detect C172 or PMDG 777 or default FSX profile but MCP2 is stuck with message "Select your Aircraft and Fly Now" 

Section joysticks is detect all buttons from Hotas and MFD, i asign function but i dont see any results...

Thnak you for any advice

The big problem it was a small problem finally. LINDA requires the registered version of FSUIPC to communicate.

Andrew. Thank you very much for your support 

[mari8it 11]

 

On martedì 11 luglio 2017 at 1:50 PM, nicutapa said:

Hello guys,

I reinstall all from scratch (Win 10 64bit, Prepar3D V4, PMDG 777, Orbx ...etc) but i have a strange problem with LINDA. 

I install FSUIPC 5.103e , LINDA 3.0.1 and profile for A2A C172 and PMDG 777 

I use : Hotas Warthog, MCP 2 Boeing and Thrustmaster MFD

Now, Linda detect C172 or PMDG 777 or default FSX profile but MCP2 is stuck with message "Select your Aircraft and Fly Now" 

Section joysticks is detect all buttons from Hotas and MFD, i asign function but i dont see any results...

Thnak you for any advice

same problem for me ...how to solve?

[mari8it 11]

25 minutes ago, mari8it said:

 

same problem for me ...how to solve?

solved deleting the config-hid.lua files on the profiles