Jump to content
Sign in to follow this  
Yosserhughes

Should I even bother?

Recommended Posts

With the system I have should I even bother buying P3D V4? Any advice welcome.Thank you

    Windows 7 Home Premium 64-bit SP1
        CPU
            Intel Core i7 2600K @ 3.40GHz    40 °C
            Sandy Bridge 32nm Technology
        RAM
            8.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-25)
        Motherboard
            Alienware 046MHW (CPU 1)    52 °C
        Graphics
            ASUS VE278 (1920x1080@60Hz)
            1023MB NVIDIA GeForce GTX 460 (NVIDIA)   

Share this post


Link to post

Have you been running P3D v3 ? If so, what have your results been ?  If you haven't run Prepa3D yet, you may want to wait until you've upgraded the CPU and GPU.


 
Quote

850237

WAT1460.png

Share this post


Link to post

You'll definitely want a video card upgrade, and possibly a RAM upgrade (try it with your 8 GB first, but you would benefit from more and faster RAM), but sure.  And overclock that 2600K if you aren't... that's the whole purpose behind the 2600K.

I use a 2600K at 4.2 GHz, 16 GB of 1333 MHz CAS 8 DDR3, with a 6 GB GTX 1060 and v4 runs well with sliders a little to the right of center.

LM offers a no-questions-asked 60 day refund period, so you've really got nothing to lose but time by testing it out on your system.

Share this post


Link to post

What's your history with flight Sims 

What success have you had with previous platforms and with what add-ons? 

Or is this your first flight sim? 


ZORAN

 

Share this post


Link to post

I don't think you'll be able to do it. Too little RAM. Too slow CPU. very weak GPU. IMHO, at best you'd have a slide show without any add ons. You are right at or a little below the minimum recommended

I'd wait until you can upgrade your system.

 

Vic


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post
5 minutes ago, vcarlo said:

Have you been running P3D v3 ? If so, what have your results been ?  If you haven't run Prepa3D yet, you may want to wait until you've upgraded the CPU and GPU.

No just FSX and have it running quite well..Thanks for reply!

Share this post


Link to post
3 minutes ago, RoboRay said:

You'll definitely want a video card upgrade, and possibly a RAM upgrade (try it with your 8 GB first), but sure.  And overclock that 2600K if you aren't... that's the whole purpose behind the 2600K.

I use a 2600K at 4.2 GHz, 16 GB of 1333 MHz CAS 8 DDR3, with a 6 GB GTX 1060 and v4 runs well.

LM offers a no-questions-asked 60 day refund period, so you've really got nothing to lose but time by testing it out on your system.

Refund policy sounds good must give it a try so..Have never overclocked,will try that also..Thanks

Share this post


Link to post
5 minutes ago, Venturi said:

What's your history with flight Sims 

What success have you had with previous platforms and with what add-ons? 

Or is this your first flight sim? 

Have been running FSX( with lots of add ons) for years and  it runs very well indeed.Just like the look of P3d v4 !

Share this post


Link to post
7 minutes ago, vgbaron said:

I don't think you'll be able to do it. Too little RAM. Too slow CPU. very weak GPU. IMHO, at best you'd have a slide show without any add ons. You are right at or a little below the minimum recommended

I'd wait until you can upgrade your system.

 

Vic

I sort of thought so...Thanks

Share this post


Link to post

1G memory on the video card is the big killer. If you could just upgrade that to a 2G card you'd be at the minimum and could get by for now.

That and overclock that 2600.

Vic


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

I would leave it. At the moment v4 appears to be the same as v3 if you don't have OOMs in v3. Yes the autogen goes out a bit further but the only other feature is dynamic lighting which cuts your FPS in half.

I would stick with what you have for another 2 years and then upgrade for v5.

Share this post


Link to post

System ram is fine but that video card will be a little rough.  I've got a 2500K at 4GHz 8GB ram gtx 970 and I can do ok about middle to high sliders.  But my gtx 970 has 4GB video ram (sort of hehe)

update that gpu and you'd be ok


| FAA ZMP |
| PPL ASEL |
| Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 32GB 5600 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |

 

 

Share this post


Link to post
30 minutes ago, sanh said:

I would leave it. At the moment v4 appears to be the same as v3 if you don't have OOMs in v3. Yes the autogen goes out a bit further but the only other feature is dynamic lighting which cuts your FPS in half.

I would stick with what you have for another 2 years and then upgrade for v5.

Each person is entitled to their own opinion, of course, but V4 is certainly NOT the same as V3 on my system. I thought v3 was excellent but the visuals in v4 have v3 beat hands down. I do have a strong system so I expect I can see more bells and whistles but even then V4 just looks brighter and sharper.

Vic


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

My PC specs are:

Windows 10 home
Intel i5-2500k @3.3GHz
16.0GB Ram
AMD Radeon R9 270x
Asrock Fatal1ty motherboard

My PC is hmm about 3 maybe 4 years old. I run Prepar3d V4 as smooth as silk. Granted I don't have all the sliders up to full, but then with the quality of the visuals I get with the default sim settings, why would I need to change them. I have ORBX england installed and my PC sits at around 60-80 FPS. I get the occassional microstutter. I don't obsess about microstutters others might. I have never felt the urge to push P3D to the limit and as a result I have never had any VAS issues and In v2.3 I ran the PMDG 777 and had a couple of the UK2000 sceneries installed.

It is I suppose subjective as to how good the sim is with the specs we all have. No doubt someone with a killer machine will have 4k graphics and all the bells and whistles, but I don't need that to have an immersive experience. I care about the flight being reasonably smooth and giving me real world conditions using active sky.

I have far better performance in P3D (all V2.3 and V4) than I ever have in FSX.

Tom


Tom

 

Why not read some useful tips and tricks - http://forum.avsim.n...22#entry1965722

Share this post


Link to post

Well I came from FSX and have a 6-7 yr old PC and P4 runs MUCH smoother than FSX did for me. I installed expecting just to preview it as such without actually using it, but what I found surprised me.. that it outperforms FSX by a noticeable margin at higher settings than I used in FSX.

My spec is: i7 930 2.4ghz, 6GB RAM and Geforce GTX 750Ti with 4 SSD drives.

My expectation for your PC would be that it will run P3D v4 at LEAST as well as you currently run FSX, but the odds are it will be better. Your graphics card will definitely let you down a bit though, so that would be a good candidate to replace first.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...