Jump to content
Sign in to follow this  
jadolfo

P3Dv4 and FSUIPC problem

Recommended Posts

Hi,

I Have:

- Prepar3D v4 Pro 4.0.28.21686

- FSUIPC 5.103 registered

- LINDA 3.0.1 (711)

- Windows 10 Pro 64

The problem is if activate Autosave on FSUIPC, when the flight is saved, Linda reload LUA engine itself. All continue fine, but if the autosave is each 300 seconds, each 300 seconds LUA is reloaded.

Thanks and best,


J. Adolfo Medina

Share this post


Link to post
Share on other sites

Hi jadolfo,

Thank you for your report. This is a new one on me. You don't say what aircraft you are using but I have just tested the FSUIPC5 auto-save with the PMDG737NGX. The simulation does hesitate/pause for about a second to write the auto-save to disk but I am not seeing LINDA restarting. I am using the later FSUIPC5 5.103f Try installing the latest FSUIPC5 5.103g.

Please follow the diagnosis and reporting thread above, reproduce the problem a couple of times and email me the logs.


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

Hi,

On my sim, with default Baron 58 and PMDG B772 tested.

I will try to reproduce and send.


J. Adolfo Medina

Share this post


Link to post
Share on other sites

Hi,

I tried to reproduce the problem with the PMDG B772. Really is not problem of FSUIPC Autosave.

When I fly with this aircraft, my VRI MCP Combo 2 (Boeing), every few minutes disconnect and connect, I can ear a "ding-dong" sound from Windows, like when connect/disconnect an USB device.

When this happens, my VRI MCP stops working, freeze, and loses communication with LINDA.

I am not shure, but I remember to have this problem with default Baron, but I tried to reproduce on a flight (1 hour) , but nothing, all fine.

This problem is only with PMDG, then I suposse that is not a LINDA issue. This evening I will fly again for gets logs files an send it if the error come back.

Thanks an best regards.


J. Adolfo Medina

Share this post


Link to post
Share on other sites

The problem you are describing sounds like the Win10 power management issue. You need to use the Device Manager to find the USB your MCP panel is connected to,  the Power Management tab and disable power saving management. Neither LINDA nor FSUIPC will cause devices to disconnect and produce the bing-bong sound.


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

Hi,

After a lots of flights and testing, this is my problem:

Wlth PMDG 737 and 777, if the FSUIPC autosave is ON, when the session is saved, the sim make a little pause and the lua engine is reloaded.

The USB power saving is disabled on all my USBs devices.

This is the linda2.log file after the lats flight with PMDG 737:

[MAIN]  LINDA Version 3.0.1.711 initialising (@1707270900) ...
[MAIN]  LINDA can start ...
[MAIN]  Opening Main form
[MAIN]  LINDA 3.0.1.711 GUI starting...
[MAIN]  P3D 64-bit FSUIPC module files detected
[MAIN]  Fonts added
[MAIN]  News added
[MAIN]  HID DeviceCreateError - problem creating device
[MAIN]  HID OnArrival 3F36CB0=04D9/FA70
[MAIN]  HID OnArrival 3F36D70=068E/00F2
[MAIN]  HID OnArrival 3F36FB0=04D9/FA70
[MAIN]  HID OnArrival 3F36E30=06A3/0BAC
[MAIN]  HID OnArrival 3F371F0=04D9/FA70
[MAIN]  HID OnArrival 3F37130=047F/C006
[MAIN]  HID OnArrival 3F372B0=047F/C006
[MAIN]  HID OnDeviceChange - device added
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  hidEmunerateNodes - Device = 04D9/FA70[0]
[MAIN]  >>>HID IsJoystick test = 3F36CB0=04D9/FA70 = Mouse
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  hidEmunerateNodes - Device = 068E/00F2[0]
[MAIN]  >>>HID IsJoystick test = 3F36D70=068E/00F2 = Joystick
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  hidEmunerateNodes - Device = 04D9/FA70[0]
[MAIN]  >>>HID IsJoystick test = 3F36FB0=04D9/FA70 = Keyboard
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  hidEmunerateNodes - Device = 06A3/0BAC[0]
[MAIN]  >>>HID IsJoystick test = 3F36E30=06A3/0BAC = Joystick
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  hidEmunerateNodes - Device = 04D9/FA70[0]
[MAIN]  >>>HID IsJoystick test = 3F371F0=04D9/FA70 = 1
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  hidEmunerateNodes - Device = 047F/C006[0]
[MAIN]  >>>HID IsJoystick test = 3F37130=047F/C006 = 1
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  hidEmunerateNodes - Device = 047F/C006[0]
[MAIN]  >>>HID IsJoystick test = 3F372B0=047F/C006 = 5
[MAIN]  >>>hidConfigDftLoad() complete
[MAIN]  >>>hidConfigReload unsuccessful
[MAIN]  >>>hidConfigDftLoad() complete
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  >>>Restoring previous aircraft...
[MAIN]  >>>LoadModuleInfo - folder =\
[MAIN]  >>>Restore finished!
[MAIN]  Aircraft Selector initialized
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  Saitek Display set to -1
[MAIN]  >>>ConfigSysSave() completed
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  >>>btn 06A30BAC0-1=>>>00000000000000000000000
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 1 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 2 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 3 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 4 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 5 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 6 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 7 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 8 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 9 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 10 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 11 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 12 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 13 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 14 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 15 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 16 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 17 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 18 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 19 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 20 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 21 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 22 2
[MAIN]  >>>rl: 06A30BAC0-1=>>>00000000000000000000000 bit 23 2
[MAIN]  >>>ConfigSysSave() completed
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  >>>ConfigSysLoad() completed
[MAIN]  >>>hidSysConfigLoad() complete
[MAIN]  >>>hidConfigDftLoad() complete
[MAIN]  >>>hidConfigReload unsuccessful
[MAIN]  >>>hidConfigDftLoad() complete
[MAIN]  LINDA 3.0.1 GUI start completed ...
[MAIN]  LINDA GUI Main Timer started
[MAIN]  Opening Viewer form
[MAIN]  Opening Input form
[MAIN]  Opening Macros form
[MAIN]  Opening FSX Controls form
[MAIN]  Opening New Module form
[MAIN]  [TEST] Starting Add-ons Search
[MAIN]  [TEST] Addon Path (1) = C:\Users\Adolfo\AppData\Roaming\lockheed martin\prepar3D v4\add-ons.cfg
[MAIN]  [TEST] Valid Path Found (1) = C:\Users\Adolfo\AppData\Roaming\lockheed martin\prepar3D v4\add-ons.cfg
[MAIN]  [TEST] Processing Add-ons (1) = C:\Users\Adolfo\AppData\Roaming\lockheed martin\prepar3D v4\add-ons.cfg
[MAIN]  [TEST] Read Line = >>>[Package.0]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.0]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\A2A
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\A2A\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\A2A\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft found (1) = A2A_C172
[MAIN]  [TEST] Aircraft found (1) = A2A_C182
[MAIN]  [TEST] Aircraft found (1) = A2A_Piper_PA24_250_Comanche
[MAIN]  [TEST] Aircraft found (1) = A2A_Piper_PA28_180_Cherokee
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.1]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.1]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\LUKK Chisinau X
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\LUKK Chisinau X\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\LUKK Chisinau X\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.2]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.2]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\EPWA Warsaw Chopin Airport X
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\EPWA Warsaw Chopin Airport X\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\EPWA Warsaw Chopin Airport X\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.3]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.3]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\New York City X
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\New York City X\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\New York City X\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.4]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.4]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\UK2000 Common Library
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\UK2000 Common Library\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\UK2000 Common Library\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.5]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.5]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\UK2000 Manchester Xtreme
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\UK2000 Manchester Xtreme\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\UK2000 Manchester Xtreme\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.6]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.6]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\LatinVFR Barcelona P3D
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\LatinVFR Barcelona P3D\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\LatinVFR Barcelona P3D\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.7]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.7]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\FSDG
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\FSDG\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\FSDG\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.8]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.8]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\FSDG-Agadir
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\FSDG-Agadir\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\FSDG-Agadir\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 4 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.9]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.9]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\FSDG-Seychelles
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\FSDG-Seychelles\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\FSDG-Seychelles\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft found (1) = AI_SeychellesX_DHC6
[MAIN]  [TEST] Aircraft Dir processed (1) - 5 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>>[Package.10]<<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.10]<<<
[MAIN]  [TEST] Package found (1) = PATH=D:\Documents\Prepar3D v4 Add-ons\NY Airports v2 X
[MAIN]  [TEST] Package Dir Exists (1) = D:\Documents\Prepar3D v4 Add-ons\NY Airports v2 X\
[MAIN]  [TEST] Aircraft Dir found (1) = D:\Documents\Prepar3D v4 Add-ons\NY Airports v2 X\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (1) - 5 Aircraft found
[MAIN]  [TEST] Read Line = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Addon Path (2) = C:\ProgramData\lockheed martin\prepar3D v4\add-ons.cfg
[MAIN]  [TEST] Valid Path Found (2) = C:\ProgramData\lockheed martin\prepar3D v4\add-ons.cfg
[MAIN]  [TEST] Processing Add-ons (2) = C:\ProgramData\lockheed martin\prepar3D v4\add-ons.cfg
[MAIN]  [TEST] Read Line = >>>ÿþ <<<
[MAIN]  [TEST] Read Line (stripped) = >>><<<
[MAIN]  [TEST] Read Line = >>> [ P a c k a g e . 0 ]  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.0]<<<
[MAIN]  [TEST] Package found (2) = PATH=D:\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager
[MAIN]  [TEST] Package Dir Exists (2) = D:\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\
[MAIN]  [TEST] Aircraft Dir found (2) = D:\Documents\Prepar3D v4 Add-ons\FsDreamTeam Addon Manager\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (2) - 5 Aircraft found
[MAIN]  [TEST] Read Line = >>> T I T L E = F s D r e a m T e a m   A d d o n   M a n a g e r  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>TITLE=FsDreamTeam Addon Manager<<<
[MAIN]  [TEST] Read Line = >>> A C T I V E = t r u e  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>> R E Q U I R E D = f a l s e  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>> [ P a c k a g e . 1 ]  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>[Package.1]<<<
[MAIN]  [TEST] Package found (2) = PATH=C:\Program Files (x86)\12bPilot\SODE\P3Dv4
[MAIN]  [TEST] Package Dir Exists (2) = C:\Program Files (x86)\12bPilot\SODE\P3Dv4\
[MAIN]  [TEST] Aircraft Dir found (2) = C:\Program Files (x86)\12bPilot\SODE\P3Dv4\SimObjects\Airplanes\*
[MAIN]  [TEST] Aircraft Dir processed (2) - 5 Aircraft found
[MAIN]  [TEST] Read Line = >>> T I T L E = S O D E  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>TITLE=SODE<<<
[MAIN]  [TEST] Read Line = >>> A C T I V E = t r u e  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>ACTIVE=true<<<
[MAIN]  [TEST] Read Line = >>> R E Q U I R E D = f a l s e  <<<
[MAIN]  [TEST] Read Line (stripped) = >>>REQUIRED=false<<<
[MAIN]  [TEST] Read Line = >>> <<<
[MAIN]  [TEST] Read Line (stripped) = >>><<<
[MAIN]  [TEST] Add-ons Search completed
[MAIN]  Opening Editor form
[MAIN]  All Forms opened successfully
[MAIN]  Opening Console form
[MAIN]  LINDA application all set to run
[MAIN]  HIDSwitchDevice 1
[MAIN]  HID DeviceCreateError - problem creating device
[MAIN]  HID DeviceCreateError - problem creating device
[MAIN]  HID DeviceCreateError - problem creating device
[MAIN]  HID DeviceCreateError - problem creating device
 


J. Adolfo Medina

Share this post


Link to post
Share on other sites

If as you say, the autosave is triggering a LINDA LUA reload then I can not see it in the log above. This is something I have not seen in my testing. I admit I do turn off the autosave because of the time it takes and the annoying pauses in causes.

Please email me (see fault diagnosis and reporting thread) the fsuipc5.log and linda2.log. This allows me the search the logs. Pasting the log here just clutters the forum.


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

With the problem connected with Autosave I recommend you try the latest FSUIPC5 5.103j which includes a fix for PMDG aircraft for autosave. 


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

HI, 

Thanks for your answer. I will try the new FSUIPC5 v5.103j.

Best regards,


J. Adolfo Medina

Share this post


Link to post
Share on other sites

Hi,

Tested the new FSUIPC:

With aoutosave ON, when save the fligh the sim pause for few seconds but LINDA not reload lua.

Then the reload lua is solved.

Thanks you very much for your help!

Best regards,


J. Adolfo Medina

Share this post


Link to post
Share on other sites

Glad to have helped. 


Andrew Gransden

Scotland, UK

LINDA Support/Developer - VATSIM and BAVirtual - Airbus Flyer

i7 1TB SSD GTX980 - FSX/P3D - Aerosoft Airbus A318/A319/A320/A321 - FS2Crew

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...