Jump to content
Sign in to follow this  
aceridgey

Unable to Fly In V4 post 777 update

Recommended Posts

Ive seen some posts about lost of FPS after WIN10 Upgrade(Specially with 737)....   If reinstalling is not working yet in few minutes, then i will try a rollback for WIN10 and see...


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post

No luck.   Unistalled and deleted everything from PMDG.    Then downloaded and decided to go acrft by acrft and see if it was something else.

 

Well,  Test No.1 - PMDG 747   -->    Result:

l0OKHt1LQyqbGZrWiSQJDw.jpg

Same thing....   Fresh install...   during the load up seconds i get the CTD....

This is happening with PMDG only...  Geeeeee   


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post

Okay,

Next i tried was to unistall windows last updates, may be some malfunctions arounds were due to that, actually i unistalled the Flash Player update too:

zjS20HiJQaSLJpXUphQNGA.jpg

Before those updates my last update was in early june, so everything was fine from that date, so i did not mess with that.

Restarted, normal procedure, opened P3DV4 only(No AS or other addons), loaded PMDG and the result:

k09fSOs2TJWSf2Mx4yrb3g.jpg

 

:-(


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post

Final Test:

Unistalled 747 and reinstalled 772 Base only(No paints, no other addons loaded).    Loaded up, default scenery location, and the result:

v5H0HdvdRQGDwO5N0wRh0w.jpg

 

Well, this is definitelly something around PMDG....     I was flying last saturday.   Only difference is that the PC updated on July 13th  and the PMDG update released that i just installed today and pump.... not working anymore...

 

Okay,    S-O-S ...    Definitely something to do with last PMDG update according to results...


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post

My issue was slightly different to yours as I couldn't get past the loading screen of the scenario.. Lets see how we get on, tests start soon

 


Alex Ridge

Join Fswakevortex here! YOUTUBE and FACEBOOK

Share this post


Link to post
4 hours ago, Raphael_Chacon said:

Final Test:

Unistalled 747 and reinstalled 772 Base only(No paints, no other addons loaded).    Loaded up, default scenery location, and the result:

v5H0HdvdRQGDwO5N0wRh0w.jpg

 

Well, this is definitelly something around PMDG....     I was flying last saturday.   Only difference is that the PC updated on July 13th  and the PMDG update released that i just installed today and pump.... not working anymore...

 

Okay,    S-O-S ...    Definitely something to do with last PMDG update according to results...

It’s not being caused by PMDG. There’s something installed in your sim that’s causing the crash. If disabling addons isn’t working for you, I’d suggest a clean sim install then PMDG aircraft only. 

Share this post


Link to post

Hello,

I get the CTD  few seconds after load up(finished counting of PMDG load up), sometimes more seconds, sometimes less, but as soon as loaded, i can sit and xpect the CTD few seconds after.

Alex, let us know if reinstalling P3DV4 did it for you, so we could say its not about pmdg.     I just discovered that 737 works okay(getting the low FPS but is ok for now).... but 747/777 wont load up, im still getting CTDs...


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post

u9Wc25XHT46ULoW_DOtT5g.jpg

Definitely no luck.   After ORBX Vector is out, im not sure about reinstalling everything "to see if 777/747 work" or wait for PMDG to review the cases and continue flying the 737.

 


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post
6 minutes ago, Raphael_Chacon said:

u9Wc25XHT46ULoW_DOtT5g.jpg

Definitely no luck.   After ORBX Vector is out, im not sure about reinstalling everything "to see if 777/747 work" or wait for PMDG to review the cases and continue flying the 737.

 

Why not just try uninstalling and re-installing the P3d v4 CLIENT as if performing an update to P3d? I tried that at some stage when I had errors and it resolved all my issues. It's not required to do a full re-install..


Peter Webber

Prepar3D v5 & MSFS / Windows 10 Home Edition / CPU i7-7700K / MSI Z270 XPower Gaming Titanium / Samsung 970 EVO PLUS M.2 500GB / Corsair Vengeance DDR4 32GB 3000MHz / MSI Geforce GTX 1080Ti Gaming X

Share this post


Link to post

uninstalling and re-installing the Client is quick and no need to un-install any addons..i had an issue where P3d wouldn't even start up and re-installing the client worked. Took me 10 minutes.


Peter Webber

Prepar3D v5 & MSFS / Windows 10 Home Edition / CPU i7-7700K / MSI Z270 XPower Gaming Titanium / Samsung 970 EVO PLUS M.2 500GB / Corsair Vengeance DDR4 32GB 3000MHz / MSI Geforce GTX 1080Ti Gaming X

Share this post


Link to post

Excellent Pete.... i will try that when finishing flying :-)


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post

jummm...   Well, results were not positive.   Uninstalled/reinstalled client but still getting the CTDs when loading 747/777    :-(  


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post
24 minutes ago, Raphael_Chacon said:

jummm...   Well, results were not positive.   Uninstalled/reinstalled client but still getting the CTDs when loading 747/777    :-(  

Primarily because it isn't being caused by either one of them:

 


Kyle Rodgers

Share this post


Link to post

Hi Folks,

I posted a little while ago, but my post got deleted for some reason.

I have more information now, anyway.

Yesterday, I had an update message in the Ops center. I did the download, and install for the 747.  But, was unable to  start the flight as some parts would not work, missing instruments, etc.

Tried several  PMDG 747 re-installs still would not work.

Today, another update message in the Ops Center.  Downloaded again, and installed, BINGO, this one appears to be good. I am on a long haul now.  I think I better not do any more updates, until they are tested.

Jerry Friz

 

Share this post


Link to post
1 hour ago, scandinavian13 said:

Primarily because it isn't being caused by either one of them:

 

Thanks, but i tried everything about the error im getting.    i revised viewallreports via W10 and it states that the faulty archive is kernelbase.dll  each CTD.   

 

Inside the guide i found few steps to solve this kernelbase.dll and performed as indicated:

 

1- I had an outdated Nvidia Driver, but reinstalling didnt do it.  still getting CTDs with 747/777

2- Scanned my system for corrupt/missing files. Nothing found here, everything ok...

3- Disabled startup programs by typing msconfig in the Windows search box --> keept the basic.  Did not fix it neither

4-User Profile Corrupted – revised, did not find anything here, just some adjustment and nop, didnt fix it...

5- Removed all my scenery and some i couldnt disable were manually moved outside their original folder to force disabling.... but...  didnt do it.  Still getting CTDs with 747/777

6- removed Prepar3D.CFG and restarted -  Same thing...

 

If it is true that KERNELBASE.DLL is the faulty archive, and its nothing to do with P3D / PMDG, the solution is pointing to a very sad direction ...   :-(


Raphael Chacón

158745.png

FLYSIMWARE-SM#1378797 RXP750-#1533812 RXP530-#1526291 RXP430-#1543520 

FS2C #43560 #52175 #68068 #68152 #69299 #71201 #72243 #105040 SM#1325481

PMDG #60260 #73469 #144746 #194702 #196953 #230831 #236231 #251801 #266742 #336381  #397556

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...