Jump to content

Sign in to follow this  
asanal

Strange Problem

Recommended Posts

I was climbing 20,000 FT . I realized DC-6  VC cockpit  screen started slowly became dim. Then couple second after all screen was dark. I switched the view to outside momentarily  screen  turns normal then completely went dark again.

No  dark incident  happened with  747-400.I completed  KEWR-KSEA long flight with out any problem.

What is happening with DC-6 ? Will you please advise how to solve the problem.

Thanks


Ahmet Sanal

 

"Time you enjoyed wasting, was not wasted"

Share this post


Link to post
Share on other sites
10 minutes ago, asanal said:

I was climbing 20,000 FT . I realized DC-6  VC cockpit  screen started slowly became dim. Then couple second after all screen was dark. I switched the view to outside momentarily  screen  turns normal then completely went dark again.

No  dark incident  happened with  747-400.I completed  KEWR-KSEA long flight with out any problem.

What is happening with DC-6 ? Will you please advise how to solve the problem.

Thanks

If this was the X-Plane version, you passed out (virtually) from lack of oxygen. In other words, you either forgot to set up your pressurization, or something failed in the pressurization system.

Gray-out/Black-out is a stock feature of XP itself if you climb above 14,000 feet in an unpressurized aircraft. 


Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites
Just now, F16_Driver said:

The same goes for the P3D/FSX version.

In the case of XP hypoxia effects are a core feature of the sim. Apparently in the MSFS version, PMDG took a cue from X-Plane and coded the effect into the aircraft itself.


Jim Barrett

Licensed Airframe & Powerplant Mechanic, Avionics, Electrical & Air Data Systems Specialist. Qualified on: Falcon 900, CRJ-200, Dornier 328-100, Hawker 850XP and 1000, Lear 35, 45, 55 and 60, Gulfstream IV and 550, Embraer 135, Beech Premiere and 400A, MD-80.

Share this post


Link to post
Share on other sites

 

Jim.

Thank you, that is interesting.

 Pressurization was setup before  the take-off by AFE.

I will make a test flight .

 


Ahmet Sanal

 

"Time you enjoyed wasting, was not wasted"

Share this post


Link to post
Share on other sites

I made a test flight. Before take-off AFE verified Pressurizing  "Set" but he didn't. I set the pressurizing  and reached 20,000ft with out incident.

"Between you and me no more beer to him" 


Ahmet Sanal

 

"Time you enjoyed wasting, was not wasted"

Share this post


Link to post
Share on other sites

Yep, just had the same problem.  Easy enough, if you know to check for it!


Paul Davies CFMEII KMWH

Coolermaster Sniper Case | Corsair 750 W PSU | ASRock Z77 Extreme 4 Mobo | Core i7 3770 3.4 Ghz | Coolermaster Seidon 240 MM Liquid Cooled CPU Cooler | EVGA GTX 780 | GSkill 3 x 2 GB DDR3 | 2 x Velociraptor 500 GB HD | 2 x Samsung 840 Pro SSD 250 GB (1 Dedicated Windows, 1 Dedicated FSX/P3D) | Windows 7 64 Bit

 

Boeing777_Banner_Pilot.jpg       pmdg_trijet.jpg

Share this post


Link to post
Share on other sites

You as a pilot are responsible to set the correct pressurization altitude on the press panel. The AFE does not know in which FL you intend to fly.

What AFE checks is that the press panel is in the correct config .

  • Upvote 1

Chris Makris

PLEASE NOTE PMDG HAS DEPARTED AVSIM

You can find us at http://forum.pmdg.com

 

Share this post


Link to post
Share on other sites
15 hours ago, asanal said:

I made a test flight. Before take-off AFE verified Pressurizing  "Set" but he didn't. I set the pressurizing  and reached 20,000ft with out incident.

There's no way that he can know what level you intend to fly, so the response of 'set' by him is simply a read through of the checklist, assuming you've set it. At 'normal' DC-6 cruising levels, you could theoretically leave it at 0 and be fine. If you have terrain to clear, or MEAs/MOCAs/etc to follow, then you need to remind yourself to set it.

Best practice? Ensure you have oxygen to breathe by setting your pressurization for each flight.

I'm surprised by how many people are getting caught out by this one.


Kyle Rodgers

Share this post


Link to post
Share on other sites
1 hour ago, scandinavian13 said:

I'm surprised by how many people are getting caught out by this one.

I'm not, but then, I still remember all the complaints Henning got about the torque meters not working in the Aeroworx King Air. The problem was that they didn't switch on the inverters. (That gripe even ended up in the AVSIM review of the plane!)


Best Regards,

Kurt "Yoda" Kalbfleisch

San Diego, CA

Beta tester for PMDG J41 & NGX, Flight1 Super King Air B200, Flight1 Cessna Citation Mustang, Flight1 Cessna 182, Flight1 Cessna 177B, Aeroworx B200

Share this post


Link to post
Share on other sites

Wow.  A blacking-out feature!  Now that certainly fits the criteria of "as real as it gets"...

 

 

 

                                                                  Jerry Neidick

Share this post


Link to post
Share on other sites

No kidding - when I saw the fading I thought, no way did they model hypoxia, but sure enough - they did!  Obviously the remedy is to descend or turn on oxygen, but since autopilot is on and you can't see anything to change the autopilot, that is a difficult task!  If you leave the F9 button pushed on you get a glimpse of the cockpit and can toggle between F9 and scrolling around the view until you can see what you need to push.  Leave F9 pushed in and you should be able to move controls a little bit to begin a descent.  I got down lower and sure enough the cockpit went normal again.  Obviously this isn't how real hypoxia works - once you're out you're out, but hey, I didn't feel like exiting the sim and starting again!!


Paul Davies CFMEII KMWH

Coolermaster Sniper Case | Corsair 750 W PSU | ASRock Z77 Extreme 4 Mobo | Core i7 3770 3.4 Ghz | Coolermaster Seidon 240 MM Liquid Cooled CPU Cooler | EVGA GTX 780 | GSkill 3 x 2 GB DDR3 | 2 x Velociraptor 500 GB HD | 2 x Samsung 840 Pro SSD 250 GB (1 Dedicated Windows, 1 Dedicated FSX/P3D) | Windows 7 64 Bit

 

Boeing777_Banner_Pilot.jpg       pmdg_trijet.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...