Jump to content
Sign in to follow this  
DragoB

Installers needed for SkyHighSim sceneries

Recommended Posts

Thank you Krazyk for these two sceneries.

Regarding LYBE, the AFCAD (or ADEX, or AFX) file is missing, though. This file could be located in the main world/scenery folder, alternatively in the Addon Scenery/scenery folder. This should remove the default buildings and trigger the missing library objects. Might well be another terrain (CVX) file, too.

Would you - or anyone else with LYBE X v2 installed - upload this/these missing file/s (e.g. LYBE_ADEX.bgl or alike, possibly also LYBE_ADEX_CVX or alike) to this forum ?

Would be much appreciated. Thanks in advance.

Frank

  • Upvote 1

Share this post


Link to post

I'd like to restate effeme's request. IT appears that without the original scenery's afcad it won't display properly in v4. If anyone could post it I'd be grateful as well. 

 

 

Edit:

I found an updated AFCAD file here: https://flightx.net/index.php?thread/84019-skyhighsim-lybe-afcad/#post986603

 

Now all the addon buildings and jetways show. But I still have default buildings and ramp showing up and don't know what file could be the culprit, I've searched for and disabled all *lybe*.bgl I could find.

 

  • Upvote 1

Rui Laureano

Lisboa, Portugal

Share this post


Link to post

Hi Alex,

Thank you very much for the link to the afcad file. It works great in my FSX installation. I just dropped the file in the main LYBE V2 scenery folder.

The default buildings and ramp that still show up in your system might well come from some conflicting or duplicated afcad file. Could be in your main scenery/world/scenery folder.

Thanks again,

Frank

Share this post


Link to post

Did anyone get this scenery working in P3Dv4?

I have missing buildings and the whole airport looks "default" despite being added to the scenery library?

Share this post


Link to post

@Lionwing I had the same problem, check the order of your library, mine sits as follows from top to bottom:  LYTV X-Tivat, LYTV X-(Photoscenery), LYTV X-(LC), and 'Library' being the last. i have had some scenery conflicts within the area where patches of Orbx comes through, but its minimal.

give it a try and see what you think.

 

Birdy

Share this post


Link to post

I know this topic is a bit old but all the links to LYBE are dead. Is the any where else I can find the Scenery

Share this post


Link to post

First I wanted to get these sceneries from the links of this topic then when I went through my big HDD I realized I already have all three (must have saved them while SkyHighSim was still alive) 🙂

Don't know how they work in p3d v4, never tried.


Here you go:

LYBE https://mega.nz/#!hmQWwKbI!73fZwYRxVJJTaHDGewLd0JPLg_3j64TFDIJ3DP47Wg8

LYTV https://mega.nz/#!FyAwyCJI!W1COOMEl_p8U0KMGNXq3CUNmPmG2UDkb89-AOOwIic8

LDOS https://mega.nz/#!IzwGwSiL!-M7lhc7ZpqvJHMlX_R9fqlN-_hylDOMLQxWBXaXhuL0

  • Like 1

Share this post


Link to post
On 1/9/2019 at 10:32 PM, szcsongor said:

First I wanted to get these sceneries from the links of this topic then when I went through my big HDD I realized I already have all three (must have saved them while SkyHighSim was still alive) 🙂

Don't know how they work in p3d v4, never tried.


Here you go:

LYBE https://mega.nz/#!hmQWwKbI!73fZwYRxVJJTaHDGewLd0JPLg_3j64TFDIJ3DP47Wg8

LYTV https://mega.nz/#!FyAwyCJI!W1COOMEl_p8U0KMGNXq3CUNmPmG2UDkb89-AOOwIic8

LDOS https://mega.nz/#!IzwGwSiL!-M7lhc7ZpqvJHMlX_R9fqlN-_hylDOMLQxWBXaXhuL0

Thank you so much! 😁

Share this post


Link to post

Thanks! It works but I do have one problem, I see 6 fingers from the terminal doubled and also further from it, anyone has an idea why? In the scenery I have the library and the Lybe v2 ticked (I tried in both orders). The rest seems to be OK.

edit: solved it, I had the scenery twice, in 2 different folders (even if only one was ticked).

Edited by Vali

Valentin Rusu

AMD Ryzen 5900x OC, EVGA RTX 3080 Ti FTW3, DDR4 32GB @3200MHz, Samsung 840 PRO Raid for Win 10 Pro, Samsung 960 PR0 512GB NVMe SSD for P3D v4.5

Share this post


Link to post
On 5/5/2019 at 4:40 AM, Vali said:

Thanks! It works but I do have one problem, I see 6 fingers from the terminal doubled and also further from it, anyone has an idea why? In the scenery I have the library and the Lybe v2 ticked (I tried in both orders). The rest seems to be OK.

edit: solved it, I had the scenery twice, in 2 different folders (even if only one was ticked).

When I ran installer it says can't find P3d v1/v2/v3....so it is looking for other versions therefore won't install in V4....Anyway can go around that?

Edited by cyyzrwy24

Virtual Air Canada - Alex Luzajic

Share this post


Link to post
On 12/27/2017 at 9:49 AM, alex said:

I'd like to restate effeme's request. IT appears that without the original scenery's afcad it won't display properly in v4. If anyone could post it I'd be grateful as well. 

 

 

Edit:

I found an updated AFCAD file here: https://flightx.net/index.php?thread/84019-skyhighsim-lybe-afcad/#post986603

 

Now all the addon buildings and jetways show. But I still have default buildings and ramp showing up and don't know what file could be the culprit, I've searched for and disabled all *lybe*.bgl I could find.

 

Does anyone have the .bgl file linked to above please?

 

The link appears to be dead.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...