RXP

Official Panel Configuration Thread

Recommended Posts

Posted (edited)

A2A C172 configuration for the GNS 430/530.
https://www.avsim.com/forums/topic/532681-a2a-c172-rxp-gns-430530/

Also includes the GTN 650/750. This setup allows the use of the A2A C172 Aircraft Configurator app.
https://www.dropbox.com/s/6w13lx8ams1e7fh/A2A_C172_RXP_GTN_GNS.zip?dl=0

The following instructions are included in the ZIP file.

First things first. BACKUP the following files in the A2A 172 panel folder.
panel_default.cfg
panel_F1_650.cfg
panel_F1_750.cfg
panel_F1_dual.cfg
panel_MINDSTAR_430.cfg
panel_MINDSTAR_530.cfg
panel_MINDSTAR_dual.cfg

Important:
Regarding the panel_default.cfg file (if you DO NOT own the RXP GNS430 do not copy this file). This file provided in the package will install the RXP GPS400 and replace the default A2A GPS400. Otherwise if you own the GNS430 copy it to the panel folder.
The RXP GPS400 is included with the GNS430.

If you don't own all the RXP gauges, still install all .cfg files, this way if you decide to purchase additional RXP gauges the above files will be in place and ready to go.

Copy (Extract) the contents of this package to the \A2A\SimObjects\Airplanes\ folder.

You should now have the above .cfg files in the A2A172 panel folder, and 2 files; RealityXP.GNS.ini and RealityXP.GTN.ini in the main \A2A_C172 folder. These last 2 files are necessary for the popup gauges to work properly.

You may now use the C172 Aircraft Configurator app to install the gauge(s) of your choice.
For the RXP GTN 650/750 select the F1 650, 750, or both.
For the RXP GNS 430/530 select the MS 430, 530, or both.

As noted above if you own the GNS430 you can select default to install the GPS400.

Edited by RXP
  • Like 1
  • Upvote 2

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Posted (edited)

A2A C182 Skylane configuration for the GNS 430/530.
https://www.avsim.com/forums/topic/532747-a2a-c182-skylane-rxp-gns-430530/


Also includes configuration for the GTN 650/750. This setup allows the use of the C182 Aircraft Configurator_P3D app.

https://www.dropbox.com/s/uk96tb6utxagmmh/A2A_C182_Skylane_RXP_GTN_GNS.zip?dl=0

First things first. BACKUP the following files in the A2A_C182 panel folder.

panel_default.cfg
panel_F1_650.cfg
panel_F1_750.cfg
panel_F1_dual.cfg
panel_MINDSTAR_430.cfg
panel_MINDSTAR_530.cfg
panel_MINDSTAR_dual.cfg

Important:
Regarding the panel_default.cfg file (if you DO NOT own the RXP GNS430 do not copy this file). This file provided in the package will install the RXP GPS400 and replace the default A2A GPS400. Otherwise if you own the GNS430 copy it to the panel folder.

The RXP GPS400 is included with the GNS430.

If you don't own all the RXP gauges, still install all .cfg files this way if you decide to purchase additional RXP gauges the above files will be in place and ready to go.

Copy (Extract) the contents of this package to the \A2A\SimObjects\Airplanes\ folder.

You should now have the above .cfg files in the A2A_C182 panel folder, and 2 files; RealityXP.GNS.ini and RealityXP.GTN.ini in the main \A2A_C182 folder. These last 2 files are necessary for the popup gauges to work properly.

You may now use the C182 Aircraft Configurator_P3D app to install the gauge of your choice.

For the RXP GTN 650/750 select the F1 650, 750, or both.
For the RXP GNS 430/530 select the MS 430, 530, or both.
As noted above if you own the GNS430 you can select default to install the GPS400

Edited by bills511
  • Like 1
  • Upvote 2

Share this post


Link to post
Share on other sites
Posted (edited)

A2A 250 Comanche RXP GNS 430/530
https://www.avsim.com/forums/topic/532751-a2a-250-comanche-rxp-gns-430530/

Also includes configuration for the GTN 650/750. This setup allows the use of the Comanche 250 Aircraft Configurator_P3D app.
https://www.dropbox.com/s/r1drhrv9opxg803/A2A_250_Comanche_RXP_GTN_GNS430530.zip?dl=0

First things first. BACKUP the following files in the A2A_Piper_PA24_250_Comanche panel folder.

panel_default.cfg
panel_F1_650.cfg
panel_F1_750.cfg
panel_F1_dual.cfg
panel_MINDSTAR_430.cfg
panel_MINDSTAR_530.cfg
panel_MINDSTAR_dual.cfg

Important:
Regarding the panel_default.cfg file (if you DO NOT own the RXP GNS430 do not copy this file). This file provided in the package will install the RXP GPS400 and replace the default A2A GPS400. Otherwise if you own the GNS430 copy it to the panel folder.

The RXP GPS400 is included with the GNS430.

If you don't own all the RXP gauges, still install all .cfg files this way if you decide to purchase additional RXP gauges the above files will be in place and ready to go.

Copy (Extract) the contents of this package to the \A2A\SimObjects\Airplanes\ folder.

You should now have the above .cfg files in the A2A_Piper_PA24_250_Comanche panel folder, and 2 files; RealityXP.GNS.ini and RealityXP.GTN.ini in the main \A2A_Piper_PA24_250_Comanche folder. These last 2 files are necessary for the popup gauges to work properly.

You may now use the Comanche 250 Aircraft Configurator_P3D app to install the gauge of your choice.

For the RXP GTN 650/750 select the F1 650, 750, or both.
For the RXP GNS 430/530 select the MS 430, 530, or both.
As noted above if you own the GNS430 you can select default to install the GPS400.

Edited by RXP
  • Like 1
  • Upvote 1

Share this post


Link to post
Share on other sites
Posted (edited)

**Update**
New download link and instructions updated. The Comanche doesn't include a dual units setup.
https://www.dropbox.com/s/bbfti5mnlcks3ss/A2A_Comanche250_GNS_GTN.zip?dl=0

A2A 250 Comanche configuration for the GNS 430/530.
Also includes configuration for the GTN 650/750. This setup allows the use of the Comanche 250 Aircraft Configurator_P3D app.

First things first. BACKUP the 5 panel files in the A2A_Piper_PA24_250_Comanche panel folder. Not the panel.cfg.

1 panel_default.cfg and 4 panel_*.cfg files.

Important:
Regarding the panel_default.cfg file (if you DO NOT own the RXP GNS430 do not copy this file). This file provided in the package will install the RXP GPS400 and replace the default A2A GPS400. Otherwise if you own the GNS430 copy it to the panel folder.

The RXP GPS400 is included with the GNS430.

If you don't own all the RXP gauges, still install all .cfg files this way if you decide to purchase additional RXP gauges the above files will be in place and ready to go.

Copy (Extract) the contents of this package to the \A2A\SimObjects\Airplanes\ folder.

You should now have the above .cfg files in the A2A_Piper_PA24_250_Comanche panel folder, and 2 files; RealityXP.GNS.ini and RealityXP.GTN.ini in the main \A2A_Piper_PA24_250_Comanche folder. These last 2 files are necessary for the popup gauges to work properly.

You may now use the Comanche 250 Aircraft Configurator_P3D app to install the gauge of your choice.

For the RXP GTN 650/750 select the F1 650, or 750.
For the RXP GNS 430/530 select the MS 430, or 530.
As noted above if you own the GNS430 you can select default to install the GPS400.

Edited by RXP
  • Like 1
  • Upvote 2

Share this post


Link to post
Share on other sites

Thank you SO much Bill. You have done an outstanding job. Finally we can have the RXP panels to the favorite A2A fleet. Thank you so much !!!

  • Upvote 2

Share this post


Link to post
Share on other sites
On 12/5/2017 at 12:54 PM, ryanbatcund said:

Here's a mod to get the GNS530wV2 in the Baytower RV7 with working clickspots (P3D only - not tested in anything else).  It also addresses the inop gtx327 (that would usually crash P3D v4).  Credits also to Bert Pieke for the gtx327 mod and initial clickspot coding!

Place the rxp ini in the Vans_RV7 root folder and the rest in the panel.RV7_tip folder (backup originals).

FILE: https://www.dropbox.com/s/8uikmdvduo2p4i0/RXPGNSv2mod_panel.RV7_tip.zip?dl=0

It's then easy to make your own config for the rest of the variants.

37545884134_de21f82d46_o.jpgUntitled-1 by ryan b, on Flickr

If you want this mod try this new link (again this is for the RV7 (tail dragger)/Tip up - you can easily view the files and mod the rest of the variants though:

https://www.dropbox.com/s/iowfkkxsgve7ixj/RXPGNSv2mod_reup_panel.RV7_tip.zip?dl=0

  • Like 1

Share this post


Link to post
Share on other sites

Which simulator?  Which GNS v2 gauge?  

Would you please indicate what steps you have completed so far based on the instructions in the guide?  From ;your system desktop. left click the Windows icon at the bottom left corner of your monitors screen, scroll the resulting list of your installed programs to the R's. Select ReailityXP and from the drop down start GNS Users Manual.

Share this post


Link to post
Share on other sites
Posted (edited)

@tjsratman
1. Run the CAR_XP.exe first.
2. Copy and paste the entire contents of the following panel.cfg. This includes popup click spot for the Carenado G500. Click spot is top border (bezel). Also for the GNS units.
I also have a configuration for the REX Advantage weather radar (not included in this setup).

Spoiler

//*********************************************************
// CARENADO P46T MALIBU JETPROP DLX
// Copyright © Carenado 2012 - All Rights Reserved
//*********************************************************

[Window Titles]
Window00=G500
Window01=Toggle_Manual
Window02=Toggle_Control
Window03=RXP GNS 530
Window04=RXP GNS 430
Window05=INFO

[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000

//--------------------------------------------------------
[Window00]
Background_color=0,0,0 
size_mm=1024,1024
window_size_ratio=1.000  
position=8
visible=0
ident=MAIN_PANEL
window_size= 0.410, 0.545
window_pos= 0.255, 0.455
no_luminous=1

gauge00=G500_P46T!g500_config,  0,0,1,1
gauge01=G500_P46T!g500,  0,0,1024,1024
gauge02=PA46T!ToggleCARG500,  0,0,1024,50

//--------------------------------------------------------
[Window01]
Background_color=0,0,0 
size_mm=713,1000
position=0
visible=0
ident=793
window_size= 0.351, 0.817
window_pos= 0.520, 0.020
zorder=5

gauge00=PA46TManual!manual,  0,0,711,998

//--------------------------------------------------------
[Window02]
Background_color=0,0,0 
size_mm=500,261
position=0
visible=0
ident=796
window_size= 0.198, 0.137
window_pos= 0.010, 0.145
zorder=5

gauge00=PA46T!Control_windows,  0,0,500,261

//--------------------------------------------------------
[Window03]
Background_color=0,0,0 
size_mm=100,100
position=7
visible=0
ident=10020
window_size= 0.255, 0.346
window_pos= 0.000, 0.455
zorder=99

gauge00=rxpGNS2!GNS_530_1,  0,0,100,100
gauge01=PA46T!ToggleXP530,  0,0,512,30

//--------------------------------------------------------
[Window04]
Background_color=0,0,0 
size_mm=100,100
position=7
visible=0
ident=10030
window_size= 0.255, 0.199
window_pos= 0.000, 0.801
zorder=99

gauge00=rxpGNS2!GNS_430_2,  0,0,100,100
gauge01=PA46T!ToggleXP430,  0,0,512,30

//--------------------------------------------------------
[Window05]
file=info.bmp 
size_mm=419,181
window_size_ratio=1.000  
position=0
visible=1
ident=142
window_size= 0.250, 0.120
window_pos= 0.010, 0.020

//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_1

gauge00=GAUGEP46T!Gauge_Eng13D,  768,343,256,343
gauge01=GAUGEP46T!Gauge_Eng23D,  768,0,256,343
gauge02=GAUGEP46T!Gauge_Volts_Amps,  7,521,318,279
gauge03=GAUGEP46T!Gauge_Anum_L,  87,805,328,212
gauge04=GAUGEP46T!Gauge_Button_Anum,  422,803,600,217
gauge05=GAUGEP46T!Gauge_Clock,  332,518,279,279
gauge06=PA46TJ!GPSVSI,  0,0,2,2

//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_2

gauge00=WX_Gauge_3D_P46T!WXGauge,  9,9,492,309
gauge01=;GPS_530_3D_P46T!gps_500,  7,337,493,358    //GPS_530_3D_P46T!gps_500,  7,337,493,358
gauge02=Radio_P46T!RadioAdf,  524,670,496,100
gauge03=;GPS_430_3D_P46T!GNS430_nc2,  517,259,497,258    //GPS_430_3D_P46T!GNS430_nc2,  517,259,497,258
gauge04=DIGTTRANS_P46T!transponder,  516,529,501,126
gauge05=Radio_P46T!RadioTrans,  520,126,496,112
gauge06=Radio_P46T!RadioAudio,  520,8,498,98
gauge07=GAUGEP46T!Gauge_Anum_R,  381,786,635,229
gauge08=GAUGEP46T!Gauge_Engine_Trend,  14,711,299,298

//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_3

gauge00=GAUGEP46T!Gauge_Autopiloto,  0,0,512,119
gauge01=GAUGEP46T!Gauge_Anum,  0,120,384,177
gauge02=GAUGEP46T!Gauge_Anum_APSEL,  0,299,384,174
gauge03=P46T_Cabin_alt!C340_PRESS,  0,0,1,1

//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_4

gauge00=rxpGNS2!GNS_530_1,  18,335,482,358
gauge01=rxpGNS2!GNS_430_2,  500,263,527,257

//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_5

gauge00=G500_P46T!g500_config,  0,0,10,10
gauge01=G500_P46T!g500_3D,  0,0,768,515
gauge02=PA46T!ToggleCARG500,  0,0,1024,50


Day=255,255,255
Night=223,255,255
Luminous=246,115,119

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

yCUkEgP.jpg

0otoR7e.jpg

Edited by Bills511
  • Upvote 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now