Jump to content

Sign in to follow this  
spilok

Wide View Aspect or not

Recommended Posts

I have a 27"diagonal Asus monitoir (2560 x 1440 resolution).  Should I be using Wide View Aspect in Pd3v4 display settings?  I've tried it both ways and having Wide View OFF seems more realistic to me.  Of course, I have to play with the best Zoom percentage to achieve the view I like.

What kind of monitor qualifies for the Wide View setting?  Also, what are your best Zoom settings both in VC and Spot views?

I'd like to hear your opinion on these questions.

Stan

Share this post


Link to post

2560 x 1440 is 16 x 9, the definition of wide aspect screen.


Dan Downs KCRP

Share this post


Link to post
55 minutes ago, spilok said:

What kind of monitor qualifies for the Wide View setting?  Also, what are your best Zoom settings both in VC and Spot views?

WideViewAspect has nothing to do with the type of monitor you have. It determines whether the 'zoom' number relates to the width of the monitor or to the height. By default it is width, but with WideViewAsepct selected it is height. There is no difference in the projected image but because the image displays at the default zoom factor it will look different when you change the setting. If you set WideViewAspect on you can always achieve the same view as you had before by zooming in. The reverse is not true as you cannot zoom out to more that 0.3x (I am presuming P3D is the same as FSX in this regard).

Or the short answer: the only reason you would need WideViewAspect is if you cannot zoom out far enough to get the view you want.


MarkH

gGzCVFp.jpg
Core i7-7700K / 32Gb DDR4 / Gigabyte GTX1070 / 1080p x 3 x weird / Win7 64 Pro

Share this post


Link to post

I saw that video recently too.

at 16:9 turn Wide View on and keep your Zoom at 1.0.

The only thing you should be changing is your 'eye point' not your zoom!


Neil Andrews.

Fight or Flight - YouTube | Twitter

Share this post


Link to post

Watched the video too....I'm assuming you have to change Wide Aspect to TRUE in the P3dv4 config.   When I do that, and check wide aspect in the sim, my best setting is 0.56.  1.00 bring the VC up too close and the outside doesn't look right to me.

Stan

  • Upvote 1

Share this post


Link to post
45 minutes ago, spilok said:

....I'm assuming you have to change Wide Aspect to TRUE in the P3dv4 config

There is an option to tick the box in the options drop down menue..'general..Display..

bob

  • Upvote 1

Share this post


Link to post
49 minutes ago, spilok said:

1.00 bring the VC up too close and the outside doesn't look right to me.

Try setting to 1.00 and just adjusting the eyepoint.

(default settings are ctrl + Enter and ctrl + Backspace) but ultimately, use whatever zoom settings looks good for you.

  • Upvote 1

Neil Andrews.

Fight or Flight - YouTube | Twitter

Share this post


Link to post
Guest

I have wilde view on and use a zoom of 0.7 simply because this looks the best to me. A zoom of 1.0 just doesn't work for me because I hardly see anything of the cockpit and the outside view doesn't look to good. At 0.7 I can see what I want to see of the cockpit and the scenery looks nice and crips. The gauges aren't too distorted either when I look around with my TrackIR: if I zoom out more gauges become oval and you begin to get a fish eye lenses effect.

I don't really care what is the most realistic, as that video tries to explain, because, let's face it, how realistic is it to look at the world through a small box... 1.0 may be realistic when you have a 360 view around you but not on a flat 2D monitor that only shows you a very small part of that 360 view. 

Obviously it all also depends on the size of the monitor and the distance you sit from it. The linked video's are interesting but in the end I would simply pick a setting you like. After all, that's what it's all about.

Share this post


Link to post

I am at 1440p and Widescreen and also have the best (realistic) results with TRackIR using 0.7 in the virtual cockpit.


Regards,

Chris Keller

--

i7-4790K@4.3 GHz, 32GB DDR3 RAM, GTX1080TI 11GB VRAM, SSD, G-SYNC 1440p monitor

Share this post


Link to post

I have three 2550 x 1400 monitors.

I stretch the image across all three.

I have to have wide aspect view enabled or I can't see the gauges :gaul:

Share this post


Link to post

In the past I was using wide aspect but I was having problems with the NGX and Q400 HUD's. While taxing the HUD displays would move left and right off the HUD glass when turning. I actually put up with it for a few years and then about 1 year ago I discovered by accident that if I don't use wide aspect I don't have the problem with the HUD's


Pete Richards

Aussie born, Sydney ( YSSY ) living in Whitehorse, Yukon ( CYXY )

Windows 10 Pro loaded on a Sabrent 1TB Rocket Nvme PCIe 4.0, Ryzen 9 3900X, MSI MEG X570 Unify Motherboard,  EVGA GTX 1080ti FTW3, 64GB DDR4-3600 Trident Z NEO Series, 1TB Samsung 960 Pro NVMe for MSFS2020, 4TB Seagate BarraCuda HD, Corsair RMx 750W PSU, Corsair H115i Liquid cooling, NZXT H440 Case.

 

 

Share this post


Link to post
4 hours ago, J van E said:

I have wide view on and use a zoom of 0.7 simply because this looks the best to me. A zoom of 1.0 just doesn't work for me because I hardly see anything of the cockpit and the outside view doesn't look to good. At 0.7 I can see what I want to see of the cockpit and the scenery looks nice and crips. The gauges aren't too distorted either when I look around with my TrackIR: if I zoom out more gauges become oval and you begin to get a fish eye lenses effect.

I don't really care what is the most realistic.....

Yep ! That's what I am also using. Best setting imho !

Mike


Mike Lab

WIN10 / I7-6700K HT ON / GTX980 / 16 GB RAM / 3 x SAMSUNG EVO 1TB SSD / 1 X WD BLACK 2TB HDD / 32"  60hz Monitor @ 2560x1440 / P3Dv4.4  No AM, Locked to 59 FPS, VSync ON, Triple buffering enabled

Process Lasso used to unload all other applications than P3D running on core 0

Share this post


Link to post

Eureka.  I have found it.  With Wide Aspect =TRUE in the config, and Wide Aspect checked in the sim, my MAGIC number for Zoom is ...................................................................0.70.  

Thanks for all the help.  0.70 seems to give me the best of all worlds in VC, Spot, and Wing Views.

 

Stan

Share this post


Link to post


for what it's worth I use 3 monitors and use view groups ( so as not to get stretched views )I don't use nvidia surround ,or single view stretched across the three as this stretches things .3 @1920 by 1080 and views are great .I do have wideview enabled and zoom in to between .90 and .60 .I've tried many things and if you have multiple monitors and a decent Graphics card view groups are the way to go ,with wide view enabled .

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    28%
    $7,125.00 of $25,000.00 Donate Now
×
×
  • Create New...