RXP

Official Panel Configuration Mods

Recommended Posts

Modification of the panel.cfg for a GTN 750 in the Carenado Saab 340.

I put all my GTN on SHIFT+9

//*********************************************************
// Carenado SF34 FSX/P3D
// Copyright © Carenado 2018 - All Rights Reserved
//*********************************************************

[Window Titles]
Window00=EADI EHSI
Window01=AUTOPILOT & SELECT PANEL
Window02=WINDOWS MANAGER
Window03=INFO
Window04=ENGINE SETUP
Window05=START


Window08=Reality XP GTN Unit 1 (managed)


[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000


//--------------------------------------------------------
[Window00]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
ident=MAIN_PANEL
position=6
no_luminous=1
 
window_size= 0.38, 0.680
window_pos=  0.20, 0.320

gauge00=GAUGEEADISF34!Gauge_EFIS550_EADI,     0,  0,609,512
gauge01=GAUGEHSISF34!Gauge_EFIS84_EHSI_GTN,     0,512,609,512
gauge02=CARSF34!ToggleCARG500,  0,0,512,128


// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window01]
Background_color=0,0,0 
size_mm=909,1555 
visible=0
ident=10030
position=7
no_luminous=1

window_pos=  0.700, 0.020
window_size= 0.247, 0.750

gauge00=GAUGE_AUTOPILOT_SAAB340!Gauge_MODE_SELECT_PANEL_GTN,                0,   0,909,258
gauge01=GAUGE_AUTOPILOT_SAAB340!Gauge_DISPLAY_CONTROL_PANEL_GTN,            0, 258,909,294
gauge02=GAUGE_AUTOPILOT_SAAB340!Gauge_COURSE_HEADING_PANEL,            0, 552,909,201
gauge03=GAUGE_AUTOPILOT_SAAB340!Gauge_AUTOPILOT_CONTROL_PANEL_GTN,        0, 753,909,304
gauge04=GAUGE_AUTOPILOT_SAAB340!Gauge_CONTROL_PANEL_WX,                0,1057,909,276
gauge05=GAUGE_AUTOPILOT_SAAB340!Gauge_ALT_ALERT,                           0,1333,512, 222

gauge06=CARSF34!Toggle10030,  10,10,909,32


draw_order00=gauge02, gauge03

// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
//--------------------------------------------------------
[Window02]
Background_color=0,0,0 
size_mm=581,232
position=0
visible=0
ident=796

window_size= 0.303, 0.215
window_pos = 0.010, 0.165
zorder=5

gauge00=CARSF34!Control_windowsgtn,  0,0,581,232

// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window03]
Background_color=4,4,4
size_mm=468,266
window_size_ratio=1.000  
position=0
visible=0
ident=10150

window_size= 0.247, 0.250
window_pos=  0.010, 0.020


gauge00=CARSF34!WindowManager,   0,  0, 468,266

// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window04]
Background_color=0,0,0 
size_mm=700,700

window_size= 0.365, .648

position=6
visible=0
nomenu=1
ident=10060

gauge00=CARSF34!StartWindowsAircraft,   0,  0, 700,700


//--------------------------------------------------------
[Window05]
Background_color=0,0,0 
size_mm=526,426

window_size= 0.274, .394

position=4
visible=0
nomenu=1
ident=10050

gauge00=CARSF34!StartWindows,   0,  0, 526,426

[Window08]
Background_color=0,0,0
size_mm=937,887
ident=14401
window_pos= 0.660, 0.160
window_size= 0.340, 0.580
zorder=99
gauge00=rxpGTN!GTN_750_1, 0, 0,937,887
gauge01=CARF50!ToggleGTN750,             100,0,737,50


//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_1


gauge00=;PROLINE21_SF34!Proline_Config,  0,0,10,10
gauge01=PROLINE21_SF34!Proline_Common_Update,  0,0,10,10
gauge02=;PROLINE21_SF34!Proline_C_Patch,  0,0,10,10


gauge03=GAUGEEADISF34!Gauge_EFIS550_EADI,     0,  0,571,480
gauge04=GAUGEHSISF34!Gauge_EFIS84_EHSI_GTN,        0,481,571,480

gauge05=CARSF34!ToggleCARG500,              0,  0,571,480


//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_2

gauge00=GAUGE_SAAB340!Gauge_Anum,                 0,  0,894,891
gauge01=GAUGE_SAAB340!Gauge_TEMP1_DIG,           0,  876,255, 56
gauge02=GAUGE_SAAB340!Gauge_TEMP2_DIG,           259,  876,255, 56
gauge03=GAUGE_SAAB340!Gauge_CABIN_DIFF_DIG,     0,  939,131, 64
gauge04=GAUGE_SAAB340!Gauge_TOTAL_FUEL_USED_DIG,     520,  874,264, 114
gauge05=GAUGE_SAAB340!Gauge_BAT_FUEL_TEMP_PANEL,     133,  939,61, 29

//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_3

gauge00=;FMCSF34!FMC_configF50,  0,0,1,1
gauge01=;FMCSF34!FMC_UN1VC,  0,297,512, 404


gauge02=CarSound_SF34!CarSound,  0,0,5,5
gauge03=CarSound_SF34CALL!CarSound,                       2,2,5,5

//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_4

auge00=;GAUGEC2!Radio_CTL32_DME,                 719,768, 279,128
gauge01=;GAUGEC2!Radio_CTL32_DME2,                 719,896, 279,128
gauge02=GAUDE_SF340_RADIOS!Radio_CTL22_COM1,                0  , 0  , 214, 228
gauge03=GAUDE_SF340_RADIOS!Radio_CTL22_COM2,                0  , 230, 214, 228
gauge04=GAUDE_SF340_RADIOS!Radio_CTL32_NAV1,                  220, 0  , 214, 228
gauge05=GAUDE_SF340_RADIOS!Radio_CTL32_NAV2,                  230, 230, 214, 228
gauge06=GAUDE_SF340_RADIOS!Radio_CTL62_ADF,                 440, 0  , 214, 228
gauge07=GAUDE_SF340_RADIOS!Radio_CTL92_ATC,                 440, 230, 214, 228
gauge08=GAUDE_SF340_RADIOS!Radio_CTL92_ATC,                 660, 0  , 214, 228
gauge09=;GAUDE_SF340_RADIOS!Radio_CTL92_ATC,                 660, 230, 214, 228

gauge10=GAUGE_SAAB340!Gauge_UPDATE_SF34_DIG_GTN,                   0,  0,1 , 1
gauge11=GAUGE_SAAB340!Gauge_Anum_MASTER_WARNING,            2,  0,215 , 188
gauge12=GAUGE_SAAB340!Gauge_Anum_MASTER_CAUTION,          216,  0,215 , 188
gauge13=CarSound_SF34B!CarSound,  0,0,5,5
gauge14=SF34EFIS!EFIS_WX,  0,0,5,5


//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_5

gauge00=GAUGE_AUTOPILOT_SAAB340!Gauge_MODE_SELECT_PANEL_GTN,                0,   0,512,145
gauge01=GAUGE_AUTOPILOT_SAAB340!Gauge_DISPLAY_CONTROL_PANEL_GTN,            0, 147,512,166
gauge02=GAUGE_AUTOPILOT_SAAB340!Gauge_CONTROL_PANEL_WX,                0, 316,512,155
gauge03=GAUGE_AUTOPILOT_SAAB340!Gauge_AUTOPILOT_CONTROL_PANEL_GTN,        0, 473,512,171


//--------------------------------------------------------
[Vcockpit06]
Background_color=0,0,0 
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$Panel_6

gauge00=rxpGTN!GTN_750_1, 0, 0,667,794,NO_BEZEL



Day=255,255,255
Night=223,255,255
Luminous=246,115,119

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

Edited by RXP
  • Upvote 1

Share this post


Link to post
Share on other sites

Modification of the panel.cfg for a GTN750 in the Carenado S550.

I put all my GTN on SHIFT+9.

//*********************************************************
// Carenado S550 Citation II V2.0 FSX/P3D
// Copyright © Carenado 2017 - All Rights Reserved
//*********************************************************

[Window Titles]
Window00=MFD640
Window01=EADIEHSI
Window02=AUTOPILOT
Window03=SYSTEM UNIVERSAL
Window04=TOGGLE_CONTROL
Window05=INFO
Window06=ENGINE SETUP
Window07=START

Window08=Reality XP GTN Unit 1 (managed)

VIEW_FORWARD_DIR=-1.000, 0.000, 0.000

//--------------------------------------------------------
// windows_sizeY*size_mmX/size_mmY*9/16
//--------------------------------------------------------
[Window00]
Background_color=0,0,0 
size_mm=619,480
position=4
visible=0
window_size= 0.362, 0.500
window_pos=  0.010, 0.250

ident=MAIN_PANEL
no_luminous=1


gauge00=MFD640_C550!MFD640_config,        0,    0,   1,  1
gauge01=MFD640_C550!MFD640,             0,    0, 619,480
gauge02=MFD640_C550!ToggleMFD640,        0,    0, 619,30

//--------------------------------------------------------
[Window01]
Background_color=0,0,0 
size_mm=512,1024
visible=0
ident=10030
position=6
no_luminous=1

window_size= 0.19, 0.680
window_pos=  0.40, 0.320


gauge00=GAUGEC2EADI!Gauge_EFIS550_EADI,     0,  0,512,512
gauge01=GAUGEC2EHSI!Gauge_EFIS550_EHSI,     0,512,512,512
gauge02=C2CAR!ToggleEFIS,  0,0,512,64

//--------------------------------------------------------
[Window02]
Background_color=0,0,0 
size_mm=640 , 755
visible=0
ident=10130
position=5
no_luminous=1

window_size= 0.238, 0.500
window_pos=  0.650, 0.450

gauge00=GAUGEC2AP!Gauge_AP_MODE_SELECTOR_BG,           0,  0,640,237
gauge01=GAUGEC2AP!Gauge_AP_CONTROL_PANEL_BG,           0,237,640,290    
gauge02=GAUGEC2AP!Gauge_AP_SPERRY_PANEL_BG,                 0,526,512,228
gauge03=;GAUGEC2AP!Gauge_Update,                            0,  0,  1,  1
gauge04=C2CAR!Toggle10130,                                0,  0,640, 16

[Window03]
size_mm=768,379
Background_color=4,4,4 
position=2
visible=0
ident=10300
no_luminous=1

window_size= 0.285, 0.250
window_pos=  0.010, 0.750

gauge00=GAUGEC2EFI!DC1004_DCPanel,  0,  0,768,150
gauge01=GAUGEC2EFI!DC1005_DCPanel,  0,151,768,148
gauge02=GAUGEC2EFI!DCADI_TEST_DH,   0,299,768, 80
gauge03=C2CAR!Toggle10300,          0,  0,768, 16

//--------------------------------------------------------
[Window04]
Background_color=0,0,0 
size_mm=500,261
position=0
visible=0
ident=796

window_size= 0.198,0.165
window_pos= 0.010, 0.145
zorder=5

gauge00=C2CAR!Control_windows,  0,0,500,261

//--------------------------------------------------------
[Window05]
file=info.bmp 
size_mm=419,181
window_size_ratio=1.000  
position=0
visible=0
ident=10020
window_size= 0.250, 0.120
window_pos=  0.010, 0.020

gauge00=C2CAR!ToggleCAR530,  10,10,400,100

//--------------------------------------------------------
// windows_sizeY*size_mmX/size_mmY*9/16
//--------------------------------------------------------

//--------------------------------------------------------
[Window06]
Background_color=0,0,0 
size_mm=600,490
window_size= 0.344, .500
position=3
visible=0
nomenu=1
ident=10060

gauge00=GAUGEC2!StartWindowsAircraft ,   0,  0, 600,490


//--------------------------------------------------------
[Window07]
Background_color=0,0,0 
size_mm=600,490
window_size= 0.355, .500
position=5
visible=0
nomenu=1
ident=10050

gauge00=GAUGEC2!StartWindows ,   0,  0, 600,490

//--------------------------------------------------------
[Window08]
Background_color=0,0,0
size_mm=937,887
ident=14401
window_pos= 0.660, 0.160
window_size= 0.340, 0.580
zorder=99
gauge00=rxpGTN!GTN_750_1, 0, 0,937,887
gauge01=C441IIALA!ToggleGTN750,             100,0,737,50


//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_1


gauge00=GAUGEC2EADI!Gauge_EFIS550_EADIVC,     0,  0,512,480
gauge01=GAUGEC2EHSI!Gauge_EFIS550_EHSIVC,     0,482,512,480
gauge02=C2CAR!ToggleEFIS,  0,0,512,64
gauge03=MFD640_C550!MFD640_config,        0,    0,   1,  1
gauge04=MFD640_C550!MFD640,           512,  0, 512,397
gauge05=MFD640_C550!ToggleCARG500,        0,    0, 512,30
gauge06=GAUGEC2!Gauge_VSI_DIGITAL,    512,397, 320,320
gauge07=GAUGEC2!Gauge_UPDATE_DIG,               0,  0,   1,   1
gauge08=C2_Cabin_alt!C340_PRESS,  0,0,1,1
gauge09=CarSound_C2!CarSound,                       2,2,5,5
gauge10=S550_CE550!CE550,                       0,0,1,1

//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_2

gauge00=GAUGEC2!Radio_CTL32_DME,                 719,768, 279,128
gauge01=GAUGEC2!Radio_CTL32_DME2,                 719,896, 279,128
gauge02=GAUGEC2!Radio_CTL22_COM1,                482, 514, 236,252
gauge03=GAUGEC2!Radio_CTL22_COM2,                482, 768, 236,252
gauge04=GAUGEC2!Radio_CTL32_NAV1,                    4, 514,236,252
gauge05=GAUGEC2!Radio_CTL32_NAV2,                    4, 768,236,252
gauge06=GAUGEC2!Radio_CTL92_ATC,                 243, 514,236,252
gauge07=GAUGEC2!Radio_CTL62_ADF,                 243, 768,236,252
gauge08=GAUGEC2!Gauge_ALTIMETER_DIGITAL,             0,   0,269,269
gauge09=GAUGEC2!Gauge_CLOCK_DIG,                        0, 271,239,238
gauge10=GAUGEC2!Gauge_TURBINE_DIG,               270,   0,184, 61
gauge11=GAUGEC2!Gauge_FAN_RPM_DIG_BG,            270,  62,191, 66
gauge12=GAUGEC2EFI!DC1004_DCPanel,                 462,   0,512, 100
gauge13=GAUGEC2AP!Gauge_AP_SPERRY_PANEL_BGVC,   270, 129,293, 130
gauge14=GAUGEC2EFI!DCADI_TEST_DH,                564, 211,460, 49 
gauge15=GAUGEC2!Gauge_Anum_MASTER_WARNING,        0,  0,   1,1
gauge16=GAUGEC2!Gauge_ANUM_BG,                    270,261, 753,253

draw_order00=gauge09, gauge16

//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_3

gauge00=;FMCC2!FMC_configC2,      0,0,1,1
gauge01=;FMCC2!FMC_UN1VC,         0,0,512, 404
gauge02=;C2CAR!ToggleFMS,        0,0,512,  32

//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_4

gauge00=GAUGEC2AP!Gauge_AP_MODE_SELECTOR_BGVC,           0,  0,512,190
gauge01=GAUGEC2AP!Gauge_AP_CONTROL_PANEL_BGVC,           0,192,512,232    
gauge02=GAUGEC2AP!Gauge_Update,                            0,  0,  1,  1
gauge03=C2CAR!Toggle10130,                                0,  0,512, 16

//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0 
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$Panel_5

gauge00=rxpGTN!GTN_750_1, 0, 0,667,794,NO_BEZEL
gauge01=C2CAR!Toggle10400,     64,0, 512, 32



Day=255,255,255
Night=223,255,255
Luminous=246,115,119

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

Edited by RXP
  • Upvote 1

Share this post


Link to post
Share on other sites
On 9/13/2018 at 10:11 AM, darem said:

Modification of the panel.cfg for a GTN 750 in the Carenado Saab 340.

I put all my GTN on SHIFT+9

 

  Reveal hidden contents

 

//*********************************************************
// Carenado SF34 FSX/P3D
// Copyright © Carenado 2018 - All Rights Reserved
//*********************************************************

[Window Titles]
Window00=EADI EHSI
Window01=AUTOPILOT & SELECT PANEL
Window02=WINDOWS MANAGER
Window03=INFO
Window04=ENGINE SETUP
Window05=START


Window08=Reality XP GTN Unit 1 (managed)


[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000


//--------------------------------------------------------
[Window00]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
ident=MAIN_PANEL
position=6
no_luminous=1
 
window_size= 0.38, 0.680
window_pos=  0.20, 0.320

gauge00=GAUGEEADISF34!Gauge_EFIS550_EADI,     0,  0,609,512
gauge01=GAUGEHSISF34!Gauge_EFIS84_EHSI_GTN,     0,512,609,512
gauge02=CARSF34!ToggleCARG500,  0,0,512,128


// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window01]
Background_color=0,0,0 
size_mm=909,1555 
visible=0
ident=10030
position=7
no_luminous=1

window_pos=  0.700, 0.020
window_size= 0.247, 0.750

gauge00=GAUGE_AUTOPILOT_SAAB340!Gauge_MODE_SELECT_PANEL_GTN,                0,   0,909,258
gauge01=GAUGE_AUTOPILOT_SAAB340!Gauge_DISPLAY_CONTROL_PANEL_GTN,            0, 258,909,294
gauge02=GAUGE_AUTOPILOT_SAAB340!Gauge_COURSE_HEADING_PANEL,            0, 552,909,201
gauge03=GAUGE_AUTOPILOT_SAAB340!Gauge_AUTOPILOT_CONTROL_PANEL_GTN,        0, 753,909,304
gauge04=GAUGE_AUTOPILOT_SAAB340!Gauge_CONTROL_PANEL_WX,                0,1057,909,276
gauge05=GAUGE_AUTOPILOT_SAAB340!Gauge_ALT_ALERT,                           0,1333,512, 222

gauge06=CARSF34!Toggle10030,  10,10,909,32


draw_order00=gauge02, gauge03

// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
//--------------------------------------------------------
[Window02]
Background_color=0,0,0 
size_mm=581,232
position=0
visible=0
ident=796

window_size= 0.303, 0.215
window_pos = 0.010, 0.165
zorder=5

gauge00=CARSF34!Control_windowsgtn,  0,0,581,232

// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window03]
Background_color=4,4,4
size_mm=468,266
window_size_ratio=1.000  
position=0
visible=0
ident=10150

window_size= 0.247, 0.250
window_pos=  0.010, 0.020


gauge00=CARSF34!WindowManager,   0,  0, 468,266

// windowssizeX = (window_sizeY * size_mmX / size_mmY) * 9 / 16
//--------------------------------------------------------
[Window04]
Background_color=0,0,0 
size_mm=700,700

window_size= 0.365, .648

position=6
visible=0
nomenu=1
ident=10060

gauge00=CARSF34!StartWindowsAircraft,   0,  0, 700,700


//--------------------------------------------------------
[Window05]
Background_color=0,0,0 
size_mm=526,426

window_size= 0.274, .394

position=4
visible=0
nomenu=1
ident=10050

gauge00=CARSF34!StartWindows,   0,  0, 526,426

[Window08]
Background_color=0,0,0
size_mm=937,887
ident=14401
window_pos= 0.660, 0.160
window_size= 0.340, 0.580
zorder=99
gauge00=rxpGTN!GTN_750_1, 0, 0,937,887
gauge01=CARF50!ToggleGTN750,             100,0,737,50


//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_1


gauge00=;PROLINE21_SF34!Proline_Config,  0,0,10,10
gauge01=PROLINE21_SF34!Proline_Common_Update,  0,0,10,10
gauge02=;PROLINE21_SF34!Proline_C_Patch,  0,0,10,10


gauge03=GAUGEEADISF34!Gauge_EFIS550_EADI,     0,  0,571,480
gauge04=GAUGEHSISF34!Gauge_EFIS84_EHSI_GTN,        0,481,571,480

gauge05=CARSF34!ToggleCARG500,              0,  0,571,480


//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_2

gauge00=GAUGE_SAAB340!Gauge_Anum,                 0,  0,894,891
gauge01=GAUGE_SAAB340!Gauge_TEMP1_DIG,           0,  876,255, 56
gauge02=GAUGE_SAAB340!Gauge_TEMP2_DIG,           259,  876,255, 56
gauge03=GAUGE_SAAB340!Gauge_CABIN_DIFF_DIG,     0,  939,131, 64
gauge04=GAUGE_SAAB340!Gauge_TOTAL_FUEL_USED_DIG,     520,  874,264, 114
gauge05=GAUGE_SAAB340!Gauge_BAT_FUEL_TEMP_PANEL,     133,  939,61, 29

//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_3

gauge00=;FMCSF34!FMC_configF50,  0,0,1,1
gauge01=;FMCSF34!FMC_UN1VC,  0,297,512, 404


gauge02=CarSound_SF34!CarSound,  0,0,5,5
gauge03=CarSound_SF34CALL!CarSound,                       2,2,5,5

//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_4

auge00=;GAUGEC2!Radio_CTL32_DME,                 719,768, 279,128
gauge01=;GAUGEC2!Radio_CTL32_DME2,                 719,896, 279,128
gauge02=GAUDE_SF340_RADIOS!Radio_CTL22_COM1,                0  , 0  , 214, 228
gauge03=GAUDE_SF340_RADIOS!Radio_CTL22_COM2,                0  , 230, 214, 228
gauge04=GAUDE_SF340_RADIOS!Radio_CTL32_NAV1,                  220, 0  , 214, 228
gauge05=GAUDE_SF340_RADIOS!Radio_CTL32_NAV2,                  230, 230, 214, 228
gauge06=GAUDE_SF340_RADIOS!Radio_CTL62_ADF,                 440, 0  , 214, 228
gauge07=GAUDE_SF340_RADIOS!Radio_CTL92_ATC,                 440, 230, 214, 228
gauge08=GAUDE_SF340_RADIOS!Radio_CTL92_ATC,                 660, 0  , 214, 228
gauge09=;GAUDE_SF340_RADIOS!Radio_CTL92_ATC,                 660, 230, 214, 228

gauge10=GAUGE_SAAB340!Gauge_UPDATE_SF34_DIG_GTN,                   0,  0,1 , 1
gauge11=GAUGE_SAAB340!Gauge_Anum_MASTER_WARNING,            2,  0,215 , 188
gauge12=GAUGE_SAAB340!Gauge_Anum_MASTER_CAUTION,          216,  0,215 , 188
gauge13=CarSound_SF34B!CarSound,  0,0,5,5
gauge14=SF34EFIS!EFIS_WX,  0,0,5,5


//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_5

gauge00=GAUGE_AUTOPILOT_SAAB340!Gauge_MODE_SELECT_PANEL_GTN,                0,   0,512,145
gauge01=GAUGE_AUTOPILOT_SAAB340!Gauge_DISPLAY_CONTROL_PANEL_GTN,            0, 147,512,166
gauge02=GAUGE_AUTOPILOT_SAAB340!Gauge_CONTROL_PANEL_WX,                0, 316,512,155
gauge03=GAUGE_AUTOPILOT_SAAB340!Gauge_AUTOPILOT_CONTROL_PANEL_GTN,        0, 473,512,171


//--------------------------------------------------------
[Vcockpit06]
Background_color=0,0,0 
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$Panel_6

gauge00=rxpGTN!GTN_750_1, 0, 0,667,794,NO_BEZEL



Day=255,255,255
Night=223,255,255
Luminous=246,115,119

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

 

 

Hi.

 

May I ask what modifications this achieves.... ? I am considering the SAB as a purchase.

 

Thnx

Share this post


Link to post
Share on other sites

Modifications for FSX for use of a side-by-side pair of Reality XP GTN 750s in the Real Air Turbine Duke v2. 

This is a three or four step process to accomplish all that is needed.  The first step is to edit in what is necessary in the panel.cfg file for the TDv2 (Turbine Duke v2).  You will need a [Window##] section for each of the two RXP 750s.  You will also need to edit the two gauges into the [VCockpit01] section of panel.cfg.  If you used F1 GTN gauges previously, then eliminate those and use these instead.

In my panel.cfg file (below) please note that you may wish to use different [window##] sections than I did, and you may need to learn how to edit the popup locations.  When I have two GPS gauges of any kind in a panel I always map them to the same key combinations and the same screen positions.  So what I have done may or may not meet your tastes.

Edits to the RealityXP.GTN.ini file in the model's main folder are needed to provide for the NO_BEZEL  installations you will take note of in the panel.cfg file.  These allow the Reality XP GTN display screens to show in the bezels that Real Air provided for F1 GTN gauges.  The edits I provide below also provide right mouse click actions to control pop ups. Right click on each to pop them up, and again to close them.

Finally, to gain full control of the tuning knobs and the two keys on the bezels (the Home key and the D-> key) you must create a subfolder to the Turbine Dukle's panel folder.  That subfolder should be named rxpGTN.  Then you must create a small .xml file named f1vc.xml and place it in that folder.  My panel.cfg edits point to that folder and file as an additional gauge.  See gauge19 in the Vcockpit01 section.

Spoiler

For panel.cfg

// Panel Configuration file
// RealAir Simulations Beechcraft Turbine Duke V2 2014 Update
// Panel and Gauge Programming by Sean Moloney
// Copyright (c) 2014 RealAir Simulations

//NOTE: File edited 12/7/2017 by fppilot
//added 2nd Reality XP GTN 750
//added f1vc.xml gauge to allow Reality XP GTN's
//to work with the original bezels intended for the F1 GTN.

// ===============================================================================
// IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN
// BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY
// EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY
// VALUE FROM 'Window03' TO 'Window 09'.
// NOTE: which has beeen done by fppilot
// ===============================================================================
[Window Titles]
Window00=Main Panel
Window01=
Window02=
Window03=
Window04=
Window05=Reality XP Garmin GTN 750 2
Window06=
Window07=Reality XP Garmin GTN 750 1
Window08=

[Window00]
file=2D_Help.bmp
size_mm=1024, 95
position=6
BACKGROUND_COLOR=0,0,0
visible=1
ident=MAIN_PANEL

[Window05]
Background_color=0,0,0
size_mm=937,887
ident=14531
window_pos= 0.7705, 0.6085
window_size=0.2295, 0.3915
zorder=99
gauge00=rxpGTN!GTN_750_2,  0,0,937,887, UNPOP_RXP2

[Window07]
Background_color=0,0,0
size_mm=937,887
ident=15531
window_pos= 0.760, 0.6085
window_size=0.2295, 0.3915
zorder=99
gauge00=rxpGTN!GTN_750_1,  0,0,937,887, UNPOP_RXP

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$RAS_Duke_CFG
background_color=1,1,1

gauge01=Config!Options, 1020, 1023, 1, 1
gauge02=Config!RealView, 1021, 1023, 1, 1
gauge03=Config!RadioLayout, 1027, 1023, 1, 1

gauge04=RASDuke!InitVars, 1022, 1023, 1, 1
gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1
gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1
gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1

gauge08=RASDuke!NavCom1, 1, 2, 509, 61
gauge09=RASDuke!NavCom2, 1, 64, 509, 61
gauge10=RASDuke!ADF, 4, 127, 332, 49
gauge11=RASDuke!Xpndr, 7, 243, 305, 57
gauge12=RASDuke!Autopilot, 5, 177, 292, 62
gauge13=RASDuke!DME, 4, 305, 256, 46
gauge14=RASDuke!KA285_Annun, 512,2,337,108
gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245
gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259
gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86
gauge18=RASDuke!Master_Warn, 893, 1, 130, 129

// ===============================================================================
// IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN
// BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE
// IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY
// CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22'
// ===============================================================================

gauge19=rxpGTN!f1vc
gauge20=rxpGTN!GTN_750_1,  2,563,390,460, POP_NO_BEZEL
gauge21=rxpGTN!GTN_750_2, 398,563,390,460, POP_NO_BEZEL2

gauge22=RASDuke!Blank, 0, 0, 1, 1
gauge23=RASDukeTv2_Sound!Sound, 1,1,2,2,./SimObjects/Airplanes/RealAir Duke Turbine V2/Panel/Sound/RASDukeTv2_Sound.ini
gauge24=RASDuke!Sound_Manager, 1,1,3,3
gauge25=RASDuke!Pressurisation, 1024, 1023, 1, 1


Day=255,255,255
Night=225,117,89
Luminous=200,200,101

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

============================================
For the RealityXP.GTN.ini file
Add the following sections to the end of the file
(note that if you do your own hand edits, the separate ident= values in the panel.cfg file for each gauge must match the popright= values in the RealityXP.GTN.ini file).

[GTN_750_1.POP_NO_BEZEL]
nobezel = true
popright = 15531
brightness.screen = -38

[GTN_750_1.UNPOP_RXP]
popright = 15531

[GTN_750_2.POP_NO_BEZEL2]
nobezel = true
popright = 14531
brightness.screen = -38

[GTN_750_2.UNPOP_RXP2]
popright = 14531

-------------------------------------------------------------------

the f1vc.xml file:

This file is referenced earlier in this      Official Panel Configuration Mods topic.
It appears the link has been requested past it's
limit.  You can try cutting and pasting the
contents below into an editor, then saving it
with the filename "f1vc.xml".  I recommend
using Windows Wordpad instead of Notepad as
I believe Wordpad will retain the formatting
or nesting in the file.

Copy just the text, starting
below my line break. The line you can see
containing the values 0 0 8 0 should be on line 17
of the file you create.

Create a subfolder named "rxpGTN" to the panel folder and place
the file in that folder.

---------------------------------------------------------------
<Gauge Name="f1vc" Version="2.04">

 


 

<!-- Reality XP GTN Buttons Bridge -->

<!-- Bridges Reality XP GTN 750/650 Touch with f1 3D bezel -->

<!-- Credits: Reality XP, Sean Moloney and Ryan Butterworth -->

 

 

<Element>

  <Select>

    <Value>

           (L:F1GTNMOUSE,bool) 0 !=

           if{

                (L:F1GTNMOUSE,bool) 0x0001FA01 - sp0

                l0 28 / int sp1 l0 28 % sp0

                <!-- map F1 model to RXP GTN unit -->

                <!-- use: 8 0 8 0 for 652=unit2, 651=unit1, 752=unit2, 751=unit1 -->

                <!-- use: 0 0 8 0 for 652=unit2, 651=unit2, 752=unit1, 751=unit1 -->

      0 0 8 0   4 l1 case 4 2 l0 1 &amp; ? + sp1

                l0 0 == l0 1 == or if{ l1 (>K:GPS_MENU_BUTTON) }

                l0 2 == l0 3 == or if{ l1 (>K:GPS_DIRECTTO_BUTTON) }                 

                l0 4 == l0 10 == or if{ l1 8 &amp; (>K:GPS_BUTTON2) }

                l0 6 == l0 11 == or if{ l1 8 &amp; (>K:GPS_BUTTON3) }

                l0 8 == l0 9 == or if{ l1 (>K:GPS_BUTTON1) }

                l0 12 == l0 18 == or if{ l1 8 &amp; (>K:GPS_GROUP_KNOB_INC) }

                l0 14 == l0 19 == or if{ l1 8 &amp; (>K:GPS_GROUP_KNOB_DEC) }

                l0 20 == l0 26 == or if{ l1 8 &amp; (>K:GPS_PAGE_KNOB_INC) }

                l0 22 == l0 27 == or if{ l1 8 &amp; (>K:GPS_PAGE_KNOB_DEC) }

                l0 24 == l0 25 == or if{ l1 (>K:GPS_CURSOR_BUTTON) }

                l0 16 == l0 17 == or if{ l1 (>K:GPS_CURSOR_BUTTON) }

                0 (>L:F1GTNMOUSE,bool)              

           }          

    </Value>     

  </Select>

</Element>

</Gauge>

 

 

Edited by RXP
  • Upvote 2

Share this post


Link to post
Share on other sites

Oh! An important addition to my TDv2 post above.  For the f1vc.xml gauge to work to provide you with working GTN keys and tuning knobs, you may also need to go into the GTN settings panel (shift + right-click on the GTN top border), scroll down to advanced options, and select the setting to "Use Simulator GPS Commands". 

And always remember, the options selected in that settings panel are unique to each aircraft model as well as unique to each instance of the GTN gauge.  So if you are using both GTN 750s, 750_1 and 750_2, you need to make that selection in each.  Settings in that panel need to be made for each aircraft model you use as well.

Edited by fppilot
  • Upvote 1

Share this post


Link to post
Share on other sites

    I have to tell you folks that all of these posts are invaluable.  Once I switched over to the RXP GTN's (I recently purchased the 650.)  the input from Jean-Luc, Bill and Frank and others have actually made installing these GTN's a lot of fun for me.  😉  The RXP units just operate and feel better then the competition.  I was only aware of the RXP 430/530's until Frank put me on to the GTN's.  Being able to deselect the audio panel and transponder functions where they aren't needed is a great bonus too. 

    I hadn't flown my Learjet 25 for a while and now it has the 650 and 750 installed and its ready to go.  🙂

Thanks folks!

Bill

  • Like 2
  • Upvote 1

Share this post


Link to post
Share on other sites
On 11/14/2017 at 8:26 PM, ryanbatcund said:

I've now got a small mod that allows minimal VC button functionality for some addons.  This mod adds click functionality for the DirectTo and HOME single button press in the virtual cockpit on the GTN bezel.  Some users have reported the frequency knobs in the lower right work too.  I don't use those however.

Mod has been tested in Carenado Cheyenne III, PA31T, C550, PC12, the Alabeo Ovation and Saratoga TC.  A2A Comanche, Cherokee, C182 (I'll probably do a mod for the 650 for the Connie).  And Realair Legacy v2.  This is only for the single GTN 750.

Hi Ryan,

Could you re-share your solution for getting the DirectTo and HOME buttons to work?  The dropbox link shows a "Too many requests" message.  This is for the A2A Comanche using BillS511's files for the 750 integration.

Thanks!

Greg

Share this post


Link to post
Share on other sites
15 hours ago, gregda said:

Hi Ryan,

Could you re-share your solution for getting the DirectTo and HOME buttons to work?  The dropbox link shows a "Too many requests" message.  This is for the A2A Comanche using BillS511's files for the 750 integration.

Thanks!

Greg

Hi Greg,

This will work with any aircraft. Download this zip file: https://www.dropbox.com/s/8egnuc87fesggcb/rxpGTN.zip?dl=0 The download button is at upper right corner of page. It contains a folder rxpGTN inside that folder is a file f1vc.xml. Extract the folder into the panel folder. Open the panel.cfg file and add the following line below the RXP gauge; gauge01=rxpGTN!f1vc,0,0,1,1 to the appropriate VCockpit section.

Looks look this.

[VCockpit03]
size_mm=1024,1024
pixel_size=1024,1024
texture=$GTN750
background_color=0,0,0

gauge00=rxpGTN!GTN_750_1, 0,0,677,794,NO_BEZEL
gauge01=!f1vc,0,0,1,1

Lastly:
Flight Simulator GPS commands
The GTN may be configured to intercept all of the default FS GPS commands.
Open the settings panel then select "Use Default GPS Commands" advanced
gauge option.

Myself and others have to double click on the bezel buttons. A single click works for others. No one is sure why.

[added by fppilot]

Bill,
Per "works in any aircraft", please recall Line 17 of the f1vc.xml file contains a 4 digit code that varies based on what GTN gauges are in use in that aircraft. So if using a 650 instead of a 750, or using say 750_2 instead of 750_1 requires adjusting that code.

  • Upvote 2

Share this post


Link to post
Share on other sites
Posted (edited)

GTN 750 and Carenado F50

this works for me , run f1 gtn 750F50 then copy this to panel

//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0 
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$Panel_5

gauge00=rxpGTN!GTN_750_1,0,0,667,794,NO_BEZEL



Day=255,255,255
Night=223,255,255
Luminous=246,115,119

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

 

and this to RealityXP.GTN config

[GTN_750_1.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; enable touch beyond screen bounds if true (2D only), clip if false (GTN native).
extendtouch = true
; auto-resize dimension (width,height)
refsize = 
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225) (requires SHIFT+left mouse button).
popleft = 
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =15751 
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

[GTN_750_1.NO_BEZEL]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; enable touch beyond screen bounds if true (2D only), clip if false (GTN native).
extendtouch = true
; auto-resize dimension (width,height)
refsize = 
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225) (requires SHIFT+left mouse button).
popleft = 
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright =15751 
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0
 

 

Edited by RXP
  • Like 1

Share this post


Link to post
Share on other sites

GTN 750 integrated into Carenado E50P Phenom 100

Here is the panel.cfg that integrates the RXP GTN 750 into the Carenado Phenom 100 VC & pop up.. See credits to others in comments at top of panel.cfg.

This puts the GTN display on the MFD and keeps the engine etc data panel fully operational. The very top row of the GTN radio bar is not visible but there are click spots to swap Com 1 active / stby and call up the audio panel, etc. The click spot to pop up the G1000 MFD (which is fully functional to provide access to systems and checklists etc) is at the bottom of the VC MFD.  There are numerous files required for gauges and synching CDI from the GTN to the G1000.  AP etc all works perfectly in as much testing as I have done so far.

If anyone wants to implement, send me a PM and I can provide all the require files.

Bruce

EDIT:. I forgot to mention what I think is the best part of the mod: the G1000 MENU button and the DIRECT TO button in the VC have been reprogrammed to call up the RXP GTN HOME screen and DIRECT TO screens since those buttons are only visible in the pop up with bezel. 

Spoiler

//  Phenom 100 RXP GTN 750 panel
//  Panel cfg adapted by B. Buckley from work done by Bert Peike, Jiri Kocman & Jorge Rexach
//


[Window Titles]
Window00=PFD Panel
Window01=MFD Panel
Window02=RealityXP Garmin GTN 750
Window03=Garmin Autopilot
Window04=GFD Mode Controller
Window05=EFIS
Window06=ENGINE SETUP

[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000


//--------------------------------------------------------
[Window00]
Background_color=0,0,0 
size_mm=1400,969
window_size_ratio=1.000  
position=6
visible=0
ident=MAIN_PANEL
window_size= 0.330,0.400  //0.370, 0.600
//window_pos= 0.000, 0.400
no_luminous=1

gauge00=EMB500_G1000!G1000_configEMBP100,  0,0,5,5
gauge01=EMB500_G1000!G1000_PFDEMBP100,  0,0,1400,969
gauge02=EMB500CAR!ToggleCARG1000,  180,0,1000,64
gauge03=Synch_GPS_NAV!Synch_GPS_NAV,    0,0,1,1
///  xml gauge to synch G1000 CDI source to GTN selected source


//--------------------------------------------------------
[Window01]
Background_color=0,0,0 
size_mm=1400,969
window_size_ratio=1.000  
position=8
visible=0
ident=10010
window_size=0.330,0.400  //0.370, 0.600
//window_pos= 0.370, 0.400
no_luminous=1

gauge00=EMB500_G1000!G1000_configEMBP100,  0,0,1,1
gauge01=EMB500_G1000!G1000_MFDEMBP100,  0,0,1400,969
gauge02=EMB500CAR!ToggleCARG1100,  300,0,800,30


//--------------------------------------------------------
[Window02]
Background_color=0,0,0 
size_mm=937,887
window_size_ratio=1.000  
position=2
visible=1
ident=14401
window_size=0.255,0.390
//window_pos= 0.740, 0.400
zorder=99

gauge00=rxpGTN!GTN_750_1, 0, 0,937,887


//--------------------------------------------------------
[Window03]
Background_color=0,0,0 
size_mm=600,148
window_size_ratio=1.000  
position=2
visible=0
ident=10040
window_size= 0.260, 0.150
window_pos= 0.740, 0.250

gauge00=EMB500CAR!Toggle10030,  0,0,24,51
gauge01=EMB500_GAUGE!AUTOPILOT_GARMIN,  0,0,600,148


//--------------------------------------------------------
[Window04]
Background_color=0,0,0 
size_mm=550,417
window_size_ratio=1.000  
position=0
visible=0
ident=380
window_size= 0.260, 0.520
window_pos= 0.740, 0.400

gauge00=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_2DEMB100,  0,0,550,417
gauge01=EMB500CAR!ToggleCAR380,  188,0,200,10


//--------------------------------------------------------
[Window05]
Background_color=0,0,0 
size_mm=512,520
window_size_ratio=1.000  
position=6
visible=0
ident=10070
window_size= 0.140, 0.360
window_pos= 0.430, 0.050
no_luminous=1

gauge00=EFISEMB500!EFIS,  0,0,512,520


//--------------------------------------------------------
[Window06]
Background_color=0,0,0
size_mm=500,1400
window_size_ratio=1.000  
position=3
visible=1
ident=10060
nomenu=1
window_size= 0.200, 0.520
window_pos= 0.400, 0.035
zorder=5

gauge00=GAUGEEMB500!StartWindowsAircraft,  0,0,500,900
gauge01=EMB500CAR!Control_windows,  0,900,500,500


//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_1

gauge00=EMB500_G1000!G1000_configEMBP100,  0,0,1,1
gauge01=GAUGEEMB500!Gauge_CLOCK_DIG,  0,0,1,1
gauge02=EMB500_G1000!G1000_PFDEMBP100VC,  1,4,512,350
gauge03=EMB500CAR!ToggleCARG1000,  64,0,380,32
gauge04=EMB500_G1000!COMMON_UPDATE_G1000PFD,    0,  0,   1,  1
gauge05=Synch_GPS_NAV!Synch_GPS_NAV,            0,  0,   1,      1
///  xml gauge to synch G1000 CDI source to GTN selected source


//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_2

gauge00=EMB500_G1000!G1000_configEMBP100,      0,0,1,1
gauge01=EMB500CAR!ToggleCARG1100,          72,318,368,12
gauge02=CAREMB500_G1000!GPS_Twas,          0,0,1,1
gauge03=EMB500_G1000!G1000_GTNMFDEMBP100,      0,1,172,357
gauge04=rxpGTN!GTN_750_1, 172,4,272,312,NO_BEZEL
gauge05=EMB500CAR!ToggleCOM_SWAP,              457,47,25,16
gauge06=EMB500CAR!GTN_RXP_DIRECTTO,          457,238,25,16
gauge07=EMB500CAR!GTN_RXP_HOME,              487,238,25,16
gauge08=EMB500_G1000!COMMON_UPDATE_G1000MFD,    0,  0,   1,  1


//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_3

gauge00=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_2DEMB100VC,  0,0,372,283
gauge01=EMB500_G1000!G1000_Audio,  437,0,75,423
gauge02=EMB500_GAUGE!AUTOPILOT_EMB100,  0,403,435,109
gauge03=CarSound_EMB500!CarSound,  2,2,5,5
gauge04=EMB500_Cabin_alt!C340_PRESS,  0,0,1,1
gauge05=EMB500CAR!Toggle10030,  0,0,373,5
gauge06=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_BTN_OUTER,  77,284,95,105
gauge07=EMB500_GAUGE!GAUGE_G1000_PEDESTAL_BTN_INNER,  178,284,95,105


//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$Panel_4

gauge00=EMB500_G1000!G1000_PFDEMBP100VC2,  1,3,384,264


//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0 
size_mm=512,512
visible=0
pixel_size=512,512
texture=$Panel_5

gauge00=EFISEMB500!EFIS_VC,  0,0,504,508



Day=255,255,255
Night=255,255,255
Luminous=201,64,64

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6143

 

Edited by bbuckley
  • Upvote 1

Share this post


Link to post
Share on other sites

Hello.

I have a question about the RXP GTN750 and 650 for the RealAir Turbine Duke v2 (Prepar3D v4.4 version).

 

Is it possible to use both 750 and 650 ? The mod is for just the 750 and I thinking to buy the 650 also.

 

Thanks

 

Philippe M

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, PhilippeMendes said:

Is it possible to use both 750 and 650 ?

Yes indeed.

Go to C:\...Turbine Duke V2 P3D4\RealAir\duketv2p3d2\AutoPlay\Files. Open Config.ini. At the top under [App] Change the line; ignoreGtnDetect= to 1. If you also have the Reality XP GNS also change ignoreRxpDetect=1.

[App]
ignoreFsWarning=1
ignoreRxpDetect=1
ignoreGtnDetect=1
p3dVersion=4

Open the Duke configurator app and select the appropriate units.

Install the GTN's in sim the usual way. Menu|Add-ons|Reality XP GTN| Setup Aircraft. Also select the No Bezel option. I use the 750 as unit 1 & 650 as unit 2.

Edited by BillS511
  • Like 1
  • Upvote 1

Share this post


Link to post
Share on other sites
Posted (edited)

Thanks a lot ! I'll do it and tell you if it's ok or not.

Philippe M

Edit:

 

It's working ! Thanks for your help BillS511, Appreciate.

Philippe Mendes

 

Edited by PhilippeMendes
  • Like 2

Share this post


Link to post
Share on other sites

Alabeo Diamond DA40

Hi I have put the RXP GTN 750 into the A2A's but I also have an Alabeo  DA40 and tried to insert the 750 via the Xp in the game method. It allow you to custom size it but I tried many different resizes and just cannot get it to line up in the window of the GNS430 that is in the DA40. I got it to work pretty decently with this for gauge00 in the panel.cfg:

[Vcockpit01]
Background_color = 0,0,0
size_mm = 512,512
visible = 0
pixel_size = 513,513
texture = $Panel_1
gauge00 = rxpGTN!GTN_750_1, 73, 32,325,165
gauge01 = CarenadoG430_3D_DA40!GNS430_nc2,  0,257,512,256
gauge02 = DA40!ToggleCARG1000,     64,0, 256, 32
gauge03 = ALSound_PA32TC!CarSound,       0, 0,  1,  1
gauge04 = ALDA40!SYS_SMOKE,    0, 0, 1, 1

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

A2A Cherokee 180 configuration for the GTN 650/750.

First backup the panel_F1_650.cfg, panel_F1_750.cfg, and RealityXP.GTN.ini files. Use the Cherokee Aircraft Configurator P3D4 as usual to change gauges.

Download via Dropbox. A2A180_RXP_GTN.zip

To adjust the screen brightness open RealityXP.GTN.ini. Go to:

[GTN_750_1.NO_BEZEL] or [GTN_650_1.NO_BEZEL]
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright = 14403
; offset brightness (-100 to +100)
brightness.screen = 0
to make dimmer set to around -50, -40 etc.

Edited by BillS511
  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now