Jump to content
Sign in to follow this  
Followers 0
RXP

Official Panel Configuration Thread

By RXP, in RXP GNS 530W/430W V2

Recommended Posts

ComSimPilot    623

ComSimPilot
Posted (edited)

GNS 530W configuration file for Digital Replica - Cessna 310L

ewWQVKM.jpg

Spoiler

[GNS]
; comma separated list of gauges
gauges = GNS_530_1

[GNS_530_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS, Garmin_530_screen
; is the master device if true.
MasterDevice = true 
; connects GPS to copilot side if true.
CopilotSide = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to Autopilot if true.
LinkOto = true 
; connects GPS to HSI if true.
LinkHsi = true 
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true 
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; connects GPS to Shadin Air Data computer if true.
UseAirData = true 
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true 
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true 
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true 
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = true 
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; cdi/obs: CDI Key
AFMS.cdi_key =  
; cdi/obs: Selected Course for GPS
AFMS.sel_crs_gps =  
; cdi/obs: Selected Course for VLOC
AFMS.sel_crs_vloc =  
; cdi/obs: V-Flag State (1: declutter
AFMS.v_flag_declutter =  
; main: GPS Selected (0: prompt, 1: auto)
AFMS.gps_selected = 1
; main: COM Presets
AFMS.com_presets =  
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GNS_530_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 840,1250,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,357,490,357
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GNS_530_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_430_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true
; connects GPS to copilot side if true.
CopilotSide = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; cdi/obs: CDI Key
AFMS.cdi_key = 
; cdi/obs: Selected Course for GPS
AFMS.sel_crs_gps = 
; cdi/obs: Selected Course for VLOC
AFMS.sel_crs_vloc = 
; cdi/obs: V-Flag State (1: declutter
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt, 1: auto)
AFMS.gps_selected = 1
; main: COM Presets
AFMS.com_presets = 
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GNS_430_1.WINDOW]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 2950,1420,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,206,490,206
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GNS_430_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_530_1.Garmin_530_screen]
visible = true
nobezel = true
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 13,729,495,365

 

Edited by Daedalus
  • Like 1
  • Upvote 1

Simulators: Prepar3D v5 Academic | X-Plane 1111.50+ | DCS  World  Open Beta | MSFS 2020 Premium Deluxe | 
PC Hardware: Dell U3417W | Intel i9 10900K | msi RTX 2080 Ti  Gaming X Trio | msi MPG Z490 Gaming Edge Wifi | G.Skill 32GB 3600Mhz CL16 | Samsung 970 EVO Plus+860 EVO+850 EVO x 1TB, Western Digital Black Caviar Black x 6 TB | Corsair RM1000i | Corsair H115i Platinum | Fractal Design Define S2 Gunmetal |
Flight Controls: Fulcrum One Yoke | Virpil VPC WarBRD Base | Virpil VPC MongoosT-50CM Grip, Thrustmaster Warthog+F/A-18C Grip | Thrustmaster TPR Rudder Pedals | Virtual Fly TQ6+Throttle Quadrant | Sismo B737 Max Gear Lever | TrackIR 5 | Monsterteck Desk Mounts |
My fleet catalog: Link                                                                                                                                                       

Share this post

Link to post
Share on other sites

ComSimPilot    623

ComSimPilot
Posted (edited)

GNS 530W configuration file for Just Flight - Piper Archer III

GemewHw.jpg

Spoiler

[GNS]
; comma separated list of gauges
gauges = GNS_530_1

[GNS_530_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS, Garmin_530_screen
; is the master device if true.
MasterDevice = true
; connects GPS to copilot side if true.
CopilotSide = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to Autopilot if true.
LinkOto = true
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course motor if true.
LinkCrs = false
; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS).
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; sets TCAD maximum number of targets to X-Plane AI Traffic Count.
UseTcadAiCount = true
; connects GPS #1 to GPS #2 if true (both required).
UseCrossFill = false
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = true
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF
PowerKnob = NONE
; sets device power source: 
; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6
PowerSource = AVIONICS_BUS
; sets fuel type: AVGAS,JETA,JETB
FuelType = AVGAS
; sets TAWS type: TERR,TAWS
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic).
CpuAffinity = -1
; cdi/obs: CDI Key
AFMS.cdi_key = 
; cdi/obs: Selected Course for GPS
AFMS.sel_crs_gps = 
; cdi/obs: Selected Course for VLOC
AFMS.sel_crs_vloc = 
; cdi/obs: V-Flag State (1: declutter
AFMS.v_flag_declutter = 
; main: GPS Selected (0: prompt, 1: auto)
AFMS.gps_selected = 1
; main: COM Presets
AFMS.com_presets = 
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GNS_530_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 2950,1412,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,357,490,357
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GNS_530_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_530_1.Garmin_530_screen]
visible = true
nobezel = true
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1264,614,520,390

 

Edited by Daedalus
  • Like 1
  • Upvote 1

Simulators: Prepar3D v5 Academic | X-Plane 1111.50+ | DCS  World  Open Beta | MSFS 2020 Premium Deluxe | 
PC Hardware: Dell U3417W | Intel i9 10900K | msi RTX 2080 Ti  Gaming X Trio | msi MPG Z490 Gaming Edge Wifi | G.Skill 32GB 3600Mhz CL16 | Samsung 970 EVO Plus+860 EVO+850 EVO x 1TB, Western Digital Black Caviar Black x 6 TB | Corsair RM1000i | Corsair H115i Platinum | Fractal Design Define S2 Gunmetal |
Flight Controls: Fulcrum One Yoke | Virpil VPC WarBRD Base | Virpil VPC MongoosT-50CM Grip, Thrustmaster Warthog+F/A-18C Grip | Thrustmaster TPR Rudder Pedals | Virtual Fly TQ6+Throttle Quadrant | Sismo B737 Max Gear Lever | TrackIR 5 | Monsterteck Desk Mounts |
My fleet catalog: Link                                                                                                                                                       

Share this post

Link to post
Share on other sites

schmoboy    4

schmoboy
Posted (edited)

Carenado PC12 Dual 530s

v95SERX.png

[GNS_530_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1492,883,516,378
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false

[GNS_530_2.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1492,483,516,378
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false

 

Edited by RXP
  • Like 1

Share this post

Link to post
Share on other sites

DRS    6

DRS
Posted

Airfoillabs C172 - GNS 430 Panel Config

My first attempt at doing one myself as I couldn't find one for this model. Puts the GNS 430 screen in the 3D cockpit on the AFL 430 screen. I also enabled 'Use simulator GPS commands" and everything is working great!

 

Spoiler

[GNS_430_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 324,616,434,236
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

  • Like 4

Share this post

Link to post
Share on other sites

ComSimPilot    623

ComSimPilot
Posted (edited)

GNS 530W + 430W configuration file for Digital Replica - Cessna 310L (Updated for version v1.12)

7Q8G2DK.jpg

sWWfG7g.jpg

Spoiler

[GNS]
; comma separated list of gauges
gauges = GNS_430_1, GNS_530_2

[GNS_530_2]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true 
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseSimGpsCmds = true 
UseCrossFill = true 
PowerSource = AVIONICS_BUS

[GNS_530_2.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 2950,1349,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,357,490,357
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_530_2.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1024,2043,520,378
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_430_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS, PANELS
; is the master device if true.
MasterDevice = false
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseSimGpsCmds = true
UseCrossFill = true
PowerSource = AVIONICS_BUS

[GNS_430_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1525,1096,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,206,490,206
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_430_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 594,2043,430,228
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

Edited by RXP
  • Like 3

Simulators: Prepar3D v5 Academic | X-Plane 1111.50+ | DCS  World  Open Beta | MSFS 2020 Premium Deluxe | 
PC Hardware: Dell U3417W | Intel i9 10900K | msi RTX 2080 Ti  Gaming X Trio | msi MPG Z490 Gaming Edge Wifi | G.Skill 32GB 3600Mhz CL16 | Samsung 970 EVO Plus+860 EVO+850 EVO x 1TB, Western Digital Black Caviar Black x 6 TB | Corsair RM1000i | Corsair H115i Platinum | Fractal Design Define S2 Gunmetal |
Flight Controls: Fulcrum One Yoke | Virpil VPC WarBRD Base | Virpil VPC MongoosT-50CM Grip, Thrustmaster Warthog+F/A-18C Grip | Thrustmaster TPR Rudder Pedals | Virtual Fly TQ6+Throttle Quadrant | Sismo B737 Max Gear Lever | TrackIR 5 | Monsterteck Desk Mounts |
My fleet catalog: Link                                                                                                                                                       

Share this post

Link to post
Share on other sites

MAGM2000    2

MAGM2000
Posted (edited)

VSKYLABS Guimbal Cabri G2 - RXP GNS 430

Tested in VR

Image:
https://drive.google.com/open?id=1DjKeJOr4OibPwOx9mmDqhxTximiZwWT4

RealityXP.GNS.ini File:

 

 

[GNS]
; VSKYLABS GUIMBAL Cabri G2 (Hecho por mi)
; comma separated list of gauges
gauges = GNS_430_1

[GNS_430_1]
; 1. LogTrainer = 0 | 1 Enable Garming Trainer lgs
LogTrainer = 1
; comma separated list of render targets.
drawto = WINDOW, Garmin_430_screen
; is the master device if true.
MasterDevice = true
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseSimGpsCmds = true
AutoSavePln = true
LinkSimGps = true
LinkHsi = false
LinkOto = false
AutoNavGps = false
PowerSource = ALWAYS_ON
PowerKnob = DEFAULT_ON
FuelType = AVGAS
RyanTcadVolume = 95
NoAudioFocus = true

[GNS_430_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 2560,1552,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = true 
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; enable popup window if true (screen clickspot)
usepopup = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,206,490,206
; display as popout window if true (requires XP11.1).
undocked = false
; auto hide in external view if true.
autohide = false
; freeze display position if true.
locked = false

[GNS_430_1.Garmin_430_screen]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1608,687,430,240
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_430_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true


 

Edited by RXP
  • Like 1

Share this post

Link to post
Share on other sites

Syonco    13

Syonco
Posted
On 8/27/2019 at 8:08 PM, DRS said:

Airfoillabs C172 - GNS 430 Panel Config

My first attempt at doing one myself as I couldn't find one for this model. Puts the GNS 430 screen in the 3D cockpit on the AFL 430 screen. I also enabled 'Use simulator GPS commands" and everything is working great!

 

  Hide contents

[GNS_430_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 324,616,434,236
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

With this i'm seeing the default XP 430, and not the RXP one installed. Guess i did something wrong? Or are you using the RXP as a pop-out window?

Share this post

Link to post
Share on other sites

ComSimPilot    623

ComSimPilot
Posted

GNS 530W + GNS 430W configuration file for Digital Replica - RV-10

9HmgCrG.jpg
 

Spoiler

[GNS]
; comma separated list of gauges
gauges = GNS_430_2, GNS_530_1

[GNS_530_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseCrossFill = true
UseSimGpsCmds = true
PowerSource = AVIONICS_BUS

[GNS_530_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1752,1353,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,357,490,357
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_530_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1024,2043,520,380
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_430_2]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = false
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseCrossFill = true
UseSimGpsCmds = true
PowerSource = AVIONICS_BUS

[GNS_430_2.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 2431,1407,980,412
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,206,490,206
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_430_2.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1025,1655,430,232
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

  • Like 2

Simulators: Prepar3D v5 Academic | X-Plane 1111.50+ | DCS  World  Open Beta | MSFS 2020 Premium Deluxe | 
PC Hardware: Dell U3417W | Intel i9 10900K | msi RTX 2080 Ti  Gaming X Trio | msi MPG Z490 Gaming Edge Wifi | G.Skill 32GB 3600Mhz CL16 | Samsung 970 EVO Plus+860 EVO+850 EVO x 1TB, Western Digital Black Caviar Black x 6 TB | Corsair RM1000i | Corsair H115i Platinum | Fractal Design Define S2 Gunmetal |
Flight Controls: Fulcrum One Yoke | Virpil VPC WarBRD Base | Virpil VPC MongoosT-50CM Grip, Thrustmaster Warthog+F/A-18C Grip | Thrustmaster TPR Rudder Pedals | Virtual Fly TQ6+Throttle Quadrant | Sismo B737 Max Gear Lever | TrackIR 5 | Monsterteck Desk Mounts |
My fleet catalog: Link                                                                                                                                                       

Share this post

Link to post
Share on other sites

friese10    4

friese10
Posted (edited)

Double GNS 530 for STMA Pilatus PC12-47G.

This page is a great idea, will really save others lots of time!

Spoiler

 

[GNS]
; comma separated list of gauges
gauges = GNS_530_1,GNS_530_2

[GNS_530_1]

; comma separated list of render targets.
drawto = WINDOW, Garmin_530_screen
; is the master device if true.
MasterDevice = true
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseSimGpsCmds = true

[GNS_530_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 3875,826,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,357,490,357
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_530_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_530_1.Garmin_530_screen]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 138,973,531,401
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_530_2]
; comma separated list of render targets.
drawto = WINDOW, Garmin_530_screen
; is the master device if true.
MasterDevice = false
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice =
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseSimGpsCmds = true
UseCrossFill = true

[GNS_530_2.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 3875,826,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,357,490,357
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_530_2.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GNS_530_2.Garmin_530_screen]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 957,973,541,401
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

 

Edited by RXP
  • Like 1

Share this post

Link to post
Share on other sites

PontiusPilot    0

PontiusPilot
Posted
On 8/27/2019 at 7:08 PM, DRS said:

Airfoillabs C172 - GNS 430 Panel Config

My first attempt at doing one myself as I couldn't find one for this model. Puts the GNS 430 screen in the 3D cockpit on the AFL 430 screen. I also enabled 'Use simulator GPS commands" and everything is working great!

 

  Hide contents

[GNS_430_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 324,616,434,236
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

Thanks for this!

Share this post

Link to post
Share on other sites

ecuflyer    13

ecuflyer
Posted (edited)

GNS 430 on Carenado Cessna C337H Super Skymaster…

a old one, but one of my favorites and still works well in Xplane 11.4

HEQrpcZTdeaohYwFQxWf8Y9tpKi8ri66DMCmg2hT

[GNS_430_1.PANELS]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 494,680,428,236
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

Edited by ecuflyer
  • Like 1
Cristian Caicedo

Share this post

Link to post
Share on other sites

ecuflyer    13

ecuflyer
Posted (edited)

GNS 430 on Carenado Beechcraft Bonanza V35B.

Another old one that I like a lot and again still works well in Xplane 11.4

2NKpxbeQ4uDMAtBTqmpBpblrFLlcvSbw2Xeft8eu

[GNS_430_1.PANELS]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 235,590,430,232
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

Edited by ecuflyer
  • Like 1
Cristian Caicedo

Share this post

Link to post
Share on other sites

cassior15    1

cassior15
Posted (edited)

GNS 430 on Dreamfoil AS350.

Spoiler 



[GNS]
; comma separated list of gauges
gauges = GNS_430_1

[GNS_430_1]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = true
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1

[GNS_430_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1265,1024,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,103,245,103
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_430_1.PANELS]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 81,1388,195,121
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

 

 

Edited by RXP
  • Like 1

Share this post

Link to post
Share on other sites

stavka    9

stavka
Posted (edited)

GNS 430 on An-24RV (Oleg Tronov version)

Spoiler

[GNS]
; comma separated list of gauges
gauges = GNS_430_1

[GNS_430_1]
; comma separated list of render targets.
drawto = WINDOW, AN24
; is the master device if true.
MasterDevice = true 
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseSimGpsCmds = true 

[GNS_430_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1351,1019,490,206
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,103,245,103
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_430_1.AN24]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 913,175,296,162
; left mouse button on the screen toggles popup window if true.
popleft = true 
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 

[GNS_430_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

 

Edited by RXP
  • Like 1

Share this post

Link to post
Share on other sites

stavka    9

stavka
Posted (edited)

After I completed my collection of RXP addons for XP11 😉 (I bought the ones that i not yet had), now i'm here to post another aircraft not covered in this thread:

LES Saab 340

Spoiler

[GNS]
; comma separated list of gauges
gauges = GNS_530_1

[GNS_530_1]
; comma separated list of render targets.
drawto = WINDOW, 530
; is the master device if true.
MasterDevice = true 
; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430)
; no value connects to first found, 'OFF' disables connection.
HardwareDevice = 
; hardware selector number or -1 to disable.
HardwareIdx = -1
UseSimGpsCmds = true 

[GNS_530_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1430,1060,490,357
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,178.5,245,178.5
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; auto hide in external view if true.
autohide = false

[GNS_530_1.530]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 4,394,520,383
; left mouse button on the screen toggles popup window if true.
popleft = true 
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 

[GNS_530_1.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true.
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
 

 

After some tests I noticed that it only works if i close RXP GNS and open again when after aircraft startup. Maybe some weird feature from this specific addon were RXP not enabled right away when load aircraft and only works after his default GPS is started.

After turn on GPS, i need to close RXP plugin, click ENT, then open RXP again and after all fine 🙂

Edited by stavka

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...