RealAir Customer Support *Please Read*

[howevr 39]

Great. Thank you Sean.

[DrumsArt 270]

Thank you very much !

Regards,

[Jean-Paul 167]

Thank you so much Sean !

 

[antonvs 76]

Sean, I want to join in with all the others and thank you for your continued support for the Legacy (unfortunately I was too late in deciding to buy the Duke). The Legacy v2 (with GTN's) is by far my most used and enjoyed plane in P3Dv4. Not only is it a joy to fly, its so versatile, from low and (not so) slow short hops to full IFR trips of 1000nm. Did one of these yesterday from Barrow-in-Furness (EGNL) to Narvik (ENNK) - 1059nm at FL230 on one tank with 9.3Gal to spare.

Here's a link to screenshots of that flight:
https://www.dropbox.com/sh/l87836kv5az2ku2/AAD4MVtRT1IxUa5KJx3ccx5ra?dl=0

Today I have been hovering around the Stuff4FS airports of British Columbia. Just utter bliss.

I do have a open question. I only just noticed that the RealAir Config Panel tool is not showing up anywhere on my PC. I wonder if this was not included in the P3Dv4 installer. Someone might like to enlighten me.

Edited May 4, 2018 by antonvs

[Christopher Low 5,353]

I am still sad that I never got the chance to purchase the P3D version of the Turbine Duke

[ryanbatc 12,850]

It had been out for sale for ages.  And it wasn't very expensive - how'd you miss it?

[onebob 125]

11 hours ago, antonvs said:

Sean, I want to join in with all the others and thank you for your continued support for the Legacy (unfortunately I was too late in deciding to buy the Duke). The Legacy v2 (with GTN's) is by far my most used and enjoyed plane in P3Dv4. Not only is it a joy to fly, its so versatile, from low and (not so) slow short hops to full IFR trips of 1000nm. Did one of these yesterday from Barrow-in-Furness (EGNL) to Narvik (ENNK) - 1059nm at FL230 on one tank with 9.3Gal to spare.

Here's a link to screenshots of that flight:
https://www.dropbox.com/sh/l87836kv5az2ku2/AAD4MVtRT1IxUa5KJx3ccx5ra?dl=0

Today I have been hovering around the Stuff4FS airports of British Columbia. Just utter bliss.

I do have a open question. I only just noticed that the RealAir Config Panel tool is not showing up anywhere on my PC. I wonder if this was not included in the P3Dv4 installer. Someone might like to enlighten me.

Installed ok for me however I did have a hick-up with my Internet Security ( Bitdender) , had to except it and rerun the installation. The config program is installed in your Add-ons folder in a folder 'RealAir'  path :- D:\Users\you\Documents\Prepar3D v4 Add-ons\Legacy V2 P3D4\RealAir\legacyv2p3d

your path may vary

bob

Edited May 4, 2018 by onebob

[antonvs 76]

@onebob Thanks Bob, I just did a reinstall and that got the config program working again for me. I used the default C:\Users\Anton\Documents\Prepar3D v4 Add-ons\Legacy V2 P3D4\RealAir\legacyv2p3d folder this time rather than than the e:\Lockheed Martin\add-on aircraft that I had tried using with the first install. Cheers.

Edited May 5, 2018 by antonvs

[Claude Troncy 4]

21 hours ago, ryanbatcund said:

It had been out for sale for ages.  And it wasn't very expensive - how'd you miss it?

I too have missed it.... Nobody is perfect. 😄.

Cheers

Claude

[jeff20 52]

i just wish to thank sean for the support for p3d v4 installers

i was lucky enough to buy legacy and duke v2 when there were for sale

feel sorry for those who did miss out on these 2 fantastic aircraft

thanks once again

[jpkaye 1]

Flight Sim heaven! Just got back to simming with a new machine capable of doing P3D v4 justice, and spent a week attempting to make the Milviz 310R my twin. Hopeless, with poor instruments, an unworkable autopilot, and just hard to fly with any pleasure.

Found this thread, and installed my old Turbine Duke with the new installer. Works 99.5% absolutely fine, and a joy to use and fly. The only oddity is a missing thousands finger on the altimeter, which I'm sure used to be there in P3Dv2.

A big thank you to Sean Moloney for caring about us. Now I'm just sorry I didn't upgrade my Legacy at the same time as the Duke!

[Bert Pieke 7,585]

3 hours ago, jpkaye said:

Flight Sim heaven! Just got back to simming with a new machine capable of doing P3D v4 justice, and spent a week attempting to make the Milviz 310R my twin. Hopeless, with poor instruments, an unworkable autopilot, and just hard to fly with any pleasure.

Found this thread, and installed my old Turbine Duke with the new installer. Works 99.5% absolutely fine, and a joy to use and fly. The only oddity is a missing thousands finger on the altimeter, which I'm sure used to be there in P3Dv2.

A big thank you to Sean Moloney for caring about us. Now I'm just sorry I didn't upgrade my Legacy at the same time as the Duke!

Rest assured... that Altimeter never had a "thousands finger" 

[tttocs 301]

On 5/13/2018 at 2:16 PM, jpkaye said:

Flight Sim heaven! Just got back to simming with a new machine capable of doing P3D v4 justice, and spent a week attempting to make the Milviz 310R my twin. Hopeless, with poor instruments, an unworkable autopilot, and just hard to fly with any pleasure.

Not sure why this ended up in a RealAir thread, but just for the sake of balance, the new 310 is now one of my three favorite GA planes, the other two being the piston and turbine Dukes - it's that good.

Glad you got your T-Duke working in V4. 🙂

Scott