Xtreme Prototype Learjet 25

[Mangouste 13]

Hello

Someone would have managed to install the XP GTN 750 in this aircraft? I tried a thousand setups and nothing to do to incorporate it.
I am using the popup while waiting for a solution. I know that F1 GTN works.

Thank You.

[RXP 2,336]

Hi, I'm not sure there is one such pre-made config posted in the 'Official Panel Configuration' thread, however, we're already in contact with XTreme Prototypes to make this an official option in their fine aircraft.

[Mangouste 13]

Hello

This is good news, thank you.

[Dean33 69]

Yes there is.  It sits behind the GPS and is accessed by clicking a button just above and to the right to access it and other alternatives. 

The details are there somewhere in the 200 page manual but I’ll post my panel.cfg here later today. 

Awesome aircraft. Cleanest VC ever. 

EDIT. sorry not in manual. I was referring to F1 unit but I think my cfg may help - later. 

 

EDIT ignore this I was wrong! See below.

[Window02]
Background_color=0,0,0
size_mm=937,887
ident=14401
zorder=99
gauge00=F1GTN!GTN750,  0,0,937,887,UNIT1.POP
window_pos= 0.660, 0.160
window_size= 0.340, 0.580
 

EDIT CFG FROM THE CREATOR - IT WORKS FOR F1 UNITS

// Xtreme Prototypes Gates Learjet Model 25 for Prepar3D and Flight Simulator X
// Version 2.1

// Panel Configuration File

// Copyright (C) 2009-2017 by Xtreme Prototypes, Inc.
// http://www.xtremeprototypes.com

// 2D COCKPIT SECTION STARTS HERE //////////////////////////

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

Day=255,255,255
Night=140,140,140
Luminous=180,180,180

[Window Titles]
Window00=2D Cockpit
Window01=GPS
Window02=Flight1 Garmin GTN750 U1
Window03=Flight1 GTN Stack
Window04=Flight1 Garmin GTN650 U1

// This addon has no main 2D panel (do not edit) -----------

[Window00]
background_color=0,0,0
size_mm=1024,768
window_size_ratio=1.000
position=0
visible=1
ident=MAIN_PANEL
window_size=1.000,1.000
window_pos=0.000,0.000
view_window_rect=8192,6144
nomenu=1

// Default FSX Garmin 500 GPS 2D panel -----------

[Window01]
Background_color=0,0,0
size_mm=456,378
position=5
visible=0
always_visible=0
ident=GPS_PANEL
window_size=0.400,0.550
window_pos=0.580,0.420
sizeable=1
gauge00=fs9gps!gps_500,0,0

[Window02]
Background_color=0,0,0
size_mm=937,887
ident=14401
zorder=99
gauge00=F1GTN!GTN750,  0,0,937,887,UNIT1.POP
window_pos= 0.660, 0.160
window_size= 0.340, 0.580

[Window03]
size_mm=255,870
Position= 0
window_size= 0.058, 0.243
visible=1
ident=14400
zorder=100
gauge00=F1GTN!GTNStack,  0,0,255,1039
[Window04]
Background_color=0,0,0
size_mm=937,390
ident=14403
gauge00=F1GTN!GTN650,  0,0,937,390,UNIT1.POP
window_pos= 0.660, 0.740
window_size= 0.340, 0.260
zorder=99

// VIRTUAL COCKPIT SECTION STARTS HERE //////////////////////

// Default FSX Garmin 500 GPS display ---------------------

[Vcockpit00]
Background_color=36,36,36
size_mm=1024
visible=1
pixel_size=1024,1024
texture=$GLJ25_01_G_C
gauge00=fs9gps!gps_500,211,248,670,586

// Dummy radar display -------------------------------------

[Vcockpit01]
Background_color=36,36,36
size_mm=1024
visible=1
pixel_size=1024,1024
texture=$GLJ25_05_G_C
gauge00=XPGLJ25v2!dummy_radar_screen,212,270,602,445

// Tail number plaque (do not edit) ----------------------- 

[Vcockpit02]
Background_color=0,0,0
size_mm=256
visible=1
pixel_size=256,256
no_luminous=1
texture=$GLJ25_04_G_C
gauge00=XPGLJ25v2!n_number_plaque,0,0,250,100

// First optional panel ------------------------------------

[Vcockpit03]
Background_color=36,36,36
size_mm=1024
visible=1
pixel_size=1024,1024
// no_luminous=1
texture=$GLJ25_02_G_C
// gauge00=Lear_45_XML!PFD,248,119,536,800
gauge00=F1GTN!GTN750,248,119,536,525,UNIT1.VC
gauge01=F1GTN!GTN650,248,644,536,275,UNIT1.VC

// Second optional panel -----------------------------------

[Vcockpit04]
Background_color=36,36,36
size_mm=1024
visible=1
pixel_size=1024,1024
// no_luminous=1
texture=$GLJ25_03_G_C
gauge00=Lear_45_XML!EICAS,248,119,536,800

// System gauges (do not edit) ----------------------- 

[Vcockpit05]
Background_color=0,0,0 
size_mm=256,256
visible=0
pixel_size=256,256
texture=$GLJ25_03_G_D
gauge00=XPGL25v2_Sound!FBGS_XMLSound, 18,5,1,1,SimObjects\\Airplanes\\XP_Gates_Learjet_25_v2r1\\sound\\extra#48
gauge01=XPGLJ25v2!misc_systems, 20,5,1,1

 

Edited November 26, 2017 by Dean33
CFG ADDED THEN CORRECTED

[Mangouste 13]

hello

No integration function works with the RXP 750. You tell me about the GTN F1 while I talk about the RXP GTN.

[Indy511 686]

57 minutes ago, Mangouste said:

hello

No integration function works with the RXP 750. You tell me about the GTN F1 while I talk about the RXP GTN.

I believe Dean posted a panel.cfg setup for the F1 750. (This creates the positions for the RXP 750). Create a panel.cfg with the contents from above then use the RXP panel assistant to integrate the RXP 750. I don't have the Lear... but that should work.

[Mangouste 13]

Hello

No it does not work . If it is possible to do this kind of thing with other aircraft like Carenado for example. With this one the integration RXP is impossible.

[Indy511 686]

4 hours ago, Mangouste said:

With this one the integration RXP is impossible.

It will work.

I will post step by step later tonight.

http://

[Indy511 686]

10 hours ago, Mangouste said:

Hello

No it does not work . If it is possible to do this kind of thing with other aircraft like Carenado for example. With this one the integration RXP is impossible.

https://www.avsim.com/forums/topic/521969-official-panel-configuration-thread/#comment-3757775

[Mangouste 13]

Thank you for taking the time to explain.

Unfortunately even following your instructions correctly. Impossible to replace the gauges it looks like P3D V4.1 does not want to listen to the replacement instructions. the plane always has the original gauges.

I did the test three times, nothing to do. It looks like it keeps in memory the old configuration and refuses to replace the gauges, I always see the original gauges. P3D V4.1 or RXP one of the two does not want to.

luckily I have the windows RXP which works well.

[RXP 2,336]

38 minutes ago, Mangouste said:

luckily I have the windows RXP which works well.

It looks like the assistant if not able to 'write' the changes to the panel.cfg file if I follow correctly, but I'm not sure to understand this. Can you explain?

[Mangouste 13]

1 hour ago, RXP said:

It looks like the assistant if not able to 'write' the changes to the panel.cfg file if I follow correctly, but I'm not sure to understand this. Can you explain?

Hello.

Yes it takes into account but makes no change in the cockpit, modifying with the tutorial Bills511.

[RXP 2,336]

Ok, can you let me know the full path to your P3D4 installation?

Can you cross check the content of "Documents\rxpGTN_menu.dll.log" if any?

[Mangouste 13]

D:\Pepar3D V4

and :

;//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;// Reality XP Keyboard Shortcuts Configuration File - v1.0
;//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;//
;// [SHORTCUTS]   Keyboard shortcuts section. Shortcuts must be configured in this INI file located at:
;//               "My Documents\Flight Simulator Files"
;//
;// every function support any combination of ALT+CTRL+SHIFT+WIN+KEY with the following valid KEY:
;//
;// F1 to F24, 0 to 9, A to Z, NUMPAD0 to NUMPAD9, BACK, TAB, CLEAR, RETURN, ESCAPE,
;// SPACE, PAGEUP, PAGEDOWN, END, HOME, LEFT, UP, RIGHT, DOWN, SELECT, PRINT, EXECUTE, SNAPSHOT, INSERT, DELETE, HELP,
;// MULTIPLY, ADD, SEPARATOR, SUBTRACT, NUMPADDOT, DIVIDE,
;// BROWSER_BACK, BROWSER_FORWARD, BROWSER_REFRESH, BROWSER_STOP, BROWSER_SEARCH, BROWSER_FAVORITES, BROWSER_HOME,
;// LAUNCH_MAIL, LAUNCH_MEDIA_SELECT, LAUNCH_APP1, LAUNCH_APP2,
;// MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE,
;// VOLUME_MUTE, VOLUME_DOWN, VOLUME_UP,
;//
;// Disable a shortcut: leave the line empty after the '=' sign.
;// Define a shortcut : write the key definition after the '=' sign to configure a shortcut.
;//
;// For example, FUNCTION_NAME=CTRL+SHIFT+N controls the function 'FUNCTION_NAME' with 'CTRL+SHIFT+N'
;//
;//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

[SHORTCUTS]
TOGGLE_WINDOW_1 = ALT+SHIFT+1
DTO_1 =
HOME_1 =
VOL_PUSH_1 =
VOL_CCW_1 =
VOL_CW_1 =
FMS_PUSH_1 =
FMS_OUTER_CCW_1 =
FMS_OUTER_CW_1 =
FMS_INNER_CCW_1 =
FMS_INNER_CW_1 =
CDI_SOURCE_1 =
OBS_MODE_1 =
TAWS_INHIBIT_1 =
TOGGLE_WINDOW_2 =
DTO_2 =
HOME_2 =
VOL_PUSH_2 =
VOL_CCW_2 =
VOL_CW_2 =
FMS_PUSH_2 =
FMS_OUTER_CCW_2 =
FMS_OUTER_CW_2 =
FMS_INNER_CCW_2 =
FMS_INNER_CW_2 =
CDI_SOURCE_2 =
OBS_MODE_2 =
TAWS_INHIBIT_2 =
RXP_GPS_MASTER_DEVICE_0 =
RXP_GPS_MASTER_DEVICE_1 =
RXP_GPS_MASTER_DEVICE_2 =
RXP_GPS_MASTER_DEVICE_NEXT =

[RXP 2,336]

2 hours ago, RXP said:

"Documents\rxpGTN_menu.dll.log"

I thank you for the information, however, this content doesn't look like the one in the aforementioned file. If there is no such file on your drive, then just let me know there is none.

As for P3D4 path, can you cross check your account has 'write' access rights to the aircraft folder you are trying to modify with the assistant? (something like "D:\Pepar3D V4\SimObjects\Aircraft\XP_Gates_Learjet_25_v2r1" I'd guess)

Also, are you running P3D4 as admin? If so, you shouldn't, and can you cross check the assistant works when not running in admin, but 'just' as normal user?