Jump to content
Sign in to follow this  
Riah069

P3D Booster Live 2018

Recommended Posts

7 minutes ago, vgbaron said:

It uses a sliding bar to reduce your settings and hopefully increase your fps. Snake oil chasing the fps monkey. You can do the same for free - just reduce all your settings.

Vic

I think the author/s of this product may be hoping to capitalise on the fact that there are many simmers who are unsure what sliders to back off or are unwilling to spend time experimenting. If so, then why not? Hopefully any gains in performance come about as a result of judicious adjustments of the various in-sim settings based on known and proven evidence rather than by employing a blunderbus approach. Doubtless there will be some Prepar3D.cfg tweaks thrown into the mix. Again, one can only hope that these are sensible, are also based on good evidence and don't risk disturbing the overall balance of the user's setup.

There is always the temptation to ramp up settings to unrealistic values, particularly on weaker systems, so this tool might just prove to be an invaluable addition to the flight sim armoury of some users. Achieving great performance away from high density scenery areas is relatively easy, not so much around complex airports and cities. What would be helpful is to have a tool that can adjust settings appropriately on the fly during a flight. Not sure whether this tool can do this or even if it's at all possible.

Mike

 

 

Share this post


Link to post
46 minutes ago, vgbaron said:

It uses a sliding bar to reduce your settings and hopefully increase your fps. Snake oil chasing the fps monkey. You can do the same for free - just reduce all your settings.

Vic

Hi,

Why do you not post a video with your assumption?

 

Regards

Achilles

  • Upvote 1

Achilles

Flight Simulator Plaform Solutions

Share this post


Link to post
8 hours ago, Afterburner said:

If you want better FPS, you just turn down some sliders in the display settings to your liking. For that, I don't need a $15 tool that does it for me...

 Come on man, now you’ve shared the most important secret for free...

  • Upvote 2

13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

Looks like a dynamic FTFF tool. 

More processor power - less graphics quality

Less processor power - better graphics quality

 

Around 2000-2002 there was a program that helped with framerates by dynamically adjusting the AG density.

Such a program but then improved would be very welcome.

Desired , but realistic framerate - Dynamic AG settings - Dynamic LOD setting - Dynamic Mesh resolution - Dynamic Traffic settings

That I would buy immediately ...


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

Yes, to answer the OP's question, it does indeed work, or at least I know it does in FSX, along with some of their other tools which also do work. However, there's a caveat to that which is this: Whilst technically it doesn't really do anything you couldn't do by moving the option sliders, what you can't do without that tool, is move the option sliders on the fly, the sim would think about it and reload if you did it with the options sliders alone. That's the advantage the tool confers. So because you can make changes 'on the fly' without seeing a load screen or a progress bar, it's a bit more convenient, which is what the 'Live' part of its product name refers to.

Now you might not think that matters too much, to some extent that is a matter of how much a load screen bothers you, but, you can dynamically tweak the settings and see the change take place in the sim, so it is at least going to let you make a visual comparison on the fly when you turn stuff down. Whether you think that's worth ten quid is up to you, personally, I thought it was kind of worth it for FSX when VAS was a issue, because it meant I could whack the 'speed me up' slider over when near the end of a flight and it helped to prevent VAS issues closing the sim down after a long flight in something like the FSL A320 as a fancy payware airport loaded up into the sim, and it also meant that when up at 35,000 feet, I could drop the ground detail down on the fly in order to up the FPS. So yeah, it does work, but as long as you understand how it does what it does and that the advantage is really in being able to do that 'live' as you fly, then you can decide whether you think it's worth the price of entry.

  • Like 1

Alan Bradbury

Check out my youtube flight sim videos: Here

Share this post


Link to post
1 hour ago, GSalden said:

Around 2000-2002 there was a program that helped with framerates by dynamically adjusting the AG density.

Such a program but then improved would be very welcome.

Desired , but realistic framerate - Dynamic AG settings - Dynamic LOD setting - Dynamic Mesh resolution - Dynamic Traffic settings

That I would buy immediately ...

+1

I always wondered why there isn't an option in the sim to set a (reasonable) fixed framerate and then let the sim automatically and dynamically adjust the performance-relevant sliders like autogen and traffic (maybe within customized min-max-intervals) to maintain that fixed framerate.

Share this post


Link to post
2 hours ago, RALF9636 said:

+1

I always wondered why there isn't an option in the sim to set a (reasonable) fixed framerate and then let the sim automatically and dynamically adjust the performance-relevant sliders like autogen and traffic (maybe within customized min-max-intervals) to maintain that fixed framerate.

That's an easy one - because THEN people would complain that there's not enough autogen and/or traffic.

Vic

  • Upvote 1

 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post
6 hours ago, vgbaron said:

That's an easy one - because THEN people would complain that there's not enough autogen and/or traffic.

Vic

If then they would have a smooth Sim they probably would prefer that...

And less AG would only appear in very detailed areas where otherwise the Sim would start to stutter.

Regarding FSPS : they have released multiple tools to help with smoothness over the years. The most known is Fiber Accelerator. I did try that one and while it helped with gaining some framerate it sometimes gave me blurries.

 If you set your Sim to be smooth at the most demanding environment you won’t need this tool. If you would like better graphics and more detail in a less demanding environment it might help. 

And I agree with Chock completely.

Here a review on FSX Booster

http://www.simflight.com/2011/03/19/review-fsx-booster-v2-9-6/

Here an review from Froogle about their Fiber Accelerator

Regards,

Gerard


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post

FSPS - P3D FIBER ACCELERATOR

What is the difference between the 2 products?


 

MSFS2020 ,P3D V5, Ryzen 3600 4.2GHZ, 32GB 3000 Ram, Nvidia GTX 1600 Super 6GB, 22 inch 75 hz Monitor , Windows 10 204, Toposim,   Orbx Global, Vector, Europe  N & S California LC, England Regions,  England, PMDG 737, 777, Majestic Q400 and Aerosoft Airbus A318-20.

Share this post


Link to post
5 minutes ago, Langyboy63 said:

FSPS - P3D FIBER ACCELERATOR

What is the difference between the 2 products?

Live Booster : built to make a large amount of incremental changes to the configuration and the settings of your Fs software and make it run at a higher level than previously. Slider changes without reloading the scenery

Fiber Accelerator : set a "Lower Frames per second" target. This will be the number of frames Prepar3D will try to catch up, according to your needs, lowering graphics quality (always gradually from places you cannot see anyway, moving closer to your position). This happens dynamically

They work best on mid and low end systems 


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post
13 hours ago, vgbaron said:

That's an easy one - because THEN people would complain that there's not enough autogen and/or traffic.

Vic

Lol, people always complains.. Not matter what.

S

Share this post


Link to post
2 hours ago, simbol said:

Lol, people always complains.. Not matter what.

S

Right on the money.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...