Jump to content

Sign in to follow this  
Johnny19

P3D 4.1 CTD near Labrador

Recommended Posts

19 minutes ago, B777ER said:

If using GSX only, you are still using Couatl.

Did I imply otherwise?

Share this post


Link to post

Two attempts with the HOIST FP and no CTD for me. Guess I'll try it with ASP4 running to see if that changes anything. 

Share this post


Link to post
4 hours ago, Bardia said:

I only have GSX out of all their products and experienced the crash so can’t be anything to do with the airports but rather the GSX itself. 

Yeah, Couatl is the scripting engine.  It is installed with any FSDT product.  Like you said, I don't think it is the airports themselves causing the crash, but the scripting engine.  However though, like I said in a previous post, i never had this problem in v3 with the only difference being I had no ORBX products installed in v3 (was using the Flight1 stuff in V3).  So maybe there is a conflict?  Again, this is just a guess.

 I have done about 6 westbound pond crossings 3 with HOIST.  One of the HOIST flights had couatl running and crashed, the 2 other HOIST flights were fine.  The other 2 flight plans I tried were flown with waypoints just south of HOIST.  One came in through ELSIR, one from RIKAL, the last, a bit more north through PORGY.  All in the vicinity of HOIST and with couatl not running I had no crash.  In total 6 flights 5 with no couatl all landed.  I am starting one flight now  gonna go thru HOIST again no couatl, results in a bit

Edited by nazethc
spelling...again

Share this post


Link to post
13 minutes ago, nazethc said:

Yeah, Couatl is the scripting engine.  It is installed with any FSDT product.  Like you said, I don't think it is the airports themselves causing the crash, but the scripting engine.  However though, like I said in a previous post, i never had this problem in v3 with the only difference being I had no ORBX products installed in v3 (was using the Flight1 stuff in V3).  So maybe there is a conflict?  Again, this is just a guess.

 I have done about 6 westbound pond crossings 3 with HOIST.  One of the HOIST flights had couatl running and crashed, the 2 other HOIST flights were fine.  The other 2 flight plans I tried were flown with waypoints just south of HOIST.  One came in through ELSIR, one from RIKAL, the last, a bit more north through PORGY.  All in the vicinity of HOIST and with couatl not running I had no crash.  In total 6 flights 5 with no couatl all landed.  I am starting one flight now  gonna go thru HOIST again no couatl, results in a bit

Could be a conflict but that would be fairly easy to check. Fly the west-bound HOIST route that you once crashed with couatl running but this time disable everything ORBX-related in your scenery library. See what happens. 

Share this post


Link to post
Just now, Bardia said:

Could be a conflict but that would be fairly easy to check. Fly the west-bound HOIST route that you once crashed with couatl running but this time disable everything ORBX-related in your scenery library. See what happens. 

Just took off from EDDF with PMDG B77W to KJFK on the HOIST FP with couatl off.  Gonna try what you suggested after I complete this flight.

 

Share this post


Link to post
16 minutes ago, nazethc said:

Just took off from EDDF with PMDG B77W to KJFK on the HOIST FP with couatl off.  Gonna try what you suggested after I complete this flight.

 

Thanks. 

Share this post


Link to post

I've had this crash happen over north america and I have had it happen now twice over the UK too. I was flying from EFHK to EGCC and overhead Waypoint RIVOT my sim crashed with ntdll.dll being the cause.

Dxjyye5.png

 

Addons used: 

P3D V4.2, FsLabs A320, ENVTEX, ASCA, AS2016 P3D V4, GSX, Aerosoft Helsinki, UK2000 Manchester, Orbx FTX Global, Open LC EU, Vector

Im going to fly the same route without coutl.exe next time.

Share this post


Link to post
58 minutes ago, BlueFinn said:

I've had this crash happen over north america and I have had it happen now twice over the UK too. I was flying from EFHK to EGCC and overhead Waypoint RIVOT my sim crashed with ntdll.dll being the cause.

Dxjyye5.png

 

Addons used: 

P3D V4.2, FsLabs A320, ENVTEX, ASCA, AS2016 P3D V4, GSX, Aerosoft Helsinki, UK2000 Manchester, Orbx FTX Global, Open LC EU, Vector

Im going to fly the same route without coutl.exe next time.

I don’t personally think your crashes are related to the very specific one being discussed here, though I may very well be wrong. 

Share this post


Link to post

8x to about 150 dme HOIST, down to 1x, now on the STAR for JFK.  No crash.

Next test i'm going to try will be with only Orbx Vector off  and couatl on. 

Results soon.

Edited by nazethc
grammar

Share this post


Link to post

I have the same Problem, with 2 different computer (but same addons)

1. Computer with P3D v4,1

CPU i7-7700k oc 4,6 (mult. 46,0 x 100MHz)   Noctua NH-D14 cooler (tested with default CPU)
GPU MSI GeForce GTX 1070 Gaming X 8G V330-001R
MotherBoard: MSI H270 Gaming Pro Carbon Intel H270 So.1151 Dual Channel
RAM 16GB Corsair Vengeance LPX schwarz DDR4-3000 DIMM CL15 Dual Kit
PSU Corsair CX750M
SSD 1000GB Samsung 850 Evo 2.5"

 

2 Computer P3D v4,2

Intel Core i5 8600K 6x 3.70GHz So.1151 TRAY (tested with dafault CPU and with OC 5,2Ghz)
Gigabyte Z370 HD3P Intel Z370 So.1151 Dual Channel DDR4 ATX Retail
16GB G.Skill RipJaws V schwarz DDR4-3200 DIMM CL16 Dual Kit
4000GB WD Red WD40EFRX 64MB 3.5" (8.9cm) SATA 6Gb/s
500GB Samsung 850 Evo 2.5" (6.4cm) SATA 6Gb/s TLC Toggle (MZ-75E500B/EU)
Noctua NH-D15
11GB ZOTAC GeForce GTX 1080 Ti Blower Aktiv PCIe 3.0 x16 (Retail)

 

Addons:
PMDG 777, 747, 737NGX, FTX Global, Vector, OpenLC Europa, North America, South America, Trees HD

FSDT KLAX, KJFK, CYVR, KBOS FlyTampa, EGLL, EDDM, LFPG, EHAM....

GSX

AS p3d v4 + ASCA

FSUIPC Latest Version
 

Today CTD 10 mn before LAKES

But usually always over Nova Scotia, Newfoundland and Labrador, on westbound transatlantic flights, never on eastbound

I try tomorrow to fly without coautl.exe

 

Share this post


Link to post

Ok,

8x to 150 dme HOIST, then 1x, Orbx Vector off, couatl on, just crossed HOIST intersection no crash.

Now all we need is some more people to experiment with this to see if we all get the same results.

 

Share this post


Link to post
25 minutes ago, nazethc said:

Ok,

8x to 150 dme HOIST, then 1x, Orbx Vector off, couatl on, just crossed HOIST intersection no crash.

Now all we need is some more people to experiment with this to see if we all get the same results.

 

Couatl+Vector conflict sounds like a long shot mate, not saying impossible but how can they possibly even interact with one another?

Share this post


Link to post

Well I have no idea.  Those we're my findings from the tests. If someone else can answer that for you, great.  What I know is now I can fly the pond westbound without the annoying crash.  If anyone can figure out what the interaction is between the two would be the icing on the cake.  I've run about 10 flights the past 2 days....couatl off Vector on no crash.  Couatl on vector off no crash.  Couatl on vector on crash.  Reason?  No clue.

Share this post


Link to post

Weighing back in here, because I just had a crash for the first time in a while.

iFly 747, P3D 4.1, EHAM - KJFK nearing NICSO waypoint (St. John's, New Brunswick, Canada)

AS16, GSX.

Prepar3D.exe Stopped working 2018-03-10 8:04:10 PM All Users 0xc0000374 A heap has been corrupted.
  StackHash_f04d 10.0.15063.608 C:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe 43,732 C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_f5e3c1d19af3fe713e973c3db98d520676f60be_911d388a_1f48d222\Report.wer 
 

Version=1
EventType=APPCRASH
EventTime=131652038505043012
ReportType=2
Consent=1
UploadTime=131652038508030968
ReportStatus=268435456
ReportIdentifier=a05b3ec1-463e-4950-a268-212e4d369d98
IntegratorReportIdentifier=b684dc38-87b9-4c3c-a9c3-a38ba1f8f393
Wow64Host=34404
NsAppName=Prepar3D.exe
AppSessionGuid=00001f04-0001-0089-c44c-b72bbfb8d301
TargetAppId=W:0000f0e3cd7a622a9f58f96eda9e904fcd8500000904!0000fe4ba4844cdbd482c25c2fa58f1644d0a18615dd!Prepar3D.exe
TargetAppVer=2017//10//05:18:48:53!2d051c!Prepar3D.exe
BootId=4294967295
TargetAsId=578
Response.BucketId=bd5a8edef405bd159539cecb81fe1d73
Response.BucketTable=4
Response.LegacyBucketId=120849805614
Response.type=4

 

It occurred to me that I had been Restarting COUATL after every pushback (someone had suggested it once, so I made it practice to do - forgot this time). I wonder if that would have prevented this one?

- Daniel

Share this post


Link to post

Here's another one.... PMDG 747

Route: EGLL CPT3F CPT UL9 DIKAS UP4 EVRIN DCT LIMRI/M083F340 DCT 5320N DCT 5430N DCT 5440N DCT 5350N/N0472F340 DCT RIKAL/N0481F360 N436A ALLEX Q822 AJJAY OOSHN5 KBOS

Add-ons used during flight: ORBX Global, Vector, OpenLC NA and EU, Terra Flora, departed from Aerosoft London Heathrow Professional. Active Sky + ASCA + ENVTEX + ENSHADE. I used GSX for the jetway docking as well as the pushback. During my taxi I restarted couatl as it seemed to get me through the flight the last time, but not this one. Another ntdll crash, I was using Navigraph Charts remotely on my tablet, I took a screenshot of everything so you can see where I was at. The sim was at 8x speed during time of crash. I clicked nothing, was just staring at the screen and it happened. Seems I keep getting the crash right there around the Gander Oceanic/Domestic FIR line as you can see on the Navigraph chart.

Navigraph Chart position

Edited by PWJT8D

Is it done yet? When will it be released? Will it be freeware or payware? How much will it be? Any updates on the progress? Will it work for FSX? What's the minimum requirements? Can I be a beta tester?

Share this post


Link to post
Guest
This topic is now closed to further replies.
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    34%
    $8,560.00 of $25,000.00 Donate Now
×
×
  • Create New...