Jump to content
Sign in to follow this  
Stefan01

Request help for FSLabs Tiller Pedal Pos showing on MCP

Recommended Posts

Hi all,
I would like to show permanently on MCP instead of weather data the position of the 'VC_PEDAL_DISC_CPT' as long as it is in down position.
I tried to modify weather display function from the actions.lua in my user.lua but somehow with no success because I am not an expert in lua.
I enclosed my attempt to modify this part of the actions.lua and I appreciate if someone could help.
thanks a lot Stefan

 -- display Weather data and Pedal Pos on MCP display
    Baro = round(ipc.readUW("0EC6")/16)
    OATval = round(ipc.readUW("0E8C")/256)
    WINDval = round(ipc.readUW("0E90"))
    WindDir = round(ipc.readUW("0E92")*360/65536)
local Lvar = 'VC_PEDAL_DISC_CPT'
    local pos = ipc.readLvar(Lvar)

    if OATval > 100 then OATval = OATval - 256 end

    if pos > 0 then
UpperInfoLong = "Tiller"

elseif not Airbus then
        UpperInfoLong = Baro
        if (OATval >= 0) and (OATval < 100) then
            UpperInfoLong = UpperInfoLong .. " " .. OATval .. "C"
        elseif OATval < 0 then
            UpperInfoLong = UpperInfoLong .. " -" .. math.abs(OATval)
        else
            UpperInfoLong = UpperInfoLong .. " " .. OATval
        end
        LowerInfoLong = WindDir .. '/' .. WINDval
        if WINDval < 100 then
            LowerInfoLong = LowerInfoLong .. "kt"
        end
    else
        UpperInfoLong = Baro
        LowerInfoLong = OATval .. 'C'
    end
       

 

 


regards
Stefan Liebe

Share this post


Link to post
Share on other sites

I tried 2 different user.lua but no success. If someone could give a hint I would be lucky
thanks Stefan

-- $$ tiller
function SL_PEDAL_DISC_CPT_toggle()
    local Lvar = 'VC_PEDAL_DISC_CPT'
    local pos = ipc.readLvar(Lvar)
    local val = 76024
    ipc.control(FSL, val)
    ipc.sleep(200)
    local val = 76026
    ipc.control(FSL, val)
    ipc.sleep(200)
    pos = ipc.readLvar(Lvar)
    if pos > 0 then
         DspShow('CPdl', 'down')
         UpperInfoLong = "TILLER"
    else
        DspShow('CPdl', 'up')
        end
 end

--display Pedal Pos
 
    local PedMode = ipc.readLvar('VC_PEDAL_DISC_CPT')
    if PedMode == 0 then
        PedModeTxt = "UP"
    else
        PedModeTxt = "DOWN"

    end
    if PedMode == 0 then
        if _MCP2a() then
            UpperInfoLong = "PED " .. PedModeTxt
            LowerInfoLong = ""

        else
            UpperInfoLong = "PED"
            LowerInfoLong = PedModeTxt

        end
    end

 

 


regards
Stefan Liebe

Share this post


Link to post
Share on other sites

Hello Stefan,

 

I have made a function for you, which you can insert into the original actions.lua

The info will appear on the left side on the display (not in the middle where the weather currently is)

However I do not know if you have an MCP airbus style and if so, if it will work then. I have tested it with my MCP II Boeing style. Drop me a note if it does not work.

 

Insert this function into the actions.lua:

function VC_PEDAL_DISC_CPT_show ()

    PdlPos = ipc.readLvar("VC_PEDAL_DISC_CPT")
    if PdlPos == 0  then PdlPosTxt = "--"
    elseif PdlPos > 0  then PdlPosTxt = "on"
    end

    com.write(dev, "A/TPd", 8)
    com.write(dev, "F/D" .. PdlPosTxt , 8)
end

and insert this line under the Timer function:

    VC_PEDAL_DISC_CPT_show ()

 

Should look like this then:

function Timer ()

    VC_PEDAL_DISC_CPT_show ()

 

As I said, if you prefer an other solution, let me know.

Note: this is just a solution for you. The public release for the FSLabs module will be unchanched. maybe we add this at a later stage

 

Viel Spaß,

Günter

  • Upvote 1

Guenter Steiner
--------------------------------------------------------------------------------------

Betatester for: A2A, LORBY, FSR-Pillow Tester
--------------------------------------------------------------------------------------

Share this post


Link to post
Share on other sites

Hallo Günter;

vielen Dank. Ich habe auch das Boeing MCP_2 Panel.

Wenn ich die actions lua wie angegeben ändere habe in der linken Anzeige links von SPD oben die Buchstaben "Pd" und darunter "--".
Die Anzeige ändert sich nicht egal ob ich die Pedals ein - oder ausschalte. Ohne die Änderung in der actions.lua sind links von SPD 2 Striche und darunter links der Ziffern auch.

Ich gehe davon aus, dass da an der Positionierung der Zeichen noch etwas nicht stimmt.Ich nehme an das sind die Zeilen die mit com. write beginnen.

Ich werde versuchen mit try und error eine Lösung zu finden so, dass die Meldung auf 2 Zeichen reduzeirt ist.
Ich melde ob ich erfogreich war.

nochmals vielen Dank Stefan

 


regards
Stefan Liebe

Share this post


Link to post
Share on other sites
1 hour ago, Stefan01 said:

Wenn ich die actions lua wie angegeben ändere habe in der linken Anzeige links von SPD oben die Buchstaben "Pd" und darunter "--".

 

hmmm, seltsam... ich habs natürlich getestet.

Und wenn Du Pd und die Striche schon siehst, dann klappts ja eigentlich.

Ich vermute dann eher, wir verstehen uns nicht ganz: ich meine, wenn der Steering Tiller gedrückt ist (VC_PEDAL_DISC_CPT)

 

Ich habe als Anzeige "Pd --" für nicht gedrückt und "Pd on" wenn gedrückt. (Können wir gerne noch ändern, wenn DU eine bessere Idee hast) Hab allerdings direkt mit der Maus im VC den Tiller gedrückt... gibts da noch andere Möglichkeiten?


Guenter Steiner
--------------------------------------------------------------------------------------

Betatester for: A2A, LORBY, FSR-Pillow Tester
--------------------------------------------------------------------------------------

Share this post


Link to post
Share on other sites

Hallo Günter,

mein Fehler, ich habe bei den Options die Warning Notice auf OFF gesetzt und auch die Pedal Disc BTN Sticky auf OFF gesetzt. Dadurch war der Button nur kurz down und die Anzeige kam natürlich nicht.

Jetzt ist der Button auf Sticky und die Anzeige funtkioniert.

Nochmals vielen Dank für die Sonderbehandlung.

viele Grüsse Stefan.

P.S.: Donation folgt...diesmal an die richtige Adresse


regards
Stefan Liebe

Share this post


Link to post
Share on other sites

:cool:

Danke Dir!


Guenter Steiner
--------------------------------------------------------------------------------------

Betatester for: A2A, LORBY, FSR-Pillow Tester
--------------------------------------------------------------------------------------

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...