Hello,

I did my 3rd flight this plane today and i've noticed all the VFR approaches only the "500feet callout" is played. I checked the sound folder at \Sound\Carenado\CarSoundF50 and there are definitely full altitude callout audios from 2500feet to 10 feet already installed. I might be doing my approach or even preflight checks wrong. Any idea how to enable the callouts? BTW i have not enable GT750 installed.

Regards.

Maybe post in the F50 forum..

Mine misses out the 10 feet callout out so my first landing was a bit of a thumper!

Bill

By me the same problem. Only sound for 500. No further anounces. I hope for a solution.

Jopoloco

I also have only the 500.. nothing else..

Post in the F50 forum..

I get all the callouts, 1000, 500, down to "20"...

This is with the GTN750 enabled..

Bert in which sim are you flying? I still only get the 500 in p3d v4.

Same for me, only 500 ft

1 hour ago, Torsen said:

Bert in which sim are you flying? I still only get the 500 in p3d v4.

P3Dv4.0.

What messages do you get when you push the GPWS test button?  I find that it takes 20 secs or so before it starts up, but if you click on the left Test button, and wait patiently, it will talk you through all the stored messages.

Edited March 14, 20188 yr by Bert Pieke

I'm on 4.1. The test button plays all messages like pull up, wind shear, terrain, minimums etc but no heights!?

I  use P3Dv4.2 but I don’t get any messages when I push that GPWS test button. Also NOS call outs. I have F1GTN installeren. When I load the liet version and I push the testbutton I get the messages, but at An approach also only the 500 ft call.

Can confirm only "500 feet" using P3DV4, when using P3DV3 I'm getting "all" the altitudes however.

Unlike tombollie, I don't get the callouts in P3Dv3, except "500".

I have done a reinstall with AV off and have installed Bert's mods for the GTN.

Makes the flare very difficult...

I am puzzled by this all... no idea why some would get the callouts and others not..