Jump to content
Sign in to follow this  
RXP

[22DEC22] RXP GTN 750/650 Touch X-Plane v2.6 Released!

Recommended Posts

Get the latest version available via Plugin | Reality XP GTN | Check Updates...

Then select Download update, navigate to the folder you want to use to store the file, then choose save:

Spoiler

1) When Software Update notification shows an available update:

update_notification_1.jpg

2) Click Download update to open a file browser window which defaults to the system folder:

update_notification_2.jpg

3) Navigate to a convenient folder of your choice, like Download or Documents folders:

update_notification_3.jpg

4) Press the Save button to download the file into this location.

5) Open a new File Explorer window (ALT+E) and navigate to the location you've just saved the file, unzip and run the setup program.

 

Otherwise download the latest e-commerce installers from our web site: Knowledge Base Article: Software Updates

Release notes:

v2.6.0

  • New: Official X-Plane 12 compatible release!
  • Enhanced: Panel drawing optimized for XP12.
  • Enhanced: User's Manuals updated for XP12.
  • Enhanced: Further stability and performance enhancements.

v2.5.30

  • New: Installer support the latest Garmin trainer launcher download v3.6.0.0.
  • New: Gracefully reboot the device upon Garmin trainer runtime code errors (like a real device).
  • New: Menu option to display the content of the log files.
  • Fixed: Installer typo was affecting the correct detection of the currently installer trainer launcher.
  • Enhanced: Further stability and performance enhancements.

v2.5.29

  • Fix: Win11 compatibility enhancements.
  • Fix: workaround XPDR not updating both mode and code at once when using dual GTN.
  • Fix: rare case where the aircraft electrical buses weren't properly detected.
  • Enhanced: Further stability and performance enhancements.

 

Earlier release notes:

 

v2.5.28.6

  • New: Compatible with latest Garmin Trainers: Launcher 3.2.3 with Databases 2104 (May/June 2021)

v2.5.28.5 (silent update)

  • Installer only update compatible with latest Trainer Launcher 3.1.4

v2.5.28.5

  • New: Screen update optimizations cutting render time by half
  • New: fms_names dataref publishing master device active route waypoint names (see user's manual)
  • New: datarefs to override the RX/TX flags (Pro Version)
  • Fixed: rare case of settings data corruption
  • Fixed: rare case of trainer data corruption
  • Enhanced: Further stability and performance enhancements.

v2.5.28.2

  • Fixed: TCAD Traffic Alert when taking off or landing.
  • Fixed: xPilotClient plugin signature updated.
  • Fixed: RXP installation searching for trainer installer 3.0.0.0.

v2.5.28.1 (re-released)

  • New: Compatible with Garmin Trainer 3.0.1.0.

NB: This update includes no changes since January but the latest Trainer download link.

v2.5.28

  • New: Compatible with Garmin Trainer 3.0.0.0.

NB: While we're working on adding support for the newest GTN trainer version, this release is using the latest databases included with Garmin Trainer 3.0.0.0 and is compatible with the following GTN Trainers: 6.62.4, 6.62.3, 6.50.1 and 6.21.

v2.5.27

  • New: TCAD is compatible with the new XP11.50 TCAS datarefs.
  • New: TX/RX flags are now also using the new xPilotClient COM1/2 RX datarefs.
  • Fixed: GUI Settings Panel could fail changing settings properly (CTD with XP11.50).
  • Enhanced: Further stability and performance enhancements.

v2.5.26

  • New: Compatible with GTN Trainer v6.62.4 (Garmin Trainers v2.7.1.0)
  • Fixed: border.color setting supporting alpha (transparency).
  • Fixed: border.color setting RGB component values were not read correctly.

This release is compatible with the following GTN Trainers: 6.62.4, 6.62.3, 6.50.1 and 6.21 only.

v2.5.25

  • New: X-Plane 11 Autopilot GPSS mode coupling.
  • New: Additional X-Plane NAV/GPS DME datarefs overrides (speed/time).
  • Enhanced: Further performance improvements specific to the GTN trainer 6.62.3
  • Enhanced: 'Auto-Update Simulator GPS Waypoints' better matching X-Plane DB waypoints.
  • Fixed: popleft setting was working with the SHIFT key even if disabled.

v2.5.24

  • Fixed: GTN refreshing as smoothly as in previous versions (bug in 2.5.23).
  • Fixed: Touchscreen not working with GTN Trainer 6.21 (bug in 2.5.23).
  • Enhanced: Integration with XP11.50.
  • Enhanced: Further stability and performance enhancements.

v2.5.23

  • New: Compatible with GTN Trainer v6.62.3
  • Fixed: Gauge window loosing resize controls in-sim when reverting from popout style.
  • Enhanced: User's Manual corrections.
  • Enhanced: Additional AVX512 and AVX2 optimizations.
  • Enhanced: Further stability and performance enhancements.

This release is compatible with the following GTN Trainers: 6.62.3, 6.62.1 and 6.21 only.

v2.5.22.2

  • Fixed: Environment Variables not working (bug introduced in 2.5.22.1).
  • Fixed: X-Plane CTD when using external views and "Auto Hide Window" option.
  • Enhanced: Graphics engine using latest AVX512 and AVX2 instruction set.
  • Enhanced: Print the expected FPLN path to rxpGtnSim.dll.log if not found.

This is a mandatory bug-fix update (bugs introduced in 2.5.22.1)

v2.5.22.1

  • Fixed: CTD when changing aircraft.
  • Fixed: Shared datarefs values can fail 3rd party aircraft integration.

This is a mandatory bug-fix update (bugs introduced in 2.5.22)

v2.5.22

  • New: Supports latest Garmin Trainer with updated DB (cycle 1909).
  • New: Displays TX/RX COM flags with xPilotClient (in addition to Pilotedge and xSquawkBox).
  • New: Synchronization between CDI mode and NAV/GPS switch can be bidirectional.
  • Fixed: Workaround LoadLibrary failed error 126 with some systems (experimental).
  • Fixed: Failure when the plugin is sending specific angle values to the trainer.
  • Enhanced: Optimized startup resources during POST.
  • Enhanced: Further stability and performance enhancements.

v2.5.21.1

  • Fixed: Device not coupling with the autopilot (bug introduced in 2.5.21).
  • Fixed: The trainer could fail sometimes with an FPU error.

This is a mandatory update if you've already installed 2.5.21

v2.5.21

  • New: Device flight timers counting at the same rate as the simulator running time, including pause and time acceleration (AUX pages).
  • New: User's Manual chapter "Gauges Dimensions" and other corrections.
  • Enhanced: Latest PFCHidReports DLL v3.2.5.109 supporting heterogeneous RXP devices with multiple hardware and the new PFC GTN hardware (req. Professional or GNS HW license).
  • Enhanced: Further stability and performance enhancements.

v2.5.20.2

  • Fixed: Default settings were not always working as expected (RealityXP.GTN.defaults.ini).

This is a mandatory update:
The component which is reading and writing the values to the settings files as a bug since v2.5.20.
This may damage the ini files or crash the device.

v2.5.20.1

  • Fixed: CTD when opening settings panel.

v2.5.20

  • New: Workaround most Post-Processing FX plugins issues when opening the settings (ReShade, SweetFx, etc...).
  • New: User's Manual chapter "Integration Guidelines".
  • New: Shared route data per device (in addition to the master device) (Pro Licenses).
  • Fixed: Rare condition which may prevent the screens from displaying anything.
  • Fixed: Rare condition which may prevent the trainer from shutting down properly.
  • Fixed: Shadin Fuel data input which may cause the trainer to crash.
  • Enhanced: Better handling of internal trainer errors.
  • Enhanced: Better handling of plugin 'LogTrainer' setting.
  • Enhanced: Further stability and performance enhancements.

Breaking Change: Shared route data datarefs have changed and are not backward compatible.
If you're using these, please make sure to contact us to get the latest Professional Additions Guide.

v2.5.19.1

  • New: Added support for the latest Garmin Trainer Launcher/Database 2.5.0.0

v2.5.19

  • New: Added support for the latest GTN Trainer v6.62.0
  • Fixed: The trainer may fail to clear the screen when powering off.
  • Fixed: The trainer may CTD sometimes (bug introduced since GTN v2.5.5).
  • Enhanced: User's Manual general corrections.
  • Enhanced: Further stability and performance enhancements.
  • Breaking Change: Shared EFIS Route datarefs (wpts) enhanced idents and more types (Pro Licenses).

v2.5.18

  • Fixed: The trainer fails to start if it was started as-admin once (black screen).
  • Fixed: Mixing GTN and GNS V2 on the same panel disables the GTN Audio Panel selections.
  • Fixed: The flight timers clock is now accurate (standalone trainer is not).
  • Enhanced: The flight timers vary with the host simulator time acceleration (Utilities).
  • Enhanced: Further stability and performance enhancements.

Please note: if you were running the simulator as-admin or if you're experiencing a Black Screen problem:
Running the simulator as-admin was preventing the trainer from running as a normal user afterward.
After installing this update, running the simulator as-admin just once more fixes the Windows access rights permanently.

v2.5.17

  • Critical: The plugin may sometimes lock up or fails starting the trainer.
  • Enhanced: Additional debug log settings are available to assist troubleshooting.
  • Enhanced: The popup gauge window can be dragged by its top edge if configured as 'no bezel'.
  • Enhanced: COM and NAV boxes also fail when com#_power and nav#_power datarefs are off (req. "Use Failures").
  • Enhanced: User's Manual general corrections.
  • Enhanced: Further stability and performance enhancements.

v2.5.16.1

  • Fixed: last autopilot issues reported in previous version.

v2.5.16

  • New: User's Manual chapter about the settings and their options.
  • New: Auto Power Source setting is using the aircraft electrical bus set for the GPS.
  • New: 'gtn_version' dataref for third party vendors.
  • New: Shared EFIS Route datarefs (wpts) (Pro Licenses).
  • Fixed: Shared Flight Plan datarefs (legs) (Pro Licenses).
  • Fixed: Autopilot coupling bugs when starting with Cold & Dark cockpit.
  • Fixed: Autopilot coupling bugs when using DG and VOR only panels (no HSI).
  • Enhanced: Further stability and performance enhancements.

v2.5.15

  • Fixed: Autopilot coupling bugs introduced in previous version.
  • Fixed: Various GPS datarefs output corrections (own and override).
  • Fixed: TAWS limits when changing aircraft.
  • Fixed: X-Plane default GPS commands always inhibited.
  • Fixed: Shared Route datarefs (Pro Licenses).
  • Enhanced: Configuration Panel optimizations and corrections.
  • Enhanced: User's Manual illustrations and typo corrections.
  • Enhanced: Further stability and performance enhancements.

v2.5.14

  • New: Auto-Detect Fuel Type.
  • New: Configuration Panel restores last used visible/hidden settings groups.
  • Fixed: Autopilot modes coupling with most aircraft.
  • Fixed: Power-On Self Test page fuel data with some fuel units.
  • Fixed: Configuration Panel could crash in some cases.
  • Fixed: Some settings not properly reset when changing aircraft.
  • Enhanced: Better auto-detection and handling of TAWS speeds limits.
  • Enhanced: Supports up to 8 rheostats instead of 4.
  • Enhanced: User's Manual has date and revision number.
  • Enhanced: Further stability and performance enhancements.

v2.5.13

  • New: Auto-Hide Window menu option hides popup in external view.
  • Fixed: Knob commands and keyboard shortcuts broken in last release.
  • Enhanced: Autopilot coupling and tracking precision.
  • Enhanced: Further stability and performance enhancements.

v2.5.12

  • New: Touch Screen supports VR controllers.
  • New: 'Optimize settings file' option (see manual).
  • New: 'Subscribe to product updates notifications' installer option.
  • Fixed: Autopilot coupling in NAV mode.
  • Fixed: Autopilot NAV->APPR automatic sequencing is now optional (see AFMS settings).
  • Fixed: RealityXP.GTN.defaults.ini not loading properly.
  • Fixed: TCAD targets not displaying descending arrow.
  • Fixed: Reload Plugin and overall plugin initialization.
  • Fixed: Trainer initialization random bug causing black screen/stuck process.
  • Enhanced: GUI Settings Panel presentation.
  • Enhanced: User's Manual illustrations
  • Enhanced: Further stability and performance enhancements.

VR controller:
They are now supported automatically and there is no need for the 'enable' file anymore!
NAV->APPR is now an opt-in setting only and requires 'AFMS GPS Selected

v2.5.11

  • New: VR controller support on the touch screen (experimental / see forum).
  • New: COM TX/RX flag display with new XPlane 11.30 ATC.
  • New: GTN Audio Panel uses new X-Plane 11.30 'Audio Marker Sens' dataref.
  • New: GPS Source setting selects which simulator GPS to override.
  • New: Autopilot NAV->APPR automatic sequencing with AFMS GPS Selected Auto.
  • New: defaults.ini file for third party aircraft vendors (see manual).
  • New: Additional fine-grained WAAS failure variables (Professional license Only).
  • Fixed: Bezel bitmap missing for GTN725, GTN635 and GTN625.
  • Enhanced: GUI Settings Panel presentation and logic.
  • Enhanced: GUI Settings Panel AFMS settings simplified.
  • Enhanced: TAWS limits auto-detection.
  • Enhanced: Instruments/Master pilot links and datarefs override (Panel Instrument Settings).
  • Enhanced: Instruments/Master pilot links when using both GNS and GTN.
  • Enhanced: User's Manual pagination and illustrations
  • Enhanced: Further stability and performance enhancements.

VR controller:

X-Plane 11 SDK doesn't provide controller state to plugins.
This version introduces an experimental hack to support VR controllers on the touchscreen.
Enable the hack in creating any file named:
“X-Plane\Output\preferences\RealityXP.GTN.vr_mouse_enable".
NB: file can be empty, only file name matters.

v2.5.10

  • New: Additional per device datarefs for third party integration.
  • Fixed: Power-On Self Test values (POST).
  • Fixed: Bug in the Garmin trainer own code (source of CTD and/or black screen).
  • Enhanced: User's Manual 'Custom Datarefs' and 'Troubleshooting' sections.
  • Enhanced: Further stability and performance enhancements.

v2.5.9

  • Fixed: Power-On Self Test DTK value (POST).
  • Fixed: Power-On Self Test Flight Director Test sequence (POST).
  • Fixed: HSI Course random rotation when coupled with the GTN.
  • Fixed: Mitigation of DLL loading errors introduced in previous version and Trainer v6.50.
  • Fixed: Installer failing to detect the latest GTN Trainer v6.50.1 installation.
  • Enhanced: Further stability and performance enhancements.
  • Enhanced: Environment variables updated (see User's Manual)

NB: we're re-released v2.5.9 installer on Nov 25, 2018 23:59UTC with corrections to the environment variables used to redirect the trainer paths. If you are using these, you might want to re-download the e-commerce installer from our website and re-install over. Make sure to review the up-to-date environment variables in the User's Manual too.

v2.5.8

  • New: Added support for the latest GTN Trainer v6.50.1
  • New: Save more than 100MB of RAM per device with unique Reality XP optimizations.
  • New: Additional 'RXP' failure vars to supplement missing defaults (XP9).
  • Enhanced: Further stability and performance enhancements.

About additional failure vars: some of the failure variables exist only in XP10 and XP11. The RXP GTN on XP9 supports these additions:
"RXP/operation/failures/rel_com1", "rel_com2", "rel_nav1", rel_nav2", "rel_navcom1", "rel_navcom2"

v2.5.7

  • New: Aircraft Flight Manual Supplement (AFMS) related settings.
  • New: Mark On Target discrete command (AFMS).
  • New: HSI CDI/GSI scaling factor (as in FltSim version).
  • Enhanced: Transponder VFR code presets (US/EUR or user VFRcode).
  • Enhanced: Additional power sources setting (electric buses 1 to 6).
  • Enhanced: Further stability and performance enhancements.
  • Enhanced: User's Manual corrections.
  • Fixed: GTN Settings Panel could CTD on some computers.

AFMS settings:

The GTN supports specific enablement features configured during installation in a real aircraft. These are regrouped in the configuration panel under Aircraft Flight Manual Supplement (AFMS) and allow changing between VNAV and VCALC modes (GTN Trainer v6.50+), selecting V-Flag Declutter, disabling CDI key etc...

v2.5.6

  • Enhanced: Further support for the latest GTN Trainer v6.50.

v2.5.5

  • Settings: Choose new Garmin / Jeppesen Aviation Databases for Rotorcraft (trainer v6.50).
  • Enhanced: Further support for the latest GTN Trainer v6.50.
  • Enhanced: Rendering at small screen size, further refinements from previous version.
  • Enhanced: User's Manual updated with correct references to new trainer v6.50 paths.
  • Enhanced: Validated Compatibility with GTN trainers v6.21, v6.41.
  • Enhanced: Added 2 new 'WAAS' failure datarefs.
  • Enhanced: Further stability and performance enhancements.

v2.5.4

  • New: Added support for the latest GTN Trainer v6.50.
  • New: With Garmin / Jeppesen Aviation, Obstacles and Safetaxi® Databases cycle 1803.
  • Enhanced: Rendering at small screen size.
  • Enhanced: Further stability and performance enhancements.

NB: this release focus is primarily GTN Trainer v6.50 compatibility.
It may break compatibility with previous trainers (6.41 and 6.21) and we'll make sure to review all code changes for these in a future update.

v2.5.3

  • Enhanced: Internal corrections to prevent the boot screens from freezing when TCAD is active.
  • Enhanced: Plugin graphics and renderer corrections.
  • Enhanced: Further stability and performance enhancements.

v2.5.2.1

  • Fixed: Mouse not working in 3D and VR in previous update.

v2.5.2

  • New: Settings | Gauge | Advanced | Link Simulator GPS Waypoints (updates XPlane GPS/FMS with next legs for EFIS display)
  • New: Settings | Gauge | Advanced | Auto-Save Active Route (.fms) (saves the active route to fms format)
  • Fixed: VR Windows general handling.
  • Enhanced: VR Windows display like 2D windows (no title, no edges).
  • Enhanced: Plugin menu updates properly in VR mode.
  • Enhanced: Knobs turn more naturally with left/right mouse buttons.
  • Enhanced: Gauge Tooltips corrections.
  • Enhanced: User's Manual corrections and additional information.
  • Enhanced: Further stability and performance enhancements.

The GTN inherits two new features first introduced in our FltSim version:

Link Simulator GPS Waypoints: continuously updates the stock GPS/FMS route with the next waypoints (requires Master Device). This feature is designed to displaying GTN route on EFIS displays. XPlane limitations: user waypoint ident or waypoint not in the XP database display as encoded lat_lon format.

Auto-Save Active Route: save the active route to "X-Plane\Output\FMS plans\Reality XP GTN1 Route.fms" (and GTN2 for unit 2). This is a v11 or v3 compliant fms file (depending on your XP version) with the entire active route (not just the next waypoints). The device saves the route whenever it changes so that the file contains the latest used.

This update also fixes the VR window handling issues encountered with our first VR version (2.5.1).

v2.5.1

  • New: Supports X-Plane 11.20 VR mode.
  • New: Added support to fail RAIM Check via datarefs.
  • New: Added discrete inputs datarefs.
  • Fixed: GTN overrides A/P and HSI when loaded with some aircraft (no reload needed).
  • Enhanced: TAWS auto-detected limits are properly saved in the ini file.
  • Enhanced: User's Manual corrections and additional information.
  • Enhanced: Further stability and performance enhancements.

X-Plane 11.20 VR:

XPlane has known limitations which you should know: resizing the window with 2 green bars changes the definition, not the size (makes the graphics pixelated), therefore, resize the GTN window 1 green bar at a time instead. Also, XPlane SDK permits restoring the window size only and not its position.

A/P and HSI override:

This should fix the issue with some aircraft (Carenado, etc...) where the GTN was not able to connect to the A/P and the HSI when initially loaded, and for which the interim fix was to unselect then reselect the GTN from the menu.

v2.5

  • New: LinkObs connects GPS to OBS source, either HSI (with LinkHsi) or VOR (AutoNavSource).
  • New: Autopilot coupling and tracking compatible with host simulator simulation rate (up to 128x).
  • Fixed: missing LPV procedures bug introduced in previous version.

v2.4.16

  • New: Popup Windows compatible with the latest XP11.20+ VR.
  • New: SHIFT+RIGHT Click the GPS top edge opens the GUI Settings (like FltSim version).
  • New: SHIFT+LEFT Click the GPS top edge resizes the popup window (like FltSim version).
  • New: Added 'Master Device' setting to the GUI Settings (like FltSim version).
  • Fixed: GPS Master Device state not saved to the settings file (take 2).
  • Enhanced: User's Manual renamed to: "Reality XP GTN User's Manual (XPlane).pdf".
  • Enhanced: Installer cleans up older manual and shortcuts left from previous installations.
  • Enhanced: User's Manual corrections and additional information.
  • Enhanced: Further stability and performance enhancements.

About LinkObs:

With the previous versions, the option used to only connect the HSI OBS to the GPS. 

New in v2.5, when using the LinkObs option, the OBS source is either the HSI OBS when the GPS device is connected to the HSI (LinkHsi option), or the VOR1/2  OBS when the GPS device is connected to the VOR (in this case VOR1 or VOR2 depends on the AutoNavSource setting).

v2.4.15

  •     New: "Audio With Window Focus" option mutes device sound when simulator window is not active.
  •     New: Preliminary VR Popup Windows support (XP11.20+).
  •     Fixed: GPS Master Device state not saved to the settings file.
  •     Enhanced: RealityXP.GTN.ini file management permits manual edits while loaded.
  •     Enhanced: User's Manual corrections and additional information.
  •     Enhanced: Further stability and performance enhancements.

v2.4.14

  •     New: Drag and Drop ini files onto the panel window to import another aircraft settings.
  •     Fixed: Using GTN Trainer alternate paths override with environment variables.
  •     Enhanced: TCAD Targets detection and filtering.
  •     Enhanced: User's Manual corrections and additional information.
  •     Enhanced: Further stability and performance enhancements.

v2.4.13

  •     New: Added support for the latest GTN Trainer v6.41.1
  •     Enhanced: Using Ryan 9900BX TCAD with 3rd party AI traffic scans all available MP datarefs.
  •     Enhanced: Option to limit number of AI traffic to actual X-Plane count (as in previous versions).
  •     Enhanced: Further stability and performance enhancements.

 v2.4.12

  •     New: XPlane 11.1 Popout Windows.
  •     Fixed: Shadin Air Data Computer (Air Temperatures).
  •     Fixed: Map Wind Vector Speed and Direction.
  •     Fixed: Simulator locked to GPS when using radios-less devices (625,635,725).
  •     Other: Preliminary Internal Support for Reality XP G600/500.

v2.4.11

  •     Fixed: GTN Trainer 6.21 not powering up (bug introduced in 2.4.10).

v2.4.10

  •     New: IDENT mode: overrides NAV1/2 audio panel if active (compatible with GTN+GNS V2 on the same panel)
  •     New: IDENT mode: audio panel NAV1/2 selection remain available while IDENT mode is active
  •     Added: Piper PA-28 Arrow III Checklists in the sample pack (credit Bourrinopathe).
  •     Fixed: Transponder switching to 1200 during takeoff.
  •     Fixed: Flight Plan import bug introduced in the previous version.
  •     Fixed: Avionics bus / battery bus problem introduced in the last update.
  •     Fixed: GTN Trainer process stuck during boot (aka black screen problem).
  •     Enhanced: Further stability and performance enhancements.

v2.4.9

  •     Enhanced: Reduced video card memory usage by 50%.
  •     Enhanced: Using Ryan 9900BX TCAD instead of 9900B.
  •     Enhanced: Preliminary changes for X-Plane 11.1.
  •     Enhanced: Further performance and stability enhancement.
  •     Fixed: Black screen issue experienced on few systems.
  •     Fixed: Corrupted graphics when using Intel Video card.

v2.4.8

  •     New: Added support for the latest GTN Trainer v6.41.
  •     New: Added GTN 625, GTN 635 and GTN 735 devices.
  •     Enhanced: Further performance and stability enhancement.

v2.4.6

  •     New: support for mouse click-spots in 3D and 2D panels.
  •     New: Using xSquawkBox SDK to drive RX/TX flags.
  •     New: 3 Additional commands (discrete inputs): 'CDI_SOURCE', 'OBS_MODE' and 'TAWS_INHIBIT'.
  •     New: 2 Additional datarefs for the master device: DTK and XTK.
  •     New: 2 New RealityXP.GTN.ini file settings.
  •     New: 1 New settings: 'PowerSource'
  •     New: 1 New settings: 'PANELS', supports both 3D and 2D panels at once.
  •     Enhanced: Massive performance gains (YMMV).
  •     Enhanced: revisited 'panel instruments links', with support for mixing GNS and GTN devices (GPS datarefs, HSI datarefs, NAV datarefs and related instruments).
  •     Enhanced: TCAS missing targets corrected.
  •     Enhanced: bug when rebooting the device.
  •     Enhanced: bug with HSI needle not rotating to DTK during POST.
  •     Enhanced: Further performance and stability enhancement.

v2.4

  •     New: Configuration Panel GUI.
  •     New: Import flight plans (Garmin .gfp format).
  •     New: Import user waypoints.
  •     New: Per-aircraft checklists (Garmin .ace format).
  •     New: Use stock X-Plane GPS buttons and knobs.
  •     Enhanced: User's manual new sections and corrections.
  •     Enhanced: Bug corrections and stability enhancements.

v2.3

  •     New: Officially released for XP11.
  •     New: Compatible with the latest Garmin GTN Trainer 6.21.
  •     New: GPS satellite reception failure (waas/no-waas/failed).
  •     New: Failures for COM, NAV, XPDR and Audio Panel independently.
  •     New: Screen brightness light source setting.
  •     New: Keys brightness (integral lighting) source setting.
  •     Enhanced: TCAD ghost threats eliminated.
  •     Changed: this version only supports Garmin GTN trainer v6.21 and v.6.1.1.

v2.2.4

  •     Enhanced: Autopilot navigation tracking is more accurate.
  •     Enhanced: TCAD target threat level revisited.

v2.2.3

  •     New: Radios support both 25hz and 8.33hz COM spacing.
  •     Bug: acquiring GPS when flying in the south hemisphere.

*8.33Hz COM spacing requires XP10.

v2.2.2

  •     New: GTN 750 displays navigation charts! (where available).
  •     New: GTN Audio Panel synchronizes fully with X-Plane audio panel.
  •     New: GTN Controls X-Plane COM and NAV volume.
  •     New: GTN COM TX/RX flags now supports the latest PilotEdge datarefs.
  •     New: GTN Wind Vector map user field is now functional.
  •     New: GTNDBFILE environment variable to select alternate database file.
  •     Enhanced Ryan 9900BX TCAD to be less prone to spurious traffic alerts.

v2.2.1

  •     Correct bug on Windows 10.

v2.2.0

  •     Added support for X-Plane 10 64-bits.
  •     Added Ryan 9900BX TCAD.

v2.1.0

  • public release.

 

Edited by RXP
  • Like 9
  • Upvote 2

Jean-Luc | reality-xp.com
This message from Reality XP is protected by a disclaimer: reality-xp.com/aboutrealityxp/email.html

Let your voice be heard and help us make a difference for you: Vote !
Open up communications with Reality-XP (Microsoft Flight Simulator Forums)

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...