How to get Bezel popup separate?

[ryanbatc 12,854]

I'm using the Carenado B350i panel mod (originally uses F1's unit)

The way the mod is done is to just use 1 instance of the gtn I guess.  I'll show the panel cfg

At the moment when I click the popup it opens a no bezel GTN... which makes sense, it's opening the one used in the VC MFD.  How can I open an instance WITH the bezel?

Here's my rxp ini as well: https://www.dropbox.com/s/txien4of7yanho8/RealityXP.GTN.ini?dl=0

[Window01]
Background_color=0,0,0
size_mm=937,887
ident=14401
position=8
window_size= 0.340, 0.600
zorder=99
gauge00=rxpGTN!GTN_750_1, 0, 0,937,887
 

[Vcockpit01]
Background_color=0,0,0 
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panel_1

gauge00=CARPROLINE21_B350i!Proline_GTN_Config,  0,0,10,10
gauge01=CARPROLINE21_B350I!Proline_Common_Update,  0,0,10,10
gauge02=CARPROLINE21_B350I!Proline_C_Patch,  0,0,10,10
gauge03=CARPROLINE21_B350i!GTN_PFD,     0, 0, 512, 636
gauge04=rxpGTN!GTN_750_1,582,170,382,480
gauge05=EFIS850XP_B350I!EFIS_VC,                   0,634, 382, 358
gauge06=B350ICAR!ToggleCARPFD,               64,    0, 382,  64
gauge07=B350iCustom!ToggleCARMFD,              576, 0, 484,  64
gauge08=B350I_Cabin_alt!C340_PRESS,  0,0,1,1
gauge09=CarSoundB350I!CarSound,  0,0,5,5
gauge10=CarSound_B350ICALL!CarSound,                       2,2,5,5
gauge11=CARB350I_PROLINE21!PROLINE21,                       0,0,1,1
gauge12=CARPROLINE21_B350i!GTN_MFD_Engine_Instruments,     512, 0, 512, 676
gauge13=B350ICAR!Toggle213,  542, 65, 432, 100
gauge14=B350iCustom!ToggleCARMFD,              512, 300, 64,  360

needbezel by ryan b, on Flickr

[RXP 2,338]

5 hours ago, ryanbatcund said:

[Window01]
gauge00=rxpGTN!GTN_750_1, 0, 0,937,887

 

5 hours ago, ryanbatcund said:

[Vcockpit01]
gauge04=rxpGTN!GTN_750_1,582,170,382,480

RealityXP.GTN.ini file

[GTN_750_1.DEFAULT]
; show screen only gauge if true.
nobezel = true

 

Hi Ryan,

Each GTN gauge instance in the panel.cfg file share the same 'rendering' options unless specified otherwise. In this case, the rendering options are in [GTN_750_1.DEFAULT]

1) Just copy/paste the [GTN_750_1.DEFAULT] section twice, and rename each for example like this: [GTN_750_1.POPUP] and [GTN_750_1.VC].

2) Tell each gauge instance what rendering section to use with the 5th parameter:

 [Window01]
gauge00=rxpGTN!GTN_750_1, 0, 0,937,887,POPUP

[Vcockpit01]
gauge04=rxpGTN!GTN_750_1,582,170,382,480,VC

3) Adjust each instance settings!

[ryanbatc 12,854]

Ahhh, the names go at the END of the gauge lines.... lol

Thanks so much - was bugging me for a while... user error!

And updating the gauges did seem to help with the CDI sync etc.