Jump to content

Sign in to follow this  
IanHarrison

Resetting Windows10

Recommended Posts

Due to unknown causes, possibly Windows updates (but not necessarily), I am having major boot issues.

My PC takes 3 or 4 attempts to boot, going through the Windows reset  and diagnose procedure each time until it finally boots if I am lucky.

My query is, I have my P3D v4 on a separate SSD and backed up. If I reset Windows, it will delete all my programs. Do I have to re-install

all P3D programs to get the OS to recognise them or will P3D still run from its own partition?

I fear the answer is not what I want to hear!!

Ian Harrison

 


Intel i7 6700K @4.3. 32gb Gskill 3200 RAM. Z170x Gigabyte m/b. 28" LG HD monitor. Win 10 Home. 500g Samsung 960 as P3D home. GTX 1080 8gb.

Share this post


Link to post
Share on other sites

First try rolling back to the previous Windows 10 version.

Hold the shift key down when you select Start, Shut Down or Sign Out, Restart.  Your system will start the restart process and then give you options.  Select Reset. then Advanced Options, and one of the options will be to roll back to the Previous Version (before the most recent updates).  That will not cost you any of your data.

I just had to do this this morning.  Windows 10 feature update late yesterday rendered my Chrome almost unusable.  I could not reach any secure sites with Chrome.  Could reach all of them with Edge!

Also, just found this for you to look into...

http://www.ktvn.com/story/38152918/patch-for-april-2018-update-sends-windows-10-into-infinite-boot-loop

Edited by fppilot
  • Upvote 1

Frank Patton
MSI Z490 WiFi MOB;  i7 10700k Comet Lake 3.8 Ghz CPU; Ripjaws 32 gb DDR4 3600; ASUS GTX 1070 TI Turbo 8GB; MasterCase H500M; Corsair H100i Pro cooler; Corsair RMX850X PSU; ASUS VG289 4K 27"; Honeycomb Alpha Yoke A+.  Former USAF meteorologist & ground weather school instructor; AOPA Member #07379126 
                        There is no limit to what a man can do or where he can go if he doesn’t mind who gets the credit! - Benjamin Jowett

 

Share this post


Link to post
Share on other sites

You may want to check all your driver installs? AFAIK Win 10 upgrades tend to re-install a lot of drivers, and sometimes, it wont re-install what you already had on there but just install Win 10 default drivers instead. 

You might just need to re-install a certain driver and it should start working normally again. 


AMD Ryzen 3900X - Asus Crosshair VI Hero - G.Skill 32GB (2x16GB) 3000 C14 DDR4 @ 3600 C16

AMD Radeon VII 16GB HBM2 @ 1950/1150 1135mv  - 3 x Iiyama G-Master GB2888UHSU 4k @ 7680x1440

Saitek X-55 Rhino - Track IR5 - Obutto Sim Cockpit + Triple Monitor Stand - Fancy some Techno? https://www.mixcloud.com/dj_bully/

Share this post


Link to post
Share on other sites

I've been having the same problems with my pc consistently restarting after the latest update. I gave in and sent my pc back to the guy who originally built it for me. He reinstalled windows which did solve the restarting problem. Like yourself, i have P3D installed on a separate drive. I finally got my pc back today and was happy to see all of my P3D stuff was still in place on the other drive. But unfortunately, nothing would run, not even simple programs like navigraph charts cloud or even TOPCAT. So I've spent the day uninstalling and then reinstalling everything. I'm guessing it would be a licensing issue.     


James Gill

 

 

Share this post


Link to post
Share on other sites

Windows 10 Reset has two options, you can reset with all programs or wipe out all programs.  You should google this feature and read what Microsoft has to offer.  I reset my PC last year.... you effectively wipe out everything in the registry and start with a clean empty registry, so programs that may still exist in a SSD or HDD may not work because the registry does not show them installed.


Dan Downs KCRP

Share this post


Link to post
Share on other sites

IMHO, if you reinstall/reset Windows, the only way to get an uncompromised configuration ( IOW without a whole bunch of question marks as to which add-ons will work or not) is to rebuild completely from the OS on up.

If you do decide to rebuild Rome, make sure to uninstall P3D using the Control Panel -> Programs and Features entry *before* Windows reinstallation so that your P3D license activation is restored on the LM server.  Otherwise, you may have a several day wait working with LM to get your P3D activation working again.  The same is also advisable for any other software with built-in deactivation features, like some PMDG planes, FSDreamteam sceneries etc.

Regards

 


Bob Scott | AVSIM Forums Administrator | AVSIM Board of Directors

ATP Gulfstream II-III-IV-V

System: i9-10900K @ 5.2GHz on custom water loop, ASUS Maximus XII Hero, 32GB GSkill 3600MHz CAS15, eVGA 2080Ti XC Ultra, Samsung 55" JS8500 4K TV@30Hz, 5xSamsung SSD, eVGA 1KW PSU, 1Gbps internet

SB XFi Titanium, optical link to Yamaha RX-V467, Polk/Klipsch 6" bookshelf spkrs, Polk 12" subwoofer, 12.9" iPad Pro, PFC yoke/throttle quad/pedals with custom Hall sensors, Coolermaster HAF932 case, Stream Deck XL button box

Share this post


Link to post
Share on other sites

Like I said above, before anything else, roll Windows 10 back to the previous version.  Its easy. If it works it saves a ton of frustration.  I just did it this morning for a different reason! There are instructions all over the web about this recent issue and overcoming it!  


Frank Patton
MSI Z490 WiFi MOB;  i7 10700k Comet Lake 3.8 Ghz CPU; Ripjaws 32 gb DDR4 3600; ASUS GTX 1070 TI Turbo 8GB; MasterCase H500M; Corsair H100i Pro cooler; Corsair RMX850X PSU; ASUS VG289 4K 27"; Honeycomb Alpha Yoke A+.  Former USAF meteorologist & ground weather school instructor; AOPA Member #07379126 
                        There is no limit to what a man can do or where he can go if he doesn’t mind who gets the credit! - Benjamin Jowett

 

Share this post


Link to post
Share on other sites

Lots of parts of the program are contained in folders outside the program install (IE users and programdata  appdata) as well as the registry settings so it would require a full reinstall

 


Steve McNitt

Share this post


Link to post
Share on other sites

He obviously can connect with another device so I trust he is using that capability to further research the alternatives available to him. There is much out there about this issue since mid-late April, and how to resolve it.


Frank Patton
MSI Z490 WiFi MOB;  i7 10700k Comet Lake 3.8 Ghz CPU; Ripjaws 32 gb DDR4 3600; ASUS GTX 1070 TI Turbo 8GB; MasterCase H500M; Corsair H100i Pro cooler; Corsair RMX850X PSU; ASUS VG289 4K 27"; Honeycomb Alpha Yoke A+.  Former USAF meteorologist & ground weather school instructor; AOPA Member #07379126 
                        There is no limit to what a man can do or where he can go if he doesn’t mind who gets the credit! - Benjamin Jowett

 

Share this post


Link to post
Share on other sites

Hi

Latest Win 10 updates seems to be causing problems 

Most of the updates installed on my machine but two did not

Tried a couple of times but did a restart as Win 10 appeared to go into a resting state!

One restart was a forced one ie switching computer off and then  on again 

Each time Win 10 told me the 2 updates that had not installed and rolled itself back to the previous version of Win10 with no instructions from me-impressive!

All this did take time but I let the computer/Win 10 work away at its own speed with minimal interference from me

Sounds like there were a couple of dud updates from Microsoft 

I will not allow updates for a few weeks then may be by then they will have fixed it

Notification of a new set of updates with hopefully a “cure” included might be the clue to attempt Updates again

Meanwhile I can keep flying!

Just my thoughts

xxd09

 

Share this post


Link to post
Share on other sites

Hi,

I must say how much I am admiring the seemingly infinite patience and vitriolic restraint being demonstrated by Windows 10 users when, quite clearly, updating this operating system successfully without risking breaking something else is akin to participating in a lottery with no guaranteed good outcome. How many hours have been wasted globally by this repeated nonsense, I wonder, and how many of you are starting to dread the appearance of each update? Seems to me that Microsoft are long overdue a wake-up call and/or a hefty kick up the backside.

For some time now operating systems have reached a level of maturity, along with knowledge and programming expertise, to ensure such events do not occur. No cumulative update should be out on general release until Developers (3rd Party) have had sufficient opportunity to check it against the performance and stability of their products. Microsoft needs to build safeguards into Windows 10 to protect the end user from these unnecessary and time-wasting hassles.

Mike


My rig: ASUS ROG Rampage V Extreme, i7-5960X (Dynamic OC 4.6 GHz - all cores, HT=ON, AM=21845), Corsair Hydro Series H110i GT Cooler with 2xNoctua NF-A14 PWM 140mm fans, G.SKILL Ripjaws 4 series 16GB (4 x 4GB) DDR4 3000, ASUS GTX 1080Ti ROG STRIX 11GB, GDDR5X (Driver versions: 441.66 (Win7), 452.06 (Win10)), Samsung 850 EVO 1TB SSD x4, Samsung 970 EVO 2TB V-NAND M.2, LG BH16NS40 16x SATA Internal BDRW, EVGA 1200 P2 Watt PSU, Cooler Master HAF X, ASUS ROG Swift PG278Q (G-Sync) monitor at 120Hz. Oculus Rift. Dual Boot: Windows 10 Pro 64bit (2004) / Prepar3D v5.0.31.35253, Windows 7 Pro 64bit / Prepar3D v4.5.12.30293.

Share this post


Link to post
Share on other sites
1 hour ago, Cruachan said:

Hi,

I must say how much I am admiring the seemingly infinite patience and vitriolic restraint being demonstrated by Windows 10 users when, quite clearly, updating this operating system successfully without risking breaking something else is akin to participating in a lottery with no guaranteed good outcome. How many hours have been wasted globally by this repeated nonsense, I wonder, and how many of you are starting to dread the appearance of each update? Seems to me that Microsoft are long overdue a wake-up call and/or a hefty kick up the backside.

For some time now operating systems have reached a level of maturity, along with knowledge and programming expertise, to ensure such events do not occur. No cumulative update should be out on general release until Developers (3rd Party) have had sufficient opportunity to check it against the performance and stability of their products. Microsoft needs to build safeguards into Windows 10 to protect the end user from these unnecessary and time-wasting hassles.

Mike

Mike, I can honestly say I've never had a problem with Win10 - unless you count having to reinstall the Majestic Q400 once after a major update....   Not all reported issues are global, if you catch my drift 😛

  • Upvote 1

Kevin Firth - i9 10850K @5.2; Asus Maximus XII Hero; 32Gb Cas14 3200 DDR4; RTX2080Ti

Beta tester for: UK2000; JustFlight; VoxATC; FSReborn; //42

Share this post


Link to post
Share on other sites
43 minutes ago, kevinfirth said:

Mike, I can honestly say I've never had a problem with Win10 - unless you count having to reinstall the Majestic Q400 once after a major update....   Not all reported issues are global, if you catch my drift 😛

Hi Kevin,

That’s good and doubtless there are many who are sharing your experience. I too have enjoyed a stress free experience and I’m still on Windows 7 - there, I’ve said it 😀. Nevertheless there appear to be significant numbers falling foul of these Win 10 updates and reporting their travails as they seek to resolve their post update issues. While accepting that many variables are likely to be at play, I’m assuming, but cannot prove, that very few instances can be attributed solely to user incompetence or ill-informed meddling with designed normal operating system behaviour.

Regards,

Mike


My rig: ASUS ROG Rampage V Extreme, i7-5960X (Dynamic OC 4.6 GHz - all cores, HT=ON, AM=21845), Corsair Hydro Series H110i GT Cooler with 2xNoctua NF-A14 PWM 140mm fans, G.SKILL Ripjaws 4 series 16GB (4 x 4GB) DDR4 3000, ASUS GTX 1080Ti ROG STRIX 11GB, GDDR5X (Driver versions: 441.66 (Win7), 452.06 (Win10)), Samsung 850 EVO 1TB SSD x4, Samsung 970 EVO 2TB V-NAND M.2, LG BH16NS40 16x SATA Internal BDRW, EVGA 1200 P2 Watt PSU, Cooler Master HAF X, ASUS ROG Swift PG278Q (G-Sync) monitor at 120Hz. Oculus Rift. Dual Boot: Windows 10 Pro 64bit (2004) / Prepar3D v5.0.31.35253, Windows 7 Pro 64bit / Prepar3D v4.5.12.30293.

Share this post


Link to post
Share on other sites

Before doing roll backs etc. untick 'turn off fast startup' in power options under control panel (click on choose what the power button should do). I had the same problem that you are having and this solved it.


Michael A. Jones

signature-light.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    31%
    $7,860.00 of $25,000.00 Donate Now
×
×
  • Create New...