resolved GNS 530W for V35B Bonanza

[Bert Pieke 7,584]

Why don't you make the changes I suggested in the very beginning?

Over to you 

 

[Indy511 686]

@muller23

I posted the configuration for the Duke Turbine.
Scroll to bottom of page. https://www.avsim.com/forums/topic/518703-official-panel-configuration-thread/?page=3 RealAir Duke Turbine V2 with RXP GPS 500

[frmeyer 1]

7 hours ago, Bert Pieke said:

Why don't you make the changes I suggested in the very beginning?

Over to you 

 

it did the changes,but for some reason it changes back

[Bert Pieke 7,584]

Just now, muller23 said:

it did the changes,but for some reason it changes back

If you do not use the RealAir configurator, or RXP configurator after making the changes, the changes will stay in place..

Edited June 11, 2018 by Bert Pieke

[frmeyer 1]

ok ,Bert

http://www.mediafire.com/file/686bka6dn4z0a4w/real_air.jpg/file

this panel ,looks good ,only the power button works ,the other knobs you can move them as well ,but no function ,pop up works

gotta  Enable (Use Simulator GPS Commands) via the GNS configuration panel. (Press and hold the SHIFT key then RIGHT-Click the top edge of the GNS device to open the configuration panel).

i will report back

 

// Panel Configuration file
// RealAir Simulations Beechcraft Turbine Duke V2 2014 Update
// Panel and Gauge Programming by Sean Moloney
// Copyright (c) 2014 RealAir Simulations

// ===============================================================================
// IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN
// BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY
// EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY
// VALUE FROM 'Window03' TO 'Window 09'.
// ===============================================================================

[Window Titles]
Window00=Main Panel
Window01=RXP GPS500
Window02=Blank

[Window00]
file=2D_Help.bmp
size_mm=1024, 95
position=6
BACKGROUND_COLOR=0,0,0
visible=1
ident=MAIN_PANEL

[Window01]
position=8
window_size=0.30, 0.38
visible=1
ident=15531
gauge00=rxpGNS2!GPS_500_1, 0, 0, 100, 100,Popup_Settings
window_pos= 0.660, 0.260

[Window02]
size_mm=1,1
position=0
visible=0
ident=15600
BACKGROUND_COLOR=0,0,0
gauge00=RASDuke!Blank, 0, 0, 1, 1

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$RAS_Duke_CFG
background_color=1,1,1

gauge01=Config!Options, 1020, 1023, 1, 1
gauge02=Config!RealView, 1021, 1023, 1, 1
gauge03=Config!RadioLayout, 1027, 1023, 1, 1

gauge04=RASDuke!InitVars, 1022, 1023, 1, 1
gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1
gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1
gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1

gauge08=RASDuke!NavCom1, 1, 2, 509, 61
gauge09=RASDuke!NavCom2, 1, 64, 509, 61
gauge10=RASDuke!ADF, 4, 127, 332, 49
gauge11=RASDuke!Xpndr, 7, 243, 305, 57
gauge12=RASDuke!Autopilot, 5, 177, 292, 62
gauge13=RASDuke!DME, 4, 305, 256, 46
gauge14=RASDuke!KA285_Annun, 512,2,337,108
gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245
gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259
gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86
gauge18=RASDuke!Master_Warn, 893, 1, 130, 129

// ===============================================================================
// IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN
// BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE
// IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY
// CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22'
// ===============================================================================

gauge19=rxpGNS2!GPS_500_1, 40, 650, 370, 274,VC_settings
gauge20=RASDuke!Blank, 0, 0, 1, 1

gauge21=RASDukeTv2_Sound!Sound, 1,1,2,2, \Sound\RASDukeTv2_Sound.ini
gauge22=RASDuke!Sound_Manager, 1,1,3,3

gauge23=RASDuke!Pressurisation, 1024, 1023, 1, 1
gauge24=Config!ModelOptions, 1020, 1023, 1, 1
gauge25=Config!GNS500BUTTONS, 0, 0, 1, 1

Day=255,255,255
Night=225,117,89
Luminous=200,200,101

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

Edited June 12, 2018 by muller23

[Bert Pieke 7,584]

Correct:

[GPS_500_1]
; is the master device if true.
MasterDevice = true
......
; uses Simulator GPS commands if true.
UseSimGpsCmds = true

[Bert Pieke 7,584]

And the GNS500 Buttons xml file should look like this:

<Gauge Name="GPS 500 buttons" Version="1.0">

<!-- Trigger GPS 500 commands -->
   
<Element>
     <Select>
      <Value>

   (L:mdlZoomOutButton,bool) if{
   0 (>K:GPS_ZOOMOUT_BUTTON)
   0 (>L:mdlZoomOutButton,bool) }

   (L:mdlZoomInButton,bool) if{
   0 (>K:GPS_ZOOMIN_BUTTON)
   0 (>L:mdlZoomInButton,bool) }

   (L:mdlDTOButton,bool) if{
   0 (>K:GPS_DIRECTTO_BUTTON)
   0 (>L:mdlDTOButton,bool) }

   (L:mdlNrstButton,bool) if{
   0 (>K:GPS_NEAREST_BUTTON)
   0 (>L:mdlNrstButton,bool) }

   (L:mdlEntButton,bool) if{
   0 (>K:GPS_ENTER_BUTTON)
   0 (>L:mdlEntButton,bool) }

   (L:mdlClrButLSingle,bool) if{
   0 (>K:GPS_CLEAR_BUTTON_DOWN)
   0 (>L:mdlClrButLSingle,bool) }
 
   (L:mdlClrButLeave,bool) if{
   0 (>K:GPS_CLEAR_BUTTON_UP)
   0 (>L:mdlClrButLeave,bool) }
   
   (L:mdlMSGButton,bool) if{
   0 (>K:GPS_MSG_BUTTON)
   0 (>L:mdlMSGButton,bool) }

   (L:mdlBottomLeftKnob,bool) if{
   0 (>K:GPS_PAGE_KNOB_DEC)
   0 (>L:mdlBottomLeftKnob,bool) }

   (L:mdlBottomRightKnob,bool) if{
   0 (>K:GPS_PAGE_KNOB_INC)
   0 (>L:mdlBottomRightKnob,bool) }

   (L:mdlTopLeftKnob,bool) if{
   0 (>K:GPS_GROUP_KNOB_DEC)
   0 (>L:mdlTopLeftKnob,bool) }

   (L:mdlTopRightKnob,bool) if{
   0 (>K:GPS_GROUP_KNOB_INC)
   0 (>L:mdlTopRightKnob,bool)  }

   (L:mdlFPLButton,bool) if{
   0 (>K:GPS_FLIGHTPLAN_BUTTON)
   0 (>L:mdlFPLButton,bool) }

   (L:mdlPROCButton,bool) if{
   0 (>K:GPS_PROCEDURE_BUTTON)
   0 (>L:mdlPROCButton,bool) }

   (L:mdlOBSButton,bool) if{
   0 (>K:GPS_OBS_BUTTON)
   0 (>L:mdlOBSButton,bool) }

   (L:mdlMenuButton,bool) if{
   0 (>K:GPS_MENU_BUTTON)
   0 (>L:mdlMenuButton,bool) }
       
      </Value>      
     </Select>
   </Element>
</Gauge>

 

[frmeyer 1]

 

ok

got xml.file

they are all moving buttons now,problem is now to get the function in there

Enable (Use Simulator GPS Commands) via the GNS configuration panel. (Press and hold the SHIFT key then RIGHT-Click the top edge of the GNS device to open the configuration panel)

that doesn't work here,because when I hold shift and click the mouse right the p3d panel comes up not the GNS  configuration panel

Edited June 12, 2018 by muller23

[Bert Pieke 7,584]

Just now, muller23 said:

 

ok

got xml.file

they are all moving buttons now,problem is now to get the function in there

Enable (Use Simulator GPS Commands) via the GNS configuration panel. (Press and hold the SHIFT key then RIGHT-Click the top edge of the GNS device to open the configuration panel)

that doesn't work here,because when I hold shift and click the mouse right the p3d panel comes up not the GNS  configuration panel

In the ini file:

[GPS_500_1]
.....
; uses Simulator GPS commands if true.
UseSimGpsCmds = true

[frmeyer 1]

16 minutes ago, Bert Pieke said:

In the ini file:

[GPS_500_1]
.....
; uses Simulator GPS commands if true.
UseSimGpsCmds = true

works very nice Bert,thank you very much

I saved  all the backup files for the g500

now I will try to install GNS 530 only ,without the g500

[Bert Pieke 7,584]

Just now, muller23 said:

works very nice Bert,thank you very much

I saved  all the backup files for the g500

now I will try to install GNS 530 only ,without the g500

Why?  It does not fit in the panel..

[frmeyer 1]

yes,very nice,is all there

I thought gns 530 is better for the duke

thanks

[frmeyer 1]

I just tried it out ,if I go to config panel p3d add-on and config the GNS 530,it looks like this 

http://www.mediafire.com/file/6w95pb823djiw6s/fits_in.jpg/file

and of course,only the pop up works

 

the GNS500 it looks like this,very nice and working all the buttons

http://www.mediafire.com/file/686bka6dn4z0a4w/real_air.jpg/file

 

[Bert Pieke 7,584]

I have tried to make the GNS530 fit, but not been successful..

[frmeyer 1]

1 minute ago, Bert Pieke said:

I have tried to make the GNS530 fit, but not been successful..

ah well ,at least gns500 works now  thanks