FSL A320X v2.0.1.258

[Petermuc3 8]

Yes I have tried that on 2 computers. I use windows extract but I do not even get the extract option

when right-clicking. Never had a problem before with this. Did you try to extract the file?

[FS++ 708]

45 minutes ago, Petermuc3 said:

Yes I have tried that on 2 computers. I use windows extract but I do not even get the extract option

when right-clicking. Never had a problem before with this. Did you try to extract the file?

Have just uploaded new zip file with a different name

click Download link

 

[Petermuc3 8]

Thanks Gerald,

I was able to extract that one.

Peter

[FS++ 708]

42 minutes ago, Petermuc3 said:

Thanks Gerald,

I was able to extract that one.

Peter

OK, let us know if FSL A320 or A319 require any attention.

[Petermuc3 8]

I only made a short test on the ground. I reinstalled the newest A320X on a different

volume as I ran out of space on my systemdisk.

F/O is not able to handle

heading/v/s

weather radar

engine IGN/Start switch

Thanks for the help

Peter

[sbs9 40]

Other commands not working:

• t cas alt range above/below (sets alt rptg to off instead)
• disarm spoilers.

Thank you,

Roman

[FS++ 708]

On ‎7‎/‎8‎/‎2018 at 11:21 PM, sbs9 said:

Other commands not working:

• t cas alt range above/below (sets alt rptg to off instead)
• disarm spoilers.

Thank you,

Roman

Unzip this file then replace "mcfslA3X.dll in \Prepar3D v4\MCE dlls\ folder.

Issues fixed.

Also added ability to control Radio 1 (captain's radio set) Nav1, Nav2, Marker, Adf1 and Adf2 buttons for the purpose of identification. I mean using these commands that are already available for other aircraft.

Identify nav one

listen to markers

Identify adf one

stop ident nav one

stop listening to markers.

etc....

 

[FS++ 708]

On ‎7‎/‎6‎/‎2018 at 2:47 PM, Petermuc3 said:

I only made a short test on the ground. I reinstalled the newest A320X on a different

volume as I ran out of space on my systemdisk.

F/O is not able to handle

heading/v/s

weather radar

engine IGN/Start switch

Thanks for the help

Peter

Issues fixed using this replacement dll

HDG and VS working here.

Perhaps Roman (sbs9) can confirm.

 

[sbs9 40]

Thank you, Gerald, outstanding support as always!

PNF is now able to perform the whole after landing flow, outstanding! Well, there is one thing I must still do myself - switching off PWS 🙂

I prefer to do critical things myself, thus I use FCUsupport=0 parameter. Maybe I can allow Will to bother with FCU the next flight, we'll see 😉

Roman

[Petermuc3 8]

Thanks Gerald, is working fine here also. Heading/V/S sometimes yes sometimes no, but that

might be my setup. For the time beiing I am only flying the A320X. Funny thing is that the F/O behaves

different using IAE or CFM model. In my "runway entry procedure" I have "landing lights on", F/O does

that without a problem in the IAE variant, in the CFM she/he moans "not a robot..." and does not turn the

landing lights on.

Peter

[FS++ 708]

22 minutes ago, Petermuc3 said:

Thanks Gerald, is working fine here also. Heading/V/S sometimes yes sometimes no, but that

might be my setup. For the time beiing I am only flying the A320X. Funny thing is that the F/O behaves

different using IAE or CFM model. In my "runway entry procedure" I have "landing lights on", F/O does

that without a problem in the IAE variant, in the CFM she/he moans "not a robot..." and does not turn the

landing lights on.

Peter

In case the flow for CFM is damaged with some invisible character, suggest the following...

Go to \My Documents\Multi Crew Experience\Myvoicescripts\Copilot\Aircraft\FSLabs A320 IAE folder

Copy the flow "runway entry procedure", then paste it to \My Documents\Multi Crew Experience\Myvoicescripts\Copilot\Aircraft\FSLabs A320 CFM, overwriting existing one.

If editing flows directly, be advised only "Windows Notepad" application that ships with all Windows versions should be used.

We have come across issues caused by some users relying on Notepad++, which inserts some invisible characters that cause MCE not to see the end of lines or things like that. Same for editing checklists.

[Petermuc3 8]

Thanks Gerald,

I tried it but no success.

Peter

[Petermuc3 8]

The A319X seems to be a complete different aircraft. Unfortunately the F/O can only handle

a few things; no Overhead, no FCU, not weather radar, flaps yes but wrong, ground cannot open/close doors.

Peter

 

 

[FS++ 708]

17 minutes ago, Petermuc3 said:

The A319X seems to be a complete different aircraft. Unfortunately the F/O can only handle

a few things; no Overhead, no FCU, not weather radar, flaps yes but wrong, ground cannot open/close doors.

Peter

 

 

Maybe MCE not identifying it properly.

Open "aircraft.cfg" for A319 and report whatever names have been assigned in those fields

[fltsim.0]

sim=what_text_do_you_read_here

ui_createdby=what_text_do_you_read_here

ui_manufacturer=what_text_do_you_read_here

Thanks

[Petermuc3 8]

sim = A319

ui_createdby= Flight Sim Labs

ui_manufacturer=Airbus

Peter