Jump to content
Sign in to follow this  
chudoba_design

Krabi International Airport (VTSG) P3Dv4 - scenery announcement!

Recommended Posts

On 8/12/2018 at 6:19 PM, offroad said:

You can try the P3Dv4 port I made from Tic’s VTCC. It’s in the Avsim Library. 

I did find it recently and installed it. Overall works very well! However, the ground poly doesn't seem to be showing up at all for the apron and taxiways, as well as parts of the runway where it meets with taxiway. Is this the way it was supposed to be, or is this some sort of error? I'm pretty sure I put all files where they need to go.


Benjamin van Soldt

Windows 10 64bit - i5-8600k @ 4.7GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4/5 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case

Share this post


Link to post
On 12/6/2018 at 10:46 PM, Benjamin J said:

I did find it recently and installed it. Overall works very well! However, the ground poly doesn't seem to be showing up at all for the apron and taxiways, as well as parts of the runway where it meets with taxiway. Is this the way it was supposed to be, or is this some sort of error? I'm pretty sure I put all files where they need to go.

At first, I think I facing this problem alone.

Share this post


Link to post
7 hours ago, offroad said:

Is it possible to show a picture? Maybe I can try to fix it

Off course, for me I facing with main three problems in VTCC of P3Dv4

1. The line in the apron is reflected in the night.

http://picture.in.th/id/f0dd86745f0927534d0d192adb5be070

2. When I land and vacated from the runway the taxiway line is fade out and almost invisible when we landed in dark night.

http://picture.in.th/id/747c3827e0a00c701df92ba298596169

3. unable to see airplane shadow. Although I already check out the shadow cast and receive in the setting section of P3D 

http://picture.in.th/id/c9d1bb3b877851dfc04fe2bb500991c4

if you can't see the picture or need more information about Chiang Mai international airport, Please contact me via my personal e-mail: jiradej_c@hotmail.co.th

Thank you

Share this post


Link to post

Looks like your problems are a little different from mine? See below. As you can se,e it appears the detail layer of the taxiways and aprons, including all taxiway and apron markings, is missing.

 

2018-12-9_11-34-56-611.png

2018-12-9_11-37-10-724.png

2018-12-9_11-37-22-358.png


Benjamin van Soldt

Windows 10 64bit - i5-8600k @ 4.7GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4/5 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case

Share this post


Link to post
2 hours ago, Benjamin J said:

Looks like your problems are a little different from mine? See below. As you can se,e it appears the detail layer of the taxiways and aprons, including all taxiway and apron markings, is missing.

 

2018-12-9_11-34-56-611.png

2018-12-9_11-37-10-724.png

2018-12-9_11-37-22-358.png

It looks like you need to add the VTCC2016_ADEX_TIC_ALT.bgl file to your Prepar3D v4\Scenery\World\scenery map.

Share this post


Link to post

Agh... Such a stupid mistake. Let me correct that and get back to you. I didn't think this particular problem could be related to an altitude correction! Sometimes I try to put such altitude corrections in their own, scenery-specific folder. Because I didn't see any elevation issues I just assumed that all was well.

  • Upvote 1

Benjamin van Soldt

Windows 10 64bit - i5-8600k @ 4.7GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4/5 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case

Share this post


Link to post

So guys!

I had hard times in school and I need to improve my knowledge to continue on the airport!

Finally, I got good news!

1.5a
- new textures
- optimized airport and objects
- ILS

I see that you are looking forward! That's great! Scenery will be done soon! It's much faster now with new expirience and new knowledge. 🙂

Scenery_VTSG_1.5a.png

Edited by chudoba_design

Share this post


Link to post

Looking forward to the release! Visited there a few years ago and it's definitely a unique area!

  • Like 1

/ CPU: Intel i7-9700K @4.9 / RAM: 32GB G.Skill 3200 / GPU: RTX 4080 16GB /

RW Freight Pilot

Share this post


Link to post
1 hour ago, pvupilot said:

Looking forward to the release! Visited there a few years ago and it's definitely a unique area!

It is! And it is really sad, that this scenery is only for FS2004. Everyone on Ivao is flying only to Pukhet and I want to change it! 😄

Share this post


Link to post
On 5/5/2019 at 6:06 AM, GoLFKuNG05 said:

Any good news sir?

Still working on my exams. But as soon I done all of them 22nd of May, I should be able to work again! ^^

  • Like 1

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...