Jump to content
Sign in to follow this  
austinrc

Help With Settings

Recommended Posts

My FPS is good in cruise, but gets to be in the teens during approach and landing. What P3D settings should I use? What tweaks could I make?

Computer:

    Intel Core i7 7700 @ 3.60GHz    
    Kaby Lake 14nm Technology
RAM
    24.0GB Dual-Channel Unknown @ 1196MHz 
Motherboard
    Dell Inc. 0VHXCD (U3E1)
Graphics
    S24F350 (1920x1080@59Hz)
    Intel HD Graphics 630 (Dell)
    8192MB ATI AMD Radeon RX 480 (Dell)    53 °C
    CrossFire Disabled
Storage
    931GB Western Digital WDC WD10EZEX-75WN4A0 (SATA )    39 °C
    238GB NVMe THNSN5256GPUK NV (RAID (SSD))

 

The game is installed on the SSD. 

 

Thanks for any help!

Share this post


Link to post

Get that 7700 above 4.5 for starters - 3.6 will not cut it.

 

Vic


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

Might want to look at the memory aswell, ideally you want DDR 4 @ 3200mhz or above, CAS 14 would be even idealler! 

 

My two pence 👻

Edited by djbully

AMD Ryzen 5900X - Asus Crosshair VI Hero - G.Skill 32GB (2x16GB) 3000 C14 DDR4 @ 3600 14-14-15-14-28-42

AMD Red Devil Radeon 6900XT  2700/2112 1125mv - 3 x Iiyama G-Master GB2888UHSU 4k @ 11560x2160

Saitek X-55 Rhino - Track IR5 - Obutto Sim Cockpit + Triple Monitor Stand - Fancy some Techno? https://www.mixcloud.com/dj_bully/

Share this post


Link to post

Definitely agreeing with the others - OC that i7, as it can definitely do better, and that memory seems terribly slow... Consider an upgrade. As djbully says, I have 3200 and that works very well for me, but you cna probably go for slower speeds (3000?) if money is a concern. I think Newegg might have a sale going on as we speak. Finally, I haven used AMD for P3D ever, but I remember reading posts saying that Nvidia graphics 'play nicer' with P3D than AMD? I have no idea to what AMD card a 1070 compares, but for me the 1070 was a great compromise between price and performance.


Benjamin van Soldt

Windows 10 64bit - i5-8600k @ 4.7GHz - ASRock Fatality K6 Z370 - EVGA GTX1070 SC 8GB VRAM - 16GB Corsair Vengeance LPX @ 3200MHz - Samsung 960 Evo SSD M.2 NVMe 500GB - 2x Samsung 860 Evo SSD 1TB (P3Dv4/5 drive) - Seagate Barracuda 2TB 7200RPM - Seasonic FocusPlus Gold 750W - Noctua DH-15S - Fractal Design Focus G (White) Case

Share this post


Link to post
1 hour ago, vgbaron said:

Get that 7700 above 4.5 for starters - 3.6 will not cut it.

 

Vic

Is that possible with a non-K processor?

 

Share this post


Link to post

You might be able to get to 4.2 on a non k nit not over that. If your mobo has a turbo boost opion you might try that first and see how it goes.

 

Vic


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post
On 7/27/2018 at 3:26 PM, vgbaron said:

You might be able to get to 4.2 on a non k nit not over that. If your mobo has a turbo boost opion you might try that first and see how it goes.

 

Vic

 

On 7/27/2018 at 2:08 PM, Benjamin J said:

Definitely agreeing with the others - OC that i7, as it can definitely do better, and that memory seems terribly slow... Consider an upgrade. As djbully says, I have 3200 and that works very well for me, but you cna probably go for slower speeds (3000?) if money is a concern. I think Newegg might have a sale going on as we speak. Finally, I haven used AMD for P3D ever, but I remember reading posts saying that Nvidia graphics 'play nicer' with P3D than AMD? I have no idea to what AMD card a 1070 compares, but for me the 1070 was a great compromise between price and performance.

 

On 7/27/2018 at 1:53 PM, djbully said:

Might want to look at the memory aswell, ideally you want DDR 4 @ 3200mhz or above, CAS 14 would be even idealler! 

 

My two pence 👻

I have a non-K cpu. I am looking at either buying a i7-8086K cpu that I can overclock up to 5 ghz, or upgrading to CAS 16, 4 x 8gb Memory at a 3200mhz rate. Which should be my priority?

Share this post


Link to post
15 minutes ago, austinrc said:

I have a non-K cpu. I am looking at either buying a i7-8086K cpu that I can overclock up to 5 ghz, or upgrading to CAS 16, 4 x 8gb Memory at a 3200mhz rate. Which should be my priority?

The CPU, but will an 8086K run in that Dell motherboard?

Greg

Share this post


Link to post
8 minutes ago, lownslo said:

The CPU, but will an 8086K run in that Dell motherboard?

Greg

How can I find out?

Share this post


Link to post
11 hours ago, lownslo said:

The CPU, but will an 8086K run in that Dell motherboard?

Greg

 

On 7/27/2018 at 3:26 PM, vgbaron said:

You might be able to get to 4.2 on a non k nit not over that. If your mobo has a turbo boost opion you might try that first and see how it goes.

 

Vic

 

On 7/27/2018 at 2:08 PM, Benjamin J said:

Definitely agreeing with the others - OC that i7, as it can definitely do better, and that memory seems terribly slow... Consider an upgrade. As djbully says, I have 3200 and that works very well for me, but you cna probably go for slower speeds (3000?) if money is a concern. I think Newegg might have a sale going on as we speak. Finally, I haven used AMD for P3D ever, but I remember reading posts saying that Nvidia graphics 'play nicer' with P3D than AMD? I have no idea to what AMD card a 1070 compares, but for me the 1070 was a great compromise between price and performance.

Checked task manager while in game. CPU is only running at about 30% usage, GPU at 100%. Does this mean my CPU can handle it but not my GPU?

Share this post


Link to post

No, it's not that simple.

Honestly?  Dump the Dell and start putting together a system that will work for you. Putting ANY other hardware into  Dell without knowing a bit about systems is just asking for trouble and a waste of money.

Your CPU is slow, your memory is slow, the mobo is not compatible with a decent upgrade and Nvidia video cards are still far better than AMD.

Again, adding any hardware to that system will be a waste of money. See if you can overclock it and adjust your settings and that's really about all you can do.

Vic


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post
1 hour ago, vgbaron said:

No, it's not that simple.

Honestly?  Dump the Dell and start putting together a system that will work for you. Putting ANY other hardware into  Dell without knowing a bit about systems is just asking for trouble and a waste of money.

Your CPU is slow, your memory is slow, the mobo is not compatible with a decent upgrade and Nvidia video cards are still far better than AMD.

Again, adding any hardware to that system will be a waste of money. See if you can overclock it and adjust your settings and that's really about all you can do.

Vic

Thanks for the advice. I don’t really have the time or money to ditch this system all together. I’m going to upgrade the ram to a faster set and possibly get a GTX 1080, hopefully this will give me the boost I need.

Share this post


Link to post

By itself, the ram upgrade will not be noticeable, don't waste funds. The 1080 or a 1080Ti will improve but you will still be limited unless you can kick up that CPU above 4.

Clock the CPU as is and see how your system improves, also after adjusting settings a bit. Then consider adding the 1080 if budget allows. 

Vic


 

RIG#1 - 7700K 5.0g ROG X270F 3600 15-15-15 - EVGA RTX 3090 1000W PSU 1- 850G EVO SSD, 2-256G OCZ SSD, 1TB,HAF942-H100 Water W1064Pro
40" 4K Monitor 3840x2160 - AS16, ASCA, GEP3D, UTX, Toposim, ORBX Regions, TrackIR
RIG#2 - 3770K 4.7g Asus Z77 1600 7-8-7 GTX1080ti DH14 850W 2-1TB WD HDD,1tb VRap, Armor+ W10 Pro 2 - HannsG 28" Monitors
 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...