Jump to content
Sign in to follow this  
nachezdc9

gsx config

Recommended Posts

Hi, does anybody managed to configurate gsx or gsx v2 to the S360, (including a freighter config?) I have no vehicles showing etc around the plane except for the pushback truck. Thank you. 

Share this post


Link to post

You're not alone.

Cheers, Ed


Cheers, Ed

MSFS Steam - Win10 Home x64 // Rig: Corsair Graphite 760T Full Tower - ASUS MBoard Maximus XII Hero Z490 - CPU Intel i9-10900K - 64GB RAM - MSI RTX2080 Super 8GB - [1xNVMe M.2 1TB + 1xNVMe M.2 2TB (Samsung)] + [1xSSD 1TB + 1xSSD 2TB (Crucial)] + [1xSSD 1TB (Samsung)] + 1 HDD Seagate 2TB + 1 HDD Seagate External 4TB - Monitor LG 29UC97C UWHD Curved - PSU Corsair RM1000x - VR Oculus Rift // MSFS Steam - Win 10 Home x64 - Gaming Laptop CUK ASUS Strix - CPU Intel i7-8750H - 32GB RAM - RTX2070 8GB - SSD 2TB + HDD 2TB // Thrustmaster FCS & MS XBOX Controllers

Share this post


Link to post

This is incomplete, but this is how far I've been able to get with the pax version. The baggage loader will pull up as well as the passenger bus, but I see no passengers. GSX claims there are no stairs, even though there are. I think that maybe GSX doesn't recognize the small stairs on the S360. GSX works fine on my two ATRs with their stairs.

If anyone has any suggestions, let us all know.

Lee

 

[aircraft]
nosegear = 6.71
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  2
wingrootpos = 1.13 -1.22 0.30
wingtippos = 11.28 -0.30 0.30
fuelpos = 0.00 0.00 0.00
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -2.59 1.22 -0.30
engine2pos = 2.59 1.22 -0.30
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
remove = 1

[exit2]
remove = 1

[exit3]
pos = -1.00 -4.25 -2.51 0.00
code = 0
embeddedStair = -1.75 -4.25 -2.51 -2.09 -4.25 -2.85

[exit4]
remove = 1

[service1]
remove = 1

[service2]
remove = 1

[cargo1]
remove = 1

[cargo2]
remove = 1

[cargomain]
pos = -0.75 7.75 -2.51 0.00
code = 0
embeddedStair = 0
uldcode = BELT
 


Lee H

i9 13900KF 32GB Ram 24GB RTX 4090

 

Share this post


Link to post

Update, finally got GSX working, here is the corrected GSX info. It's only 5 passengers for the moment, but maybe someone knows how to add more.

Any improvements, please let us all know!

Here is the corrected GSX config:

[aircraft]
nosegear = 6.71
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  3
wingrootpos = 1.13 -1.22 0.30
wingtippos = 11.28 -0.30 0.30
fuelpos = 0.00 0.00 0.00
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -2.59 1.22 -0.30
engine2pos = 2.59 1.22 -0.30
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
remove = 1

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
pos = -1.00 -4.25 -2.51 0.00
code = 0
embeddedStair = -1.50 -4.25 -2.51 -1.84 -4.25 -2.85

[service1]
remove = 1

[service2]
remove = 1

[cargo1]
remove = 1

[cargo2]
remove = 1

[cargomain]
pos = -0.75 7.75 -2.51 0.00
code = 0
embeddedStair = 0
uldcode = BELT

 

I edited the aircraft cfg with the following, it will only give you 5 passengers at the moment:

max_number_of_stations = 22

station_load.0 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.1 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.2 =190,  3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.3 =190,  0, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.4 =190, -3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)

station_name.0 = "captain"      
station_name.1 = "copilot"  
//station_name.0 = "pilot"      
//station_name.1 = "co pilot"   
station_name.2 = "pax 6680lbs" 
station_name.3= "fwd bag  1500lbs" 
station_name.4= "aft bag  1900lbs"


Lee H

i9 13900KF 32GB Ram 24GB RTX 4090

 

Share this post


Link to post

Okay, this tweaks it even a shade more:

 

[aircraft]
nosegear = 6.71
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  3
wingrootpos = 1.13 -1.22 0.30
wingtippos = 11.28 -0.30 0.30
fuelpos = 0.00 0.00 0.00
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -2.59 1.22 -0.30
engine2pos = 2.59 1.22 -0.30
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
remove = 1

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
pos = -1.00 -4.25 -2.51 0.00
code = 0
embeddedStair = -1.01 -4.25 -2.51 -1.82 -4.25 -3.21

[service1]
remove = 1

[service2]
remove = 1

[cargo1]
remove = 1

[cargo2]
remove = 1

[cargomain]
pos = -0.75 7.75 -2.51 0.00
code = 0
embeddedStair = 0
uldcode = BELT


 

Also, adding a few more passengers. Make a back up of your aircraft.cfg and replace this section in your aircraft.cfg:

 

[WEIGHT_AND_BALANCE]
max_gross_weight = 26553                    
empty_weight =     16900                 // (pounds)

reference_datum_position =  0, 0, 0     // (feet) distance from FlightSim Reference position: (1/4 chord, centerline, waterline)
empty_weight_CG_position =  2, 0, -5      // 1(feet) longitudinal, lateral, vertical distance from specified datum

max_number_of_stations = 22

station_load.0 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.1 =190,  1, 0,  1        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.2 =190,  3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.3 =190,  0, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.4 =190, -3, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.5 =190, -6, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.6 =190, -9, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.7 =190, -12, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.8 =190, -15, 0, -8        //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)

station_name.0 = "captain"      
station_name.1 = "copilot"  
//station_name.0 = "pilot"      
//station_name.1 = "co pilot"   
station_name.2 = "pax 6880lbs" 
station_name.3= "fwd bag  1800lbs" 
station_name.4= "aft bag  2150lbs"


Lee H

i9 13900KF 32GB Ram 24GB RTX 4090

 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...