Cannot connect to XPlane 11

[imwaite 0]

Cannot connect to xplane11. Tried many times. Reinstalled P2ATC - no difference. Very frustrating

X-Plane 11.26r2 (build 112601 64-bit)

XPUIPC Version 2.0.3.5 64 bit
XPWideFS Version 2.0.0.2 64 bit
X-Plane Version: 11260

Log file - shows tried to connect twice

Program StartedPilot 2 ATC (P2A) - version 2.5.0.5_x64_R3  10/14/2018 19:10:30
Application frmP2AMain starting 10/14/2018 19:11:00
Loading Form
Main form opened: Pilot2ATC 2018 v. 2.5.0.5_x64_R3      Navigraph - AIRAC cycle: 1811
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Loading Map Control
LoadMapControl: panel 1
Creating ucMap1
SQLiteVersion: 3.8.11.1 | 2015-07-29 20:00:57 cf538e2783e468bbc25e7cb2a9ee64d3e0e80b2f | INTEROP_CODEC INTEROP_EXTENSION_FUNCTIONS INTEROP_VIRTUAL_TABLE NET_40 PRELOAD_NATIVE_LIBRARY THROW_ON_DISPOSED TRACE TRACE_PRELOAD TRACE_SHARED TRACE_WARNING USE_PREPARE_V2 WINDOWS
ucMap1 Created
ucMap DockFill set.
Setting Map Mode
Done Loading Map Control
Loading FPL Control
FPL Control Loaded
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Joystick Device number 2 successfully activated.
Joystick Device number 0 successfully activated.
Joystick Device number 0 successfully activated.
Joystick Device number 2 successfully activated.
The SIM or FSUIPC/XPUIPC stopped functioning and P2A is Disconnected.
Error in frmP2AMain ConnectToSIM
System.ObjectDisposedException: Cannot access a disposed object.
Object name: 'Timer'.
   at System.Timers.Timer.set_Enabled(Boolean value)
   at P2A_2018.P2ASimulatorFSUIPC.Init()
   at P2A_2018.frmP2AMain.f()
Simulator Disconnected. 10/14/2018 19:17:45
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Loading Joystick Devices - 5 devices loaded.
Joystick Device number 2 successfully activated.
Joystick Device number 0 successfully activated.
Joystick Device number 0 successfully activated.
Joystick Device number 2 successfully activated.
The SIM or FSUIPC/XPUIPC stopped functioning and P2A is Disconnected.
Error in frmP2AMain ConnectToSIM
System.ObjectDisposedException: Cannot access a disposed object.
Object name: 'Timer'.
   at System.Timers.Timer.set_Enabled(Boolean value)
   at P2A_2018.P2ASimulatorFSUIPC.Init()
   at P2A_2018.frmP2AMain.f()
Application frmP2AMain ended normally 10/14/2018 19:18:36
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Object of type SlimDX.DirectInput.Joystick was not disposed. Stack trace of object creation:
Total of 8 objects still alive.
 

Edited October 14, 2018 by imwaite

[Dave-Pilot2ATC 870]

The log snippet would indicate that XPUIPC is not working correctly.  

Here is a link to a known working version of XPUIPC:

https://www.dropbox.com/s/yfanpmy2y3brzfz/XPUIPC and WPWideClient 2.0.0.0.zip?dl=0

After unzipping the downloaded zip file, copy ONLY the XPUIPC folder to the X-Plane plugins folder.

Then be sure XPUIPC is working by finding it in the X-Plane Plugins dropdown menu after starting X-Plane.

If that doesn't do it, here are some other things required to allow P2A to connect to the SIM:

1.    Make sure you are running the latest version (2.5.0.5R3 as of this writing)
2.    Be sure you are connected to the internet
3.    English-US Language installed and set as Primary Language
4.    Working Microphone installed and set as Default Sound Input device in Windows
5.    Valid Call Sign – Try using the default call sign of Mfg: Beech; Tail Number: N431VB.  Press the Save button.
6.    Try running the program in Administrator mode by right clicking on the Pilot2ATC.exe file and selecting “Run as Administrator”

Dave
 

 

[imwaite 0]

Thanks Dave, reinstalling XPUIPC worked a treat. Now fully working again. thanks.

Ian