Jump to content

Sign in to follow this  
Jack_Sawyer

FSUIPC and two different controllers

Recommended Posts

Hi, I am now using the Thrustmaster HOTAS stick, TQ6 quad, and RUDDO pedals.

But I just bought a Yoko yoke.

The stick, pedals, and throttle quad I use are all set up in FSUIPC (I admit I'm not too good with FSUIPC).

When I get the yoke next week I plan on unplugging the HOTAS stick and use the yoke.

My question is will I have to create all new profiles in FSUPIC for all my planes?  Or can FSUIPC be modified and if so how exactly?

I really have no idea what to do so any advice will be very much appreciated.

Thanks.


Jack Sawyer

Share this post


Link to post
Share on other sites

good question. I would ask why one would need to unplug one and plug in the other unless you don't have a enough USB ports and then you could get an external USB hub? That would , I think, resolve your issue with FSUIPC programming. I've been going to add a Joystick along with my yoke and have considered this. I believe as long as I use the JS for my airbuses and yoke for all else without unplugging it wouldn't be an issue..

  • Like 1

Share this post


Link to post
Share on other sites
5 minutes ago, Adrian123 said:

good question. I would ask why one would need to unplug one and plug in the other unless you don't have a enough USB ports and then you could get an external USB hub? That would , I think, resolve your issue with FSUIPC programming. I've been going to add a Joystick along with my yoke and have considered this. I believe as long as I use the JS for my airbuses and yoke for all else without unplugging it wouldn't be an issue..

Hi Adrian, I have plenty of USB ports, it's a new Jetline PC.  But not enough room on my desk.  I love the stick with all its buttons and will have a lot less so I've been getting used to my Orb Weaver.

However, it still begs the question of programming it in FSUIPC.  Will I have to make all new profiles for all the planes AND the pedals, and quadrant?  

Or can the existing ones be modified?  And if so how?

I very much appreciate you getting back to me so fast.


Jack Sawyer

Share this post


Link to post
Share on other sites

LOL. We never have enough room with our "home built Cockpits". I would believe you would need different profiles, using different controllers for the aircraft. No big deal really and FSUIPC is very powerful in that aspect and not all the difficult to do. you may be able to modify existing profiles but with different controller assignment it may be just simpler to start over. I would have to try it to see exactly how to do it. My suggestion, Just save your fsuipc.ini as a backup and start experimenting

Edited by Adrian123
  • Like 1

Share this post


Link to post
Share on other sites
1 minute ago, Adrian123 said:

LOL. We never have enough room with our "home built Cockpits". I would believe you would need different profiles, using different controllers for the aircraft. No big deal really and FSUIPC is very powerful in that aspect and not all the difficult to do. you may be able to modify existing profiles but with different controller assignment it may be just simpler to start over. I would have to try it to see exactly how to do it. My suggestion, Just save your fsuipc.ini as a backup and start experimenting

Thanks Adrian.  I do that always anyway, that ini file is always sittin right on my desktop.

That's a bummer, I was afraid to hear this as it's an incredible amount of work to do this to the whole fleet.

I wish there was a way I could plug it in and have the ini see both but only use the code in the ini for whatever one is plugged in.

:huh:


Jack Sawyer

Share this post


Link to post
Share on other sites

I may be all wet but but I find unplugging and plugging in controllers can lead to undesirable results. Basically with the OS reassigning.(They have a name for that, HID compliant controller)) Best bet is to find away to keep it active, plugged in all the time. I wish you good fortune.

  • Like 1

Share this post


Link to post
Share on other sites
4 minutes ago, Adrian123 said:

I may be all wet but but I find unplugging and plugging in controllers can lead to undesirable results. Basically with the OS reassigning.(They have a name for that, HID compliant controller)) Best bet is to find away to keep it active, plugged in all the time. I wish you good fortune.

Thanks Adrian.  Dang, now another can of worms. :blink:


Jack Sawyer

Share this post


Link to post
Share on other sites
Just now, Jack_Sawyer said:

Thanks Adrian.  Dang, now another can of worms. :blink:

It's what makes this challenging. Like a Gardners keeping his tools sharp or his hobby . 😉

 

  • Like 1

Share this post


Link to post
Share on other sites

There's a feature in FSUIPC that allows you to assign a letter, versus a number, for each controller, and that letter assignment is tied to the GUID of the device.  Doing it that way, you're not affected by the order in which Windows numbers the controllers (which can change if you're plugging and unplugging things).  It's detailed in the FSUIPC Advanced User's Guide.

Regards

 

  • Like 1
  • Upvote 1

Bob Scott | AVSIM Forums Administrator | AVSIM Board of Directors

ATP Gulfstream II-III-IV-V

System: i9-10900K @ 5.2GHz on custom water loop, ASUS Maximus XII Hero, 32GB GSkill 3600MHz CAS15, eVGA 2080Ti XC Ultra, Samsung 55" JS8500 4K TV@30Hz, 5xSamsung SSD, eVGA 1KW PSU

SB XFi Titanium, optical link to Yamaha RX-V467, Polk/Klipsch 6" bookshelf spkrs, Polk 12" subwoofer, 12.9" iPad Pro, PFC yoke/throttle quad/pedals with custom Hall sensors, Coolermaster HAF932 case, Stream Deck XL button box

Share this post


Link to post
Share on other sites
1 minute ago, w6kd said:

There's a feature in FSUIPC that allows you to assign a letter, versus a number, for each controller, and that letter assignment is tied to the GUID of the device.  Doing it that way, you're not affected by the order in which Windows numbers the controllers (which can change if you're plugging and unplugging things).  It's detailed in the FSUIPC Advanced User's Guide.

Regards

 

Thank you but I'm an extreme newbie to FSUIPC.  Can you kind of maybe walk be through it a little to give a general idea?  Screenshots maybe?

Any idea what page in the guide I'd find this?  


Jack Sawyer

Share this post


Link to post
Share on other sites

It's actually in the User Guide (not the Advanced User's Guide).  Page 21 of the 2 Aug 2018 document.

Regards

 

  • Upvote 1

Bob Scott | AVSIM Forums Administrator | AVSIM Board of Directors

ATP Gulfstream II-III-IV-V

System: i9-10900K @ 5.2GHz on custom water loop, ASUS Maximus XII Hero, 32GB GSkill 3600MHz CAS15, eVGA 2080Ti XC Ultra, Samsung 55" JS8500 4K TV@30Hz, 5xSamsung SSD, eVGA 1KW PSU

SB XFi Titanium, optical link to Yamaha RX-V467, Polk/Klipsch 6" bookshelf spkrs, Polk 12" subwoofer, 12.9" iPad Pro, PFC yoke/throttle quad/pedals with custom Hall sensors, Coolermaster HAF932 case, Stream Deck XL button box

Share this post


Link to post
Share on other sites
9 minutes ago, w6kd said:

It's actually in the User Guide (not the Advanced User's Guide).  Page 21 of the 2 Aug 2018 document.

Regards

 

Thank you kind sir!!!!


Jack Sawyer

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    22%
    $5,550.00 of $25,000.00 Donate Now
×
×
  • Create New...