Turbine Duke Panel

[reecemj 146]

2018-12-16_9-44-46-915 by Maurice Jones, on Flickr

 

Trying to install to look like F1 GTN. This is the best I got in the duke photo using Frank Patton Instruction.

Create a subfolder  in the T Duke panel folder for the f1vc.xml file. Selected the Use simulator Gps Commands.

Any help getting this setup would be appreciated . Thanks. 

 

 

 

// Panel Configuration file
// RealAir Simulations Beechcraft Turbine Duke V2 2014 Update
// Panel and Gauge Programming by Sean Moloney
// Copyright (c) 2014 RealAir Simulations

//NOTE: File edited 12/7/2017 by fppilot
//added 2nd Reality XP GTN 750
//added f1vc.xml gauge to allow Reality XP GTN's
//to work with the original bezels intended for the F1 GTN.

// ===============================================================================
// IMPORTANT - 'Window01' AND 'Window02' BELOW ARE RESERVED FOR GPS POPUPS AND CAN
// BE OVERWRITTEN BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY
// EDITING THIS FILE. IF YOU WANT TO ADD CUSTOM WINDOW ENTRIES, YOU CAN USE ANY
// VALUE FROM 'Window03' TO 'Window 09'.
// NOTE: which has beeen done by fppilot
// ===============================================================================
[Window Titles]
Window00=Main Panel
Window01=
Window02=
Window03=
Window04=
Window05=Reality XP Garmin GTN 750 2
Window06=
Window07=Reality XP Garmin GTN 750 1
Window08=

[Window00]
file=2D_Help.bmp
size_mm=1024, 95
position=6
BACKGROUND_COLOR=0,0,0
visible=1
ident=MAIN_PANEL

[Window05]
Background_color=0,0,0
size_mm=937,887
ident=14531
window_pos= 0.7705, 0.6085
window_size=0.2295, 0.3915
zorder=99
gauge00=rxpGTN!GTN_750_2,  0,0,937,887, UNPOP_RXP2

[Window07]
Background_color=0,0,0
size_mm=937,887
ident=15531
window_pos= 0.760, 0.6085
window_size=0.2295, 0.3915
zorder=99
gauge00=rxpGTN!GTN_750_1,  0,0,937,887, UNPOP_RXP

[VCockpit01]
size_mm=1024,1024
pixel_size=1024,1024
texture=$RAS_Duke_CFG
background_color=1,1,1

gauge01=Config!Options, 1020, 1023, 1, 1
gauge02=Config!RealView, 1021, 1023, 1, 1
gauge03=Config!RadioLayout, 1027, 1023, 1, 1

gauge04=RASDuke!InitVars, 1022, 1023, 1, 1
gauge05=RASDuke!1hzCode, 1023, 1023, 1, 1
gauge06=RASDuke!2hzCode, 1024, 1023, 1, 1
gauge07=RASDuke!18hzCode, 1025, 1023, 1, 1

gauge08=RASDuke!NavCom1, 1, 2, 509, 61
gauge09=RASDuke!NavCom2, 1, 64, 509, 61
gauge10=RASDuke!ADF, 4, 127, 332, 49
gauge11=RASDuke!Xpndr, 7, 243, 305, 57
gauge12=RASDuke!Autopilot, 5, 177, 292, 62
gauge13=RASDuke!DME, 4, 305, 256, 46
gauge14=RASDuke!KA285_Annun, 512,2,337,108
gauge15=RASDuke!Annunciator_Turbine, 516, 111, 226, 245
gauge16=RASDuke!Moritz_LCD, 808, 133, 214, 259
gauge17=RASDuke!Fuel_Qty_LCD, 410, 128, 105, 86
gauge18=RASDuke!Master_Warn, 893, 1, 130, 129

// ===============================================================================
// IMPORTANT - 'gauge19'. 'gauge20, 'gauge21', and 'gauge22' BELOW CAN BE OVERWRITTEN
// BY THE CONFIG PANEL. PLEASE KEEP THIS IN MIND WHEN MANUALLY EDITING THIS FILE
// IF YOU WANT TO CHANGE THE GPS ENTRIES AND DON'T WANT THEM OVERWRITTEN IN ANY
// CIRCUMSTANCE THEN CHANGE THE GAUGE NUMBERS. EG - CHANGE 'gauge 19' TO 'gauge22'
// ===============================================================================

gauge19=rxpGTN!f1vc
gauge20=rxpGTN!GTN_750_1,  2,563,390,460, POP_NO_BEZEL
gauge21=rxpGTN!GTN_750_2, 398,563,390,460, POP_NO_BEZEL2

gauge22=RASDuke!Blank, 0, 0, 1, 1
gauge23=RASDukeTv2_Sound!Sound, 1,1,2,2,./SimObjects/Airplanes/RealAir Duke Turbine V2/Panel/Sound/RASDukeTv2_Sound.ini
gauge24=RASDuke!Sound_Manager, 1,1,3,3
gauge25=RASDuke!Pressurisation, 1024, 1023, 1, 1

Day=255,255,255
Night=225,117,89
Luminous=200,200,101

[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=6144

 

 

[GTN_750_1]
; is the master device if true.
MasterDevice = true
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting percent (0 to 100)
Rheostat.Display = 100
; integral lighting percent (0 to 100)
Rheostat.Buttons = 75
; connects GPS to HSI if true.
LinkHsi = true
; connects GPS to HSI course if true.
LinkCrs = false
; connects HSI OBS to GPS if true.
LinkObs = false
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Autopilot if true.
LinkOto = true
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true
; enables automatic GPS/VLOC selection.
AutoSelect = true
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 0
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; connects GPS to Shadin Air Data computer if true.
UseAirData = true
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true
; connects GPS to Audio Panel if true.
UseAudioPanel = true
; connects GPS to Transponder if true.
UseTransponder = true
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; enable device failures if true.
UseFailures = false
; uses Simulator GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = true
; use legacy mouse (left CCW, right CW, middle Push) (override instances settings)
UseAltMouse = false
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = AVGAS
; sets ownship icon type:
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = AUTO
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TAWS_A
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), -1 (auto detect Vref: 0)
TawsApprSpeed = 0
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 0)
TawsFlapSpeed = 0
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 0)
TawsGearSpeed = 0
; HSI lateral deviation scale factor.
CdiScale = 1
; HSI vertical deviation scale factor.
GsiScale = 1
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; selects the default database: 0: 'Garmin (North America)', 1: 'Jeppesen (Worldwide)'
NavDbType = 0
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1

[GTN_750_1.DEFAULT]
; show screen only gauge if true.
nobezel = false
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; display mouse tooltips if true.
tooltips = false
; enable mouse clickspots if true, disable if false.
usemouse = true
; enable alternate click-spots (left CCW, right CW, middle Push) if true.
usealtmouse = false
; enable touch beyond screen bounds if true (2D only), clip if false (GTN native).
extendtouch = true
; auto-resize dimension (width,height)
refsize =
; left mouse button popup ident  (ex: GPS_PANEL or 225) (disables touchscreen when set).
popleft =
; right mouse button popup ident (ex: GPS_PANEL or 225).
popright = 
; adjust brightness (0 to 100)
brightness.bezel = 100
; offset brightness (-100 to +100)
brightness.screen = 0

[GTN_750_1.POP_NO_BEZEL]
nobezel = true
popright = 15531
brightness.screen = -38

[GTN_750_1.UNPOP_RXP]
popright = 15531

[GTN_750_2.POP_NO_BEZEL2]
nobezel = true
popright = 14531
brightness.screen = -38

[GTN_750_2.UNPOP_RXP2]
popright = 14531

 

<Gauge Name="f1vc" Version="2.04">

<!-- Reality XP GTN Buttons Bridge -->
<!-- Bridges Reality XP GTN 750/650 Touch with f1 3D bezel -->
<!-- Credits: Reality XP, Sean Moloney and Ryan Butterworth -->

<Element>
  <Select>
    <Value>
        (L:F1GTNMOUSE,bool) 0 !=
        if{
            (L:F1GTNMOUSE,bool) 0x0001FA01 - sp0 
            l0 28 / int sp1 l0 28 % sp0
            <!-- map F1 model to RXP GTN unit -->
            <!-- use: 8 0 8 0 for 652=unit2, 651=unit1, 752=unit2, 751=unit1 -->
            <!-- use: 0 0 8 0 for 652=unit2, 651=unit2, 752=unit1, 751=unit1 -->
      0 0 8 0 
      4 l1 case 4 2 l0 1 &amp; ? + sp1
            l0 0 == l0 1 == or if{ l1 (>K:GPS_MENU_BUTTON) }
            l0 2 == l0 3 == or if{ l1 (>K:GPS_DIRECTTO_BUTTON) }                
            l0 4 == l0 10 == or if{ l1 8 &amp; (>K:GPS_BUTTON2) }
            l0 6 == l0 11 == or if{ l1 8 &amp; (>K:GPS_BUTTON3) }
            l0 8 == l0 9 == or if{ l1 (>K:GPS_BUTTON1) }
            l0 12 == l0 18 == or if{ l1 8 &amp; (>K:GPS_GROUP_KNOB_INC) }
            l0 14 == l0 19 == or if{ l1 8 &amp; (>K:GPS_GROUP_KNOB_DEC) }
            l0 20 == l0 26 == or if{ l1 8 &amp; (>K:GPS_PAGE_KNOB_INC) }
            l0 22 == l0 27 == or if{ l1 8 &amp; (>K:GPS_PAGE_KNOB_DEC) }
            l0 24 == l0 25 == or if{ l1 (>K:GPS_CURSOR_BUTTON) }    
            l0 16 == l0 17 == or if{ l1 (>K:GPS_CURSOR_BUTTON) }    
            0 (>L:F1GTNMOUSE,bool)            
        }           
    </Value>      
  </Select>
</Element>
</Gauge>

 

 

 

[fppilot 4,371]

Cannot tell what you have done.  I provided listings for three separate files. 

panel.cfg
RealityXP.GTN.ini
-and-
f1vc.xlm

 It appears you may have put everything into one file.  Send me a private message here on Avsim and include a good email address for youself and I will send you the three files and instructions.

[reecemj 146]

31 minutes ago, fppilot said:

Cannot tell what you have done.  I provided listings for three separate files. 

panel.cfg
RealityXP.GTN.ini
-and-
f1vc.xlm

 It appears you may have put everything into one file.  Send me a private message here on Avsim and include a good email address for youself and I will send you the three files and instructions.

They are separate files place in the location you instructed. I will email you for the files. Thanks. 

[fppilot 4,371]

1 hour ago, reecemj said:

They are separate files place in the location you instructed. I will email you for the files. Thanks. 

OK. A couple of questions. Are you using the original RealAir Turbine Duke or are you using the Turbine Duke version 2.  I only have and use version 2 and am not sure my files will work well with the original version.

Next. If you are using what I provided as separate files then what specifically is it that is not working for you?  Just do not want to chase unknown issues here. OK