December 22, 20187 yr 2 hours ago, LH340fan said: On the post they talked about PBR for the VC as well (reflexion on the fms) i think I wonder if the fms is the only pbr item. I would assume it wouldn't be but either way. Will still be cool to see. FAA: ATP-ME, 737 CA, enough time in the 757/767 to be dangerous 🤠 Matt Kubanda, 7950X3D, 64GB RAM, RTX 5090@4k, MSFS 2024
December 22, 20187 yr Seeing they keep on improving an already very good looking product I am tempted to give myself a nice little Xmas present. As they have no place for me to ask on their own forums prior to purchase (which is sad), I want to try good old avsim to get the answers to my questions. Thanks in advance. # Is it possible to use separate axis for tiller and rudder like in other study level addons (FSL A320 or Majestic Q400 are the only ones I know who did it right)? # Does loading / importing PFPX flightplans into the FMC work? # What is your experience with the default modules for the MD-82 of PFPX and TOPCAT? Are they good enough? Are there better ones available? # Is it possible to create customized panel states which are automatically loaded with the aircraft (like it is nicely done with PMDG aircraft)? I have seen in reviews there are three default states but that's not what I mean. # How is performance compared to PMDG NGX and FSL A320? Lastly, what is (in your opinion) the main point of critique about this addon? I ask this because I want to avoid buying an addon which in the end I will not use. At the moment, I exclusively fly the FSL A320/A319, because for me personally, this is the pinnacle of desktop flightsimming. I feel the Leonardo Maddog is close or equal in most regards and even above in others (visuals). Thanks again and merry christmas to all of you. cheers, NiIs U.AMD 5800X3D | 32GB DDR4 RAM @ 3200MHz | RTX 4070 12GB @ 1920x1050px
December 22, 20187 yr Author Hi Nils, 1) Not that I know of 2) Don’t think so, I always enter manually. 3) Topcat works good, I use it, for a flex temp. 4) Yes, you start with let’s say the default C&D, set the aircraft as you like, then change the new saved panel state by renaming it to C&D. The new C&D will be how you like it. You cannot save states in the FMC. 5)Performance is great around the same as the NG. I only fly this aircraft 1 to every 10 times I fly the A319/NG, so wait to see what other answers you get am not a expert unlike the NG/A319 that I know very well. I agree the FSL 319 is the pinnacle of all. Edited December 22, 20187 yr by Nyxx David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
December 22, 20187 yr 11 minutes ago, Nyxx said: 1) Not that I know of Oh no! 😭 Actually I don't want to go back to addons that don't offer realistic flight control setups. 12 minutes ago, Nyxx said: 4) Yes, you start with let’s say the default C&D, set the aircraft as you like, then change the new saved panel state by renaming it to C&D. The new C&D will be how you like it. You cannot save states in the FMC. So you can save panel states via P3D menu but not in the FMC? That's okay, as I would do it only once anyway. Thanks David! cheers, NiIs U.AMD 5800X3D | 32GB DDR4 RAM @ 3200MHz | RTX 4070 12GB @ 1920x1050px
December 22, 20187 yr With the latest PFPX update I was able to export a flightplan that was accepted by the Maddog. This wasn’t the case previously. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
December 22, 20187 yr Thanks Dave, good to know. What profile are you using? cheers, NiIs U.AMD 5800X3D | 32GB DDR4 RAM @ 3200MHz | RTX 4070 12GB @ 1920x1050px
December 22, 20187 yr 22 minutes ago, NovemberUniform said: Oh no! 😭 Actually I don't want to go back to addons that don't offer realistic flight control setups. So you can save panel states via P3D menu but not in the FMC? That's okay, as I would do it only once anyway. Thanks David! I have a steering tiller assigned to another axis on my HOTAS via FSUIPC and it works fine. The profile I use for PFPX is highly accurate. I'm not sure if it's default or one from another developer. I can try to figure it out but I'll have to get on my desktop Todo it. Aircraft performance is comparable if not better than the NGX. Visuals are very good as well. Brian Thibodeaux | B747-400/8, C-130 Flight Engineer, CFI, Type Rated: BE190, DC-9 (MD-80), B747-400 My Liveries
December 22, 20187 yr 49 minutes ago, NovemberUniform said: Thanks Dave, good to know. What profile are you using? For the export I used the "Leonardo SH MD82 2008/2010 (P3D)" export option. Dave Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU
December 22, 20187 yr 57 minutes ago, thibodba57 said: I have a steering tiller assigned to another axis on my HOTAS via FSUIPC and it works fine. Thanks. And you can move the rudder without turning the nose wheel? cheers, NiIs U.AMD 5800X3D | 32GB DDR4 RAM @ 3200MHz | RTX 4070 12GB @ 1920x1050px
December 23, 20187 yr 6 hours ago, Lenny777 said: Yeah now in the Forums problem is the downloader they have. Wait in line for x minutes or create an account with MEGA. Ridiculous. You should just cut and paste the code in the forums for Mega download. You dont need to create an account for Mega Richie Walsh
December 23, 20187 yr 1 hour ago, NovemberUniform said: Thanks. And you can move the rudder without turning the nose wheel? Hmmm, I don't play with the rudder. However in the real aircraft the ruddger pedals will move the nosewell anyways. If I recall it's 7* vs 70* in the tiller. Same sith the 74 and I'm pretty sure all aircraft. Brian Thibodeaux | B747-400/8, C-130 Flight Engineer, CFI, Type Rated: BE190, DC-9 (MD-80), B747-400 My Liveries
December 23, 20187 yr Odd, installs fine but getting an error when I hit the register button (email and key provided) Anyone else run into this issue? It's possible I didn't deactivate my old license when I wiped out my other PC and install on my new PC now ... but not much to go on from this error message. Cheers, Rob.
December 23, 20187 yr 2 hours ago, Rob Ainscough said: Odd, installs fine but getting an error when I hit the register button (email and key provided) Anyone else run into this issue? It's possible I didn't deactivate my old license when I wiped out my other PC and install on my new PC now ... but not much to go on from this error message. Cheers, Rob. Haven't Rob. Maybe a bad download? A. Ortega AMD Ryzen 7 9800X3D Processor, MSI MAG B850 Tomahawk MAX WiFi Motherboard, Samsung 980 Pro 2TB SSD, Samsung 870 4TB SATA, Nvidia GeForce RTX 5090 Founders Edition Video Card, Rosewill VMG 1000W 80+ Gold Power Supply, Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, Windows 11 x64 Home, 2.5gb fiber ISP.
December 23, 20187 yr Do the PBR liveries come with the new installer or do you have to download those separately? Thanks. Richard Chafey i7-8700K @4.8GHz - 32Gb @3200 - ASUS ROG Maximus X Hero - EVGA RTX3090 - 3840x2160 Res - KBSim Gunfighter - Thrustmaster Warthog dual throttles - Crosswind V3 pedals MSFS 2020, DCS
December 23, 20187 yr 20 minutes ago, RichieFly said: Do the PBR liveries come with the new installer or do you have to download those separately? Thanks. separately from their support forum. R9-9950X3D 32G | RTX5090 | 3T m.2 | Win11 | vkb-gf ultimate & pedals | virpil cm3 throttle | tm boeing yoke | pimax super uw | DCS
Archived
This topic is now archived and is closed to further replies.