Jump to content

Sign in to follow this  
Fleahead

Carenado A36 No Power GNS430/530 (resolved)

Recommended Posts

 

After replacing the default 430 with the RXP430, I can see the unit, but I can not power it on. I have tried various power options for the RXP 430 but nothing works. The default A36 unit 2 powers on fine. (This scenario is also the same for the RXP 530 as well as the GTN750)


i7-6700 - GTX1070 - Win10 - P3Dv4.4

Share this post


Link to post
Share on other sites

What power settings have you set in the configuration menus?


Frank Patton
MSI Z490 WiFi MOB;  i7 10700 3.8 Ghz CPU; Ripjaws 32 gb DDR4 3600; ASUS GTX 1070 TI Turbo 8GB; MasterCase H500M; Corsair H100i Pro cooler; Corsair RMX850X PSU; ASUS VG289 4K 27"; Former USAF meteorologist & ground weather school instructor; AOPA Member #07379126 
                        There is no limit to what a man can do or where he can go if he doesn’t mind who gets the credit! - Benjamin Jowett

 

Share this post


Link to post
Share on other sites

Hi,

can you please post the content of the RXP log files? (see User's Manual for file/path)


Jean-Luc | reality-xp.com
This message from Reality XP is protected by a disclaimer: reality-xp.com/aboutrealityxp/email.html

Share this post


Link to post
Share on other sites

fppilot... I have tried all the options for power. None work. Regardless it should work with Always On . Thanks....

 

Mr. President... here are the logs.
 

rxpGnsSim.dll.log

19/01/25 06:32:40.270 14276 -    ] # rxpGnsSim64.dll version 2.4.6.0
19/01/25 06:32:40.270 14276 INFO ] 
19/01/25 06:32:41.480 14276 ERROR] no device available for G430.1
 

rxpGNS2.gau.log

19/01/25 06:32:37.944 14276 -    ] # rxpGNS2.dll version 2.4.6.0
19/01/25 06:32:37.944 14276 INFO ] 
 

rxpGNS2_menu.dll.log

19/01/25 06:18:06.576 17172 -    ] # rxpGNS2_menu.dll version 2.4.6.0
19/01/25 06:18:06.606 17172 INFO ] edit panel: C:\P3Dv4\SimObjects\Airplanes\Carenado BONANZA A36\panel\panel.cfg
19/01/25 06:23:03.344 11732 INFO ] 
19/01/25 06:23:03.366 11732 INFO ] edit panel: C:\P3Dv4\SimObjects\Airplanes\Carenado BONANZA A36\panel\panel.cfg
19/01/25 06:25:39.988 06488 INFO ] 
19/01/25 06:25:40.005 06488 INFO ] edit panel: C:\P3Dv4\SimObjects\Airplanes\Carenado BONANZA A36\panel\panel.cfg
19/01/25 06:29:00.367 09356 INFO ] 
19/01/25 06:29:00.381 09356 INFO ] edit panel: C:\P3Dv4\SimObjects\Airplanes\Carenado BONANZA A36\panel\panel.cfg
19/01/25 06:30:53.324 20232 INFO ] 
19/01/25 06:30:53.372 20232 INFO ] edit panel: C:\P3Dv4\SimObjects\Airplanes\Carenado BONANZA A36\panel\panel.cfg
19/01/25 06:32:36.130 15916 INFO ] 
19/01/25 06:32:36.189 15916 INFO ] edit panel: C:\P3Dv4\SimObjects\Airplanes\Carenado BONANZA A36\panel\panel.cfg
 

I tried some troubleshooting  today using different scenarios. First I loaded the original A36 panel.cfg to start clean.

First I  replaced the A36  430-1 with your 430 in  Window00 and left VC 03 as is. I could power on both VC units fine. In window-00 the RXP unit 1 still did not work and the A36 unit 2 worked OK. 

Next after reloading panel.cfg I  left the window00 units as A36 units and they both worked. I replaced unit 1 in the VC with the RXP unit and it would not power on but unit 2 worked OK.

I noticed another thing to be aware of. I I try to remove all RXP units from the Add On menu, it does remove all the RXP stuff but does not reinstate the orginal  units. I just have a black space were the unit should have been. That's mainly why I reload the panel. cfg file.

 


i7-6700 - GTX1070 - Win10 - P3Dv4.4

Share this post


Link to post
Share on other sites
6 hours ago, Fleahead said:

fppilot... I have tried all the options for power. None work. Regardless it should work with Always On . Thanks....

You have not mentioned if you are using FSX or P3D.  I am using FSX.  I am also using RXP GNS v2 gauges.  Would you confirm that is what you are using?

I have a nice working panel with a pair of RXP GTN 430's.  It includes a single popuip that brings up both gauges as a cluster.  A left-click on either brings up the cluster popup, another left-click on the cluster closes the popup.  My panel also includes an .xml file provided by another user here that automatically sets the Carenado virtual cockpit's "Instrument Reflections" to default to off (otherwise an A36 shift-3 option).  Those instrument reflections, if I recall, interfered with using the GNS knobs and buttons in the VC, so had to be set to off.


Frank Patton
MSI Z490 WiFi MOB;  i7 10700 3.8 Ghz CPU; Ripjaws 32 gb DDR4 3600; ASUS GTX 1070 TI Turbo 8GB; MasterCase H500M; Corsair H100i Pro cooler; Corsair RMX850X PSU; ASUS VG289 4K 27"; Former USAF meteorologist & ground weather school instructor; AOPA Member #07379126 
                        There is no limit to what a man can do or where he can go if he doesn’t mind who gets the credit! - Benjamin Jowett

 

Share this post


Link to post
Share on other sites
7 hours ago, Fleahead said:

19/01/25 06:32:41.480 14276 ERROR] no device available for G430.1

Hi,

Have you purchased the GNS 430 V2 or just the GNS 530 V2?


Jean-Luc | reality-xp.com
This message from Reality XP is protected by a disclaimer: reality-xp.com/aboutrealityxp/email.html

Share this post


Link to post
Share on other sites

I didn't know they were purchased individually. What I ordered was titled Reality XP GNS 530W/430W V2 assuming that it included both models. Order # was 1428037.


i7-6700 - GTX1070 - Win10 - P3Dv4.4

Share this post


Link to post
Share on other sites

It seems our communication might have miss-guided you.

What you've purchased, as labeled in the e-commerce installer is either:

  • RealityXP Garmin GNS 530 (FltSim)
  • RealityXP Garmin GNS 430 (FltSim)

Can you please help us make this more prominent so that it helps other customers?

As of now, we're communicating the very notion of the 2 different products in many ways:

  • depicted visually with the side bar graphics in the e-commerce installer
     
  • exhibited as 2 different products in 2 different 'boxes' in our website.
     
  • e-commerce installer right side description mention:
    "The WAAS-certified GNS 530W lead the industry with multitasking" or
    "The WAAS-certified GNS 430W lead the industry with multitasking".
     
  • the e-commerce installer file name is either
    rxpGNS2-530-FSIM.exe or
    rxpGNS2-430-FSIM.exe
     
  • the freely downloadable product's manuals mention (p4):
    "it requires purchasing and installing both products to unlock both GNS models."
     
  • It is also hinted to with our current special offer shown as:
    Complete your collection and save 50% on the 2nd product!*
    Add 2nd GNS product for only $24.95

There are certainly more places, starting with our forums too.

What would you suggest?

 


Jean-Luc | reality-xp.com
This message from Reality XP is protected by a disclaimer: reality-xp.com/aboutrealityxp/email.html

Share this post


Link to post
Share on other sites

fppilot... I use P3Dv4.4 and simPlugins Panel Builder gauges. I really am not using the RXP 530/430 gauges for anything. I bought them before I bought realsimgear's GTN750 bezel that uses the RXP GTN-750 for the touch screen display. It works just fine. I was just experimenting with the 430 to use when I fly virtual reality.

email is:  mader.jim@gmail.com


i7-6700 - GTX1070 - Win10 - P3Dv4.4

Share this post


Link to post
Share on other sites

Thanks Jean-Luc... I presume the last half of your post was not directed for me, but I see that you are well aware of the confusion that the product description could cause. I am not actually using the 430 for anything since I purchased your GTN750 to use with realsimgear's GTN750 bezel. (yes, I did purchase the 750, not the 650), so this is not a problem for me. I do have some questions about using your 750 in Carenado's A36, but I will submit a new post for that. 

Thanks again for explaining this.

  • Like 1

i7-6700 - GTX1070 - Win10 - P3Dv4.4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    28%
    $7,035.00 of $25,000.00 Donate Now
×
×
  • Create New...