Jump to content
Sign in to follow this  
ClayWagner

Panel Mod Req: Aerobask Eclipse 550 + GTN 650

Recommended Posts

On 7/17/2018 at 9:59 AM, emef said:
On 7/17/2018 at 9:59 AM, emef said:

The RXP GTN 750 can also be integrated into the cockpit of the Aerobask Eclipse 550 (similar to the Aerobask Panthera😞

Eclipse550_RXPGTN750_2.jpg
Aerobask Eclipse 550 virtual cocpit with RXP GTN 750 and Aerobask GTN 650

I wish there was 650 mod as well.

Share this post


Link to post
Share on other sites

I could have sworn there was a mod out there for the Eclipse 550 that let you use both the 750 and the 650 but when I went searching for you, I couldn't find it for love nor money. I'm going crazy looking for it because I swore I used it before, If anyone out there has it, can you post a link?

  • Like 1

Share this post


Link to post
Share on other sites

Thanks. I may try to create it myself using the Baron 58 tutorial. I don’t have the slightest idea how to create these mods. Might be a disaster. 🙂

Share this post


Link to post
Share on other sites

Zarigani pretty sure I've seen it too, really wish the forum here was a bit more organised.

ClayWagner, that baron example is relatively straight forward, a few videos on youtube too.

Would be happy to give it a go if you want, but need a file from you so I know where it goes.. If you could go into keybindings and look for "Make screenshot of your panels", assign something then use it. Should create a "Panel_Preview" image file in the Eclipse 550 > cockpit_3D > -PANELS- folder. Just make sure the avionics are on when you do that and don't resize the file. I can't really test it, no guarantees I get it right first go 😉 

Edited by N1K380

Share this post


Link to post
Share on other sites
6 hours ago, N1K380 said:

Zarigani pretty sure I've seen it too, really wish the forum here was a bit more organised.

ClayWagner, that baron example is relatively straight forward, a few videos on youtube too.

Would be happy to give it a go if you want, but need a file from you so I know where it goes.. If you could go into keybindings and look for "Make screenshot of your panels", assign something then use it. Should create a "Panel_Preview" image file in the Eclipse 550 > cockpit_3D > -PANELS- folder. Just make sure the avionics are on when you do that and don't resize the file. I can't really test it, no guarantees I get it right first go 😉 

Thank you! Here is link to the file.

https://www.dropbox.com/sh/81hshqy1w2xss2x/AADdufox9qEa5Vh9_awKZA7Sa?dl=0

 

Share this post


Link to post
Share on other sites

Give this a roll of the dice...

GTN 750 is set as the primary and Nav 1, 650 on 2.

Quote

[GTN]
; comma separated list of gauges
gauges = GTN_750_1, GTN_650_2

[GTN_750_1]
; comma separated list of render targets.
drawto = WINDOW, PANEL3D
; is the master device if true.
MasterDevice = true
; connects GPS to copilot side if true.
CopilotSide = false
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 1
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to HSI if true.
LinkHsi = true 
; connects GPS to HSI course if true.
LinkCrs = true
; connects HSI OBS to GPS if true.
LinkObs = true
; connects GPS to VOR if true.
LinkVor = false
; connects GPS to Autopilot if true.
LinkOto = true 
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true 
; enables automatic GPS/VLOC selection.
AutoSelect = true 
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 1
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; connects GPS to Shadin Air Data computer if true.
UseAirData = true 
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true 
; connects GPS to Audio Panel if true.
UseAudioPanel = true 
; connects GPS to Transponder if true.
UseTransponder = true 
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true 
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; enable device failures if true.
UseFailures = false
; intercepts X-Plane GPS commands if true.
UseSimGpsCmds = true
; updates Simulator GPS flight plan if true.
LinkSimGps = true
; saves the active route as a Simulator flight plan if true.
AutoSavePln = true
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = JETA
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = BUSINESS_JET
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TAWS_A
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), -1 (auto detect Vref: 96)
TawsApprSpeed = 96
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 125)
TawsFlapSpeed = 125
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 194)
TawsGearSpeed = 194
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1

[GTN_750_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1383,911,537,511
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true 
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,790,830,790
; display as popout window if true (requires XP11.1).
undocked = false

[GTN_750_1.PANELS]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1024,2048,600,707
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false

[GTN_650_2]
; comma separated list of render targets.
drawto = WINDOW, PANELS
; is the master device if true.
MasterDevice = false
; connects GPS to copilot side if true.
CopilotSide = true 
; selects COM/NAV Radios '1' or '2'.
RadiosPair = 2
; uses computer time if true, simulator time otherwise.
ComputerTime = false
; reduce screen update rate by half.
ReduceRate = false
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Display = -100
; integral lighting rheostat index (0 to 3) or percent (-100 to 0)
Rheostat.Buttons = -75
; connects GPS to Autopilot if true.
LinkOto = false
; connects GPS to HSI if true.
LinkHsi = True
; connects GPS to HSI course if true.
LinkCrs = True
; connects HSI OBS to GPS if true.
LinkObs = True
; connects GPS to VOR if true.
LinkVor = false
; connects CDI key to NAV/GPS switch if true.
AutoNavGps = true 
; enables automatic GPS/VLOC selection.
AutoSelect = true 
; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'.
AutoNavSource = 2
; sets device power source: ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY
PowerSource = AVIONICS_BUS
; connects GPS to Shadin Air Data computer if true.
UseAirData = true 
; connects GPS to Shadin Fuel Data computer if true.
UseFuelData = true 
; connects GPS to Audio Panel if true.
UseAudioPanel = true 
; connects GPS to Transponder if true.
UseTransponder = true 
; connects GPS to RYAN 9900BX if true.
UseRyanTcad = true 
; sets TCAD sound alerts volume in percent: 0 to 100.
RyanTcadVolume = 50
; enable device failures if true.
UseFailures = false
; intercepts X-Plane GPS commands if true.
UseSimGpsCmds = false
; updates Simulator GPS flight plan if true.
LinkSimGps = false
; saves the active route as a Simulator flight plan if true.
AutoSavePln = false
; sets transponder VFR code (octal default: #1200).
VFRcode = #1200
; sets fuel type: AVGAS,JETA,JETB,DIESEL
FuelType = JETA
; sets ownship icon type: 
; AUTO,LOW_WING,HIGH_WING,KIT_PLANE,TURBOPROP,TWIN_ENGINE,SINGLE_JET,BUSINESS_JET,2BLADES,3BLADES,4BLADES,ARROW
OwnshipIcon = BUSINESS_JET
; selects the default database: 0: 'Garmin (North America)', 1: 'Jeppesen (Worldwide)'
NavDbType = 1
; sets TAWS type: TERR,TAWS_B,TAWS_A
TawsMode = TERR
; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY
TawsSurface = HARD_SOFT
; TAWS minimum runway length (feet)
TawsMinLength = 40
; TAWS approach air speed (knots), -1 (auto detect Vref: 96)
TawsApprSpeed = -1
; TAWS maximum flap extension speed (knots) or -1 (auto detect Vfe: 125)
TawsFlapSpeed = -1
; TAWS maximum gear extension speed (knots) or -1 (auto detect Vle: 194)
TawsGearSpeed = -1
; sets voice type: MALE,FEMALE
VoicePref = MALE
; sets master sound volume in percent: 0 to 100.
MasterVolume = 100
; mute sound when simulator window looses focus if false.
NoAudioFocus = false
; selects the CPU running the trainer process: 1 to 32
; 0: last core, -1: automatic.
CpuAffinity = -1

[GTN_650_2.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1383,400,537,226
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,350,830,350
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GTN_650_2.PANELS]
; display window if true.
visible = true 
; show screen only gauge if true.
nobezel = true 
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1024,1340,599,266
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = false

 

Edited by N1K380
  • Like 1

Share this post


Link to post
Share on other sites

Unfortunately it did not work. I copied the entire contents and overrode it. The original 650 was still showing.

Share this post


Link to post
Share on other sites
8 hours ago, N1K380 said:

If the RXP 750 turned up then this should fix it, if not I'll have time on the weekend to give it more time.
Annoyingly I can't edit the previous post so ill try this method 🤔

https://www.dropbox.com/s/nw7mmtex4lq1bbx/RealityXP.GTN.ini?dl=0

Ok great. I will check tonight. Thank you so much for taking the time to help me!!

Share this post


Link to post
Share on other sites

Outdated already 😛

Only had my macbook with me, which doesn't run GTN's. Code kept me busy on a few weeknights..
Just tested using two 750's so it should be working with the 650 now. Remapped the 3D panel buttons while i was at it. 
Files are in the aircraft mods thread 

 

  • Like 1

Share this post


Link to post
Share on other sites
7 hours ago, N1K380 said:

Outdated already 😛

Only had my macbook with me, which doesn't run GTN's. Code kept me busy on a few weeknights..
Just tested using two 750's so it should be working with the 650 now. Remapped the 3D panel buttons while i was at it. 
Files are in the aircraft mods thread 

 

Awesome job. Thank you!!!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...