ErichB

EZDOK V3 - I like what I see

Recommended Posts

17 minutes ago, simbol said:

I know, perhaps you miss understood me.

I like to enable the turbulence module as it simulates (in my view) properly what happens to pilots when they are trying to reach out for controls.. it is not the same trying to push that "App" button when the aircraft is being torn apart during turbulence as when the flight is being smooth :).

S.

 

Therefore I use many views (about 40?) under my fingers on my CH Fighterstick/CH Throttle Combo using CHM scripts. There are certain views for looking outside (with all kind of head/plane shakes and movements enabled) and certain views for "mouse-fumbling" with the buttons and rotaries where all EZDOC generators are disabled. 

I stopped using TIR in P3D since I figured out my views system. 

Thanks to EZCA and CH Combo.

Edited by Dirk98

Share this post


Link to post
Help AVSIM continue to serve you!
Please donate today!

Does ezca v3 the screen goes dark when changing the view.

Share this post


Link to post
47 minutes ago, Dez said:

Does ezca v3 the screen goes dark when changing the view. 

This is the Fade-in / Fade-out function. It looks nice when changing views, but if you suddenly have problems with this (blinking screen), this feature can be disabled in the "General settings".

Share this post


Link to post
49 minutes ago, Dez said:

Does ezca v3 the screen goes dark when changing the view.

not for me, in flight with the DA62, zoom into the PFD and then transfer to the MFD straight to the Pilot Landing view and finally back to the Pilot view, no change in screen.

edit … very smooth

bob

Edited by onebob

Share this post


Link to post
1 hour ago, simbol said:

I know, perhaps you miss understood me.

I like to enable the turbulence module as it simulates (in my view) properly what happens to pilots when they are trying to reach out for controls.. it is not the same trying to push that "App" button when the aircraft is being torn apart during turbulence as when the flight is being smooth :).

If for some there is a problem of interaction with the controls of the aircraft, you can always turn off all EZCA functionality with one button (Num3 by default), do everything you need without effects and then turn on the EZCA.

Share this post


Link to post
32 minutes ago, onebob said:

not for me, in flight with the DA62, zoom into the PFD and then transfer to the MFD straight to the Pilot Landing view and finally back to the Pilot view, no change in screen. 

Fade-in / Fade-out works only when switching from external to internal views. When switching within the VC, this effect does not work.

In addition, in order for the effect to work, there must be a full screen, in focus and P3D4 simulator. This does not work in FSX.

Edited by Nickbe
  • Like 1

Share this post


Link to post
30 minutes ago, Nickbe said:

If for some there is a problem of interaction with the controls of the aircraft, you can always turn off all EZCA functionality with one button (Num3 by default), do everything you need without effects and then turn on the EZCA.

No problem with interactions, I love it!!!, it just simulates properly how pilots need to adapt to reach for their controls under such circumstances. Anyone that has been on a full motion simulator / pilot in command of an airplane during turbulence can relate :)

S.

  • Like 1

Share this post


Link to post
4 minutes ago, simbol said:

No problem with interactions, I love it!!!, it just simulates properly how pilots need to adapt to reach for their controls under such circumstances. Anyone that has been on a full motion simulator / pilot in command of an airplane during turbulence can relate 🙂

S.

Are we talking about EZCA3? I also really like when close to reality. I'm flying and ready for challenges. I now look at the radar screen))) Soon we will release an update where you can adjust the turbulence for a particular aircraft, then it will become even closer to reality. I am now editing the features of turbulence in the advanced editor. It will be very convenient when it is available to all.

Share this post


Link to post

Can all the aircraft cameras be imported from V2 to V3? Does the EZDOK V2 database for all the specific aircrafts / liveries work with V3?

Share this post


Link to post
1 minute ago, Nickbe said:

Are we talking about EZCA3?

Affirmative. 

But even V2 was doing a good job on this regard.

S.

 

Share this post


Link to post
3 minutes ago, Cargostorm said:

Can all the aircraft cameras be imported from V2 to V3? Does the EZDOK V2 database for all the specific aircrafts / liveries work with V3?

When you first start EZCA3 it will offer to import all camerasets from version 2 and will do everything automatically.

Edited by Nickbe

Share this post


Link to post
Just now, Nickbe said:

When you first start ESCA 3 it will offer to import all camerasets from version 2 and will do everything automatically.

Great! Thank you! This will save many hours...

Share this post


Link to post
18 minutes ago, simbol said:

No problem with interactions, I love it!!!, it just simulates properly how pilots need to adapt to reach for their controls under such circumstances. Anyone that has been on a full motion simulator / pilot in command of an airplane during turbulence can relate :)

S.

But not with your mouse, say, turning the rotaries on the monitor, simbol!! ))

So I prefer to have several views for that, including those where some or all of EZCA generators are disabled. It's just a matter of how many views you can create and handle them in a logical way if you think about it. 

Edited by Dirk98

Share this post


Link to post
3 minutes ago, Dirk98 said:

But not with your mouse, say, turning the rotaries on the monitor, simbol!! ))

So I prefer to have several views for that, including those where some generators are disabled. It's just a matter of how many views you can create and handle them in a logical way.  

Alternatively, you can create a separate camera view on the MCP and disable all effects in it. This almost as 2D panel :))

All depends on our preferences and we can to do this on ways.

Share this post


Link to post
5 minutes ago, Nickbe said:

Alternatively, you can create a separate camera view on the MCP and disable all effects in it. This almost as 2D panel :))

All depends on our preferences and we can to do this on ways.

And that's exactly what I'm saying. Therefore I never use FMC 2D pop ups or similar, instead I just press a certain HAT/Key on my joystick and my POV rolls down to the unit, with all generators disabled. And so on for other parts and units, like MCP etc. It all works very natural, better, than TIR. I can still use it with my system, but I don't need it at all. With EZCA and a serious joystick system you can simulate all your POV needs.

 

Edited by Dirk98
  • Like 1

Share this post


Link to post

Nick, another question: is it possible to have EZDOK V2 installed for P3DV3 and EZDOK V3 for P3DV4 on the same PC so that they do not interfer with each other?

Edited by Cargostorm

Share this post


Link to post
32 minutes ago, Dirk98 said:

But not with your mouse, say, turning the rotaries on the monitor, simbol!! ))

Lol but I like it this way... RW operation face the same difficulty, I am happy like this :).

S.

Share this post


Link to post

Well, I bought it. What I have a problem with is the turbulence effect. Or better say every effect. I tried it on the FSLabs A319 in pretty bad weather. I activated AS 16 on the menu. Everything looks okay. The scale in the turbulence section moves but I don't see any effect. Not on the ground and not in the air. Effects are enabled of course. Also, I imported the core "heavy"... Any Ideas?

Share this post


Link to post
1 hour ago, Cargostorm said:

Nick, another question: is it possible to have EZDOK V2 installed for P3DV3 and EZDOK V3 for P3DV4 on the same PC so that they do not interfer with each other? 

Yes, it should work independently.

Share this post


Link to post
4 minutes ago, frankyfirstt said:

Well, I bought it. What I have a problem with is the turbulence effect. Or better say every effect. I tried it on the FSLabs A319 in pretty bad weather. I activated AS 16 on the menu. Everything looks okay. The scale in the turbulence section moves but I don't see any effect. Not on the ground and not in the air. Effects are enabled of course. Also, I imported the core "heavy"... Any Ideas? 

You have enabled the turbulence module (XTm) in General settings?

Share this post


Link to post
41 minutes ago, frankyfirstt said:

Yes Sir

With FSLabs aircraft can be some difficulties. After loading the aircraft, try to restart EZCA3 via the menu "File-restart" . The FSLabs built-in view system must be disabled. And such questions we need to solve on a support forum or through support ticket.

https://www.simforums.com/forums/ezdok-software_forum39.html

http://ezdok-camera.com/troubleshooting

I think it is not right to solve such issues in this forum.

Edited by Nickbe

Share this post


Link to post

Restarting seems did the trick but only for the Captain view. For Wing view or any interior, it doesn't...

Share this post


Link to post
30 minutes ago, frankyfirstt said:

Restarting seems did the trick but only for the Captain view. For Wing view or any interior, it doesn't...

Did you save the cameraset (File-Update Camera set)?

Share this post


Link to post
6 minutes ago, Nickbe said:

Did you save the cameraset (File-Update Camera set)?

Yes. As described in the Manual for Outside shaking the Artificial Camer Vib. is used but that also doesn't work because even in hard turbulence there is no Bar rising when I open Effect Studio. 

Edited by frankyfirstt

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now