February 13, 20197 yr Author 3 minutes ago, westman said: it work really good, one thing that i like to have is 4 joystick slots 3 slots used cant enable my xbox controller for observer mode without disable one of the sticks that use for views I'm not sure I understand the issue. When you say 'slots' what do you mean? I find an xbox controller really useful for external walkarounds. Do you mean if you assign views to another controller you can't use the xbox controller to do the same?
February 13, 20197 yr 8 minutes ago, ErichB said: I'm not sure I understand the issue. When you say 'slots' what do you mean? I find an xbox controller really useful for external walkarounds. Do you mean if you assign views to another controller you can't use the xbox controller to do the same? it have 3 joystickslots there you bind the joystick that you use in ezdok, i have 4 that i want to use in ezdok 3 normal and xbox http://
February 13, 20197 yr Commercial Member Yes, EZCA can work only with 3 controllers. We did not anticipate that more might be required. But, Hatswitch on any of the controllers can control the view. I think this is not possible in CP. Edited February 13, 20197 yr by Nickbe Nick Bebyakin / Handmade cameraset - Ezdok v2 and Ezdok v3 EZdok Software. Support remains on the http://www.ezdok-camera.com/ [email protected] / 20Gb / RTX 2060-OC-6Gb / Win10x64 / MSFS2020
February 13, 20197 yr 25 minutes ago, Nickbe said: Yes, EZCA can only work with 3 controllers. We did not anticipate that more might be required. But, Hatswitch on any of the controllers can control the view. I think this is not possible in CP. that what i use in CP, but i prefer EZCA not change back and i think its lighter on the system then CP ( personal thoughts) Edited February 13, 20197 yr by westman http://
February 13, 20197 yr I currently have CP and used to have an early version of EZ. I want to give v3 a try. Right now, CP loads automatically when starting P3d. If I were to try EZ, is there an easy way to disable CP from starting and to have EZ start when opening P3d without any sort of complication? Or would I have to uninstall CP first, then install EZ? Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive
February 13, 20197 yr 5 hours ago, Nickbe said: Yes, EZCA can work only with 3 controllers. Please see if 4 will be possible to code. Thanks
February 14, 20197 yr After watching the official video on youtube. It saying the aircraft movement does not work on some aircraft. I just DL and read the manual to find out what aircraft it does not work with but it does not say. Could you say please? I only fly the FSL A319-A320, PMDG NG/777/-8 so I would like to hear from people using it with them aircraft. How you are finding it over CP. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
February 14, 20197 yr Commercial Member 11 minutes ago, Nyxx said: PMDG NG/777/-8 I know it works fine on these, + Carenado airplanes for sure. S. Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
February 14, 20197 yr purchased today, but is it "normal" i was taxiing at LOWW with 747-8 at about 20 knots, and in the VC i had a lot of shaking going on. For sure it should sake but that was prety heavy. C. W. ,Ryzen 9 5950X @H2O , 32 GB RAM DDR4 3600 Mhz CL15 , Corsair MP600 Pro Watercooled 2 TB for P3D, Samsung SSD980 1 TB for Addons and Crucial MMX500, Red Devil Ultimate 6900 XT
February 14, 20197 yr Commercial Member 4 minutes ago, 331BK said: For sure it should sake but that was prety heavy. You can adjust it, you can reduce the levels to your liking.. S. Oficial Website: https://www.FSReborn.com Discord Channel: https://discord.gg/XC82TqvKQ3
February 14, 20197 yr Commercial Member There are some problems with FSLabs aircraft. After loading the flight, you must manually switch the view to "EZCA VC com" via the simulator menu. DHM, Effect scale, and TONE effects should be reduced compared to default settings and other aircraft. Soon we will make a few videos on setting up EZCA v3 and specifically for different aircraft. The FSL issue is related to the fact that they directly modify the file aircraft.cfg Nick Bebyakin / Handmade cameraset - Ezdok v2 and Ezdok v3 EZdok Software. Support remains on the http://www.ezdok-camera.com/ [email protected] / 20Gb / RTX 2060-OC-6Gb / Win10x64 / MSFS2020
February 14, 20197 yr Commercial Member 8 minutes ago, 331BK said: For sure it should sake but that was prety heavy. Just reduce level SURFACE-RIGID and DHM. Also note that the PMDG 747 has its own shaking settings (turn off via MCDU) Nick Bebyakin / Handmade cameraset - Ezdok v2 and Ezdok v3 EZdok Software. Support remains on the http://www.ezdok-camera.com/ [email protected] / 20Gb / RTX 2060-OC-6Gb / Win10x64 / MSFS2020
February 14, 20197 yr For the FSL Bus, you can delete all Hotkeyselect = entries in the Camera section of the aircraft.cfg. You must do that to the 4 aircraft files + the 4 copies in each Documents\Prepar3D v4 Add-ons\FSLabs\SimObjects\Airplanes\FSLabs A3XX XXX\.config folders. And EZCA 2 or 3 will work like a charm. - PC Hardware: AMD Ryzen 9 9950X3D // Asus ROG Crosshair X870E HERO // 2x32Gb Corsair Dominator Titanium DDR5 6000MT/s CL30 // ASUS ROG Strix GeForce RTX 4090 OC Edition // 4Tb Corsair NVMe M.2 MP600 // Corsair 1600W PSU Samsung Odyssey Arc 55" curved 165 Hz monitor. - Simulator Hardware: VIRPIL Constellation Alpha Prime + VIRPIL VPC Universal Control Panel - #3 + MOZA AY210 Force Feedback Yoke + WINWING URSA MINOR 32 Throttle & PAC Metal + WINWING SKYWALKER Metal Rudder Pedals + WINWING Airbus FCU & EFIS + WINWING Boeing 3N PAP + WINWING MCDU-32 + WINWING PFP-4 + WINWING PFP 3-N + WINWING PFP-7.
February 14, 20197 yr Hello, I have a very annoying problem on the aerosoft airbus! I explain when I want to start the taxiing the plane does not roll I'm almost 40% N1 and I'm 0 Kts! And very biavariant when I leave at this time the EZCA software the plane puts a blow in advance very suddenly and found at 10 15kts the speed or I should have been normally! Since yesterday I have done a lot of tests I tried everything and can not solve the problem ... t hank you in advance for your help
Archived
This topic is now archived and is closed to further replies.