Chaseplane Motion Effects for Jetliners

[Zimmerbz 153]

I am just curious if anyone has a good mix of settings for the motion effects for Chaseplane; in particular with an A320 or 737.  I've messed around with them a ton but can't find the right mix and wanted to know if anyone else out there has found a mix that they like.  I also realize it is personal preference but would love a good starting point and go from there.  THanks!

[Nyxx 6,993]

well make sure you have wind on the aircraft turned up to the 50% of the slider mark. Then you will get whatever wind is out there affecting your aircraft/camera.

[Zimmerbz 153]

12 minutes ago, Nyxx said:

well make sure you have wind on the aircraft turned up to the 50% of the slider mark. Then you will get whatever wind is out there affecting your aircraft/camera.

What about for the others (ground, anticipation, breathing, F. Horizon, etc)?  I am in a flight right now in FSL319 at FL380 and at 50% wind i'm shaking like crazy... is that what you typically see? FL380 wind is 235/47 headwind

[Nyxx 6,993]

having wind at 50 % up on the slider just lets it show the wind normally the wind does not go over 20%....hang on i will go look in sim..

[Nyxx 6,993]

OK, I have Environment ground set to 3.00 and wind set to 3.00, human default I think 1/1/10, aircraft accels 3.75/1/.68/0

[Zimmerbz 153]

5 minutes ago, Nyxx said:

OK, I have Environment ground set to 3.00 and wind set to 3.00, human default I think 1/1/10, aircraft accels 3.75/1/.68/0

I'll give this a look.... Do you ever have these settings with a "smooth" view?  With these I am shaking still, but It might be because of the actual wind turbulence I guess? 

[Nyxx 6,993]

I like the wind slider up, if you have strong winds just move the slider to your personal taste. I like 3 but see what you like the feel of. "smooth view" not sure what that is?

[Zimmerbz 153]

Right now with the settings you gave, my VC is shaking continuously.  Where as is if I had it set to 0, there would be no shaking or vibrating.  I think what I was looking for would be wind causing shaking when gusty or choppy, and in smooth flight, having very little shaking or none at all.  Does that make sense?  Sorry if that is hard to follow..

9 minutes ago, Nyxx said:

I like the wind slider up, if you have strong winds just move the slider to your personal taste. I like 3 but see what you like the feel of. "smooth view" not sure what that is?

 

[Nyxx 6,993]

No that's easy to follow, I would suggest you set winds to 1.5-2.00, the plane is moving around all the time IRL so I like some movement but it's personally taste to how much.

AS will give you the shaking and vibrating on top off the CP wind movement. I set up winds in AS as per FSL instructions.

Edited February 12, 2019 by Nyxx

[Nyxx 6,993]

I've just seen why 3 will be to high i go into the tuning options and turned the movement if you don't wish to do that then 1.5-2 max should be fine.

[Zimmerbz 153]

Cool.  Thanks!  I'll give it a whirl

[Nyxx 6,993]

Let me know what you settled on.

[Zimmerbz 153]

I did your settings and did 2 on the wind just in time for my approach into KRSW.  I liked it.  Thanks!

[Nyxx 6,993]

Good happy to help

[bbain1187 118]

I wish Chaseplane would link up to Active Sky the way EZDOK v3 apparently does to give you realistic turbulence effects. I've tried playing with the 'wind' setting, but had the same problem the OP has. It's either always on or always off. I wish it would communicate with AS and shake the camera around only when in turbulent or choppy conditions. 

Ben