Hi,

did someone succesfully integrate both GTN into the Carenado CT210? I tried but it seems I failed. When I activate the GTN 750 in the plugins menu as GTN1, everything is fine. The bezel changes to the GTN750 and seems to work correctly at the first sight. Then I activate the GTN 650 (integrated into the GNS430 display)  as GTN2 the GTN 750 dissapears and the default GNS 530 is back in the VC. The GTN 750 is still activated in the plugins menu. I thought first I found a workaround by first activating the GTN 650 and afterwards the GTN 750, but when realoding the plane, I get the same effect. Any solutions, ideas on this?

Spoiler

[GTN]
; comma separated list of gauges
gauges = GTN_650_2, GTN_750_1

[GTN_750_1]
; comma separated list of render targets.
drawto = WINDOW, PANEL3D
; is the master device if true.
MasterDevice = true
Rheostat.Buttons = -100
LinkCrs = true
LinkObs = true
LinkVor = true
UseRyanTcad = false
VoicePref = MALE
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1

[GTN_750_1.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 246,2038,830,692
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
; display as popout window if true (requires XP11.1).
undocked = false
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,790,830,790

[GTN_750_1.PANEL3D]
; display window if true.
visible = true
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANEL3D
; display position and dimension (left,top,width,height)
frame.rect = 1218,2048,830,1024
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = true
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GTN_650_2]
; comma separated list of render targets.
drawto = WINDOW, GTN_650_screen
; is the master device if true.
MasterDevice = false
; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2
NavDbType = 1

[GTN_650_2.WINDOW]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = false
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = WINDOW
; display position and dimension (left,top,width,height)
frame.rect = 1090,1060,830,350
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true
; VR mode position and dimension (left,top,width,height) (requires XP11.20)
vrmode.rect = 0,350,830,350
; display as popout window if true (requires XP11.1).
undocked = false
; display mouse tooltips if true.
tooltips = false
; freeze display position if true.
locked = false

[GTN_650_2.PANELS]
; display window if true.
visible = false
; show screen only gauge if true.
nobezel = true
; display type: WINDOW,PANEL2D,PANEL3D,PANELS
frame.type = PANELS
; display position and dimension (left,top,width,height)
frame.rect = 0,0,0,0
; screen only border size (pixels).
border.size = 0
; screen only border color (#RGB or #RGBA).
border.rgba = #000000
; enable mouse clickspots if true, disable if false (use SHIFT to override)
usemouse = true
; left mouse button on the screen toggles popup window if true (requires SHIFT+left mouse button).
popleft = false
; right mouse button on the screen toggles popup window if true (requires XP11.1).
popright = true

[GTN_650_2.GTN_650_screen]
visible = true
nobezel = true
frame.type = PANEL3D
frame.rect = 7,1278,431,229
usemouse = true

 

[edit] I also see, that the turn knobs don't work. Neither with the GTN 750 3D bezel (only the push button is working), nor the GTN 650 inside the GNS 430 bezel.

 

Cheers,

Stefan

Edited February 14, 20197 yr by StefanH75

Hi,

the knobs broke with our latest update and we have a fix on its way.

As for the dual GTN, I suspect the Carenado code logic to hide/show the GTN 3D bezel depending on our shared datarefs has not been designed for this scenario, therefore, misinterprets the additional GTN and reverts to a default GPS instead.

Thank you Jean-Luc, I'll adress this at Thranda then.

v2.5.13 has been released and fixes the knob issue.