Yet another aircraft released by Krzysztof Kaniewski

The SZD-9 Bocian (Polish: "Stork") is a multi-purpose two-seat sailplane that was designed and built in Poland at Szybowcowy Zakład Doświadczalny (Glider Experimental Works) in Bielsko-Biała, beginning in 1952. It was designed to be capable of fulfilling the needs of every area from training to competition flying. (From Wikipedia, the free encyclopedia) This is free add-on for AeroflyFS developed by Krzysztof Kaniewski, 2015 ver. 1.0 then for Aerofly FS2, February 2019 3D model by AJ MacLeod.  https://github.com/FGMEMBERS/bocian Thanks to him (Read notes below). Some features may not work as intended and this aircraft could crash your aerofly FS2. Use it at your own risk!

https://github.com/krzysk1/bocian

Piper PA-11 Cub Special for Aerofly FS2: Same Github Link: https://github.com/krzysk1?tab=repositories 

The ASK 13 is a two-seater glider that was built by Alexander Schleicher. It was and still is widely used for ab-initio training of glider pilots. (From Wikipedia, the free encyclopedia)

ASK13 by Simon Morley (Good ol' Simon from my Outerra days) 

This is free add-on for Aerofly FS, 2016 then for Aerofly FS2, 2019 developed by Krzysztof Kaniewski, Original 3D model (for FlightGear) by Patrice Poly. Thanks to him. https://github.com/FGMEMBERS/ASK13

Some features may not work as intended and this aircraft could crash your Aerofly FS2. Use it at your own risk! https://github.com/krzysk1/ask13

Installation:

1. Unzip file and move the folder "ask13" to C:\Users~\Documents\Aerofly FS2\aircraft. 

The DG-100 of 1974 is the first sailplane manufactured by Glaser-Dirks, developed from the Akaflieg Darmstadt D-38, the Standard class sailplane was designed by Wilhelm Dirks. Some DG-101 sailplanes were constructed by ELAN in Slovenia and are designed with a "G" suffix. https://github.com/krzysk1/dg101g

 

 

Plane: Piper PA-11 Cub Special Float https://github.com/krzysk1/pa11f

The Piper PA-11 Cub Special is a later production, two-place variant of the Piper J-3 Cub light propeller-driven aircraft, manufactured by Piper Aircraft.

Original 3D design and original sound files: Adrian Fernandez Gomez (please visit www.alcala-sim.com).

Original Aerofly FS 1 aircraft and Aerofly FS 2 adaptation: Krzysztof Kaniewski krzysk (at) wp.pl

Aerofly FS 2 optimizations, flight physics, performance: Jan-Hendrik Hanuschik (IPACS)

Tip: To start the engine grab the propeller blade and rotate the propeller. When using a mouse drag down instead of around the spinner for the best result.

 

e415

Ercoupe 415-Caddy

The ERCO Ercoupe is a low-wing monoplane aircraft that was designed and built in the United States. It was first manufactured by the Engineering and Research Corporation (ERCO) shortly before World War II;

Aerofly FS 2 aircraft made by Krzysztof Kaniewski. Flight Model, systems and animations by Arno54, 3D model by Khamsin (http://xpfr.org/).

Some features may not work as intended and this aircraft could crash your Aerofly FS2. Use it at your own risk!

Installation

1. Unzip file and move the folder "e415" to C:\Users~\Documents\Aerofly FS2\aircraft.

Note: there are no pedals = rudder is connected with ailerons

https://github.com/krzysk1/e415

 

e415 float and Skids models released, many other models updated:

https://github.com/krzysk1/e415s 

https://github.com/krzysk1/e415f

 

This is a Sherwood Ranger XP kit plane. Manufactured by the The Light Aircraft Company in the UK. A very cool project that lets students experience building a plane. The XP (CAT A(UK)) is a clipped wing version of the ST. Engine: D-motor LF2600 2690cc, liquid cooled, four cylinder, four stroke, 91.8hp, fuel injected, flathead Folding Wings for storage Level flight: approximately 70mph.

The prime difference between the Sherwood Ranger ST (Microlight) and the Sherwood Ranger XP (Cat A) is one of wing span and wing loading. The ST has a wing span of 7.92 m and the XP 7 m, they both have the same MTOW the XP therefore has increased wing loading and a higher stall speed.

Model for Aerofly FS2 made by Krzysztof Kaniewski. 3D Design by Jared Watson.

https://github.com/krzysk1/rangerxp

 

Heads up!!

Again, a reminder to check back often on these planes, as many are works in progress with constant updates.

Currently many of these planes are having the first iteration of VR hands added, such as on the plane above: 

Its instructive to read the commits on these planes from time to time when there has been a recent update to see what has changed: https://github.com/krzysk1/rangerxp/commits/master

The Extra 330 SC is a Lycoming AEIO-580-powered single-seat aircraft with improved roll rate and easier roll stops, designed specifically for Unlimited category competition. It is actually the only single-seater aerobatic aircraft built by Extra. (From Wikipedia, the free encyclopedia)

This is free add-on for Aerofly FS2 developed by Krzysztof Kaniewski, Original 3D model created by Martins Upitis; [http://devlog-martinsh.blogspot.com/]>](http://devlog-martinsh.blogspot.com/]>). Thanks to him. Flight dynamic model based on default Aerofly FS 330LX.

Some features may not work as intended and this aircraft could crash your Aerofly FS2. Use it at your own risk! (Currently this aircraft has no sound)

https://github.com/krzysk1/bgear

The BD-5 Micro is a series of small, single-seat homebuilt aircraft created in the late 1960s by US aircraft designer Jim Bede and introduced to the market primarily in "kit" form by the now-defunct Bede Aircraft Corporation in the early 1970s. The BD-5J version holds the record for the world's lightest single-engine jet aircraft, weighing only 358.8 lb (162.7 kg).

Made by Krzysztof Kaniewski, 2015 (Aerofly FS); 2019 (Aerofly FS2) 3D model by Paul Jay Schrenker, 2007. http://www.sharecg.com/v/21677/browse/5/3D-Model/BD-5J-Model

 

Download Here: https://github.com/krzysk1/bd5j

 

I would pay for a Jet Ranger, UH-1, EC145, Cabri G2, AH-1, and a Blackhawk!

z526afs

Zlin 526 AFS Akrobat Special is a Czech sports plane used in aerobatics. The Z-526 was originally designed by Zlin Aircraft in 1959. Made by Krzysztof Kaniewski. 3D Design: Ivan Smilauer. https://github.com/krzysk1/z526afs

 

Any helicopters there?

3 hours ago, dongdongliushui said:

Any helicopters there?

Nope.

But then it gets complicated. There are apparently two other copters for Aerofly, but they are supposedly currently only available for the professional market. (see pic below)

Only one third party (freeware) helicopter being worked on that I know of right now. A Lynx.