Jump to content

Sign in to follow this  
westman

9900k on Z370 nice combo

Recommended Posts

1 hour ago, Ray Proudfoot said:

I agree with @Gabe777 that pushing the CPU to its absolute limits is unwise with the benefits being so small. I have my i7-8086K set at 4.6Ghz now and I'm more than happy. If I need a few more fps at busy airports like EGLL or KLAX I just reduce UT Live from 100% down to a lower level. Removing 50+ Ai will have a significant impact on performance.

The worst performance I've had was on approach to Aerosoft Heathrow Xtended 09L with 230+ Ai and the fps hovered around 20. Still more than acceptable for a good landing. And that's running at UHD!

I accept there are people who want the maximum performance from their systems but don't understand their logic. Each to their own I suppose.

Ray its all up to you and Gabe77, can give you a small hint this system is atleast 30% faster and 2 more cores then your 8086k with slow 3000mhz mems.

As TS i hope you can start a tread there you discuss pushing your systems to the absolute limits , i have not push this to the limits yet iam on the safe side for 5-6years on other hand i get a new system to test soon.

After reading your Mega tread 5GHZ OC and even give you some answers, not sure you now what the absolute limits is atleast not on my system.

Edited by westman

Share this post


Link to post
Share on other sites

@westman, enjoy your extreme system. I'm enjoying mine. I don't consider 3000Mhz memory slow.

it seems you're still not satisifed and want an even faster system. Addicted to speed? Sounds like it to me. 😂


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites
2 minutes ago, Ray Proudfoot said:

@westman, enjoy your extreme system. I'm enjoying mine. I don't consider 3000Mhz memory slow.

it seems you're still not satisifed and want an even faster system. Addicted to speed? Sounds like it to me. 😂

Yes want a faster system, iam one of lucky that get new test hardware for free 

Share this post


Link to post
Share on other sites
2 hours ago, Ray Proudfoot said:

I agree with @Gabe777 that pushing the CPU to its absolute limits is unwise with the benefits being so small. I have my i7-8086K set at 4.6Ghz now and I'm more than happy. If I need a few more fps at busy airports like EGLL or KLAX I just reduce UT Live from 100% down to a lower level. Removing 50+ Ai will have a significant impact on performance.

The worst performance I've had was on approach to Aerosoft Heathrow Xtended 09L with 230+ Ai and the fps hovered around 20. Still more than acceptable for a good landing. And that's running at UHD!

I accept there are people who want the maximum performance from their systems but don't understand their logic. Each to their own I suppose.

Totally.

I reduce Autogen from very dense to Normal and get a 30 percent boost !

Why would I pay over a 1000 quids to upgrade from a 7700k at 4.5 auto boost, plus a 1080 GTX , to a 9xxx and a 2080 ti, for a 25 percent boost ?

Equally, why fry my CPU - which never exceeds 65 degrees, for a boost of 5 to 10 FPS...?

FLIGHTSIM  has never looked so good... I run on a 32 inch MVA 2K monitor and P3D is gorgous.

I'll say it - I'm not afraid - I will not be greedy.

In 2 or 3 years, when a 6 or 700 quid investment will give me a 60 or 70 percent boost - without any stoopid overclocking - I may THEN upgrade, and my current hardware can be relegated to a media PC, for running 16K video at 1000 fps !

Share this post


Link to post
Share on other sites
2 hours ago, westman said:

Ray its all up to you and Gabe77, can give you a small hint this system is atleast 30% faster and 2 more cores then your 8086k with slow 3000mhz mems.

I think you're underestimating the 9900K at 5.4/5.0 with 4000+ low latency memory ....I'd like to see Rays hardware configuration vs yours, with the p3d settings you run, set a with a FIBER_FRAME_TIME_FRACTION=.01.  <vbg>

Edited by FunknNasty

    ROG Maximus X Apex Z370 -- 8086 @ 5.3 / NB 5.0 -- GSkill  @ 4133 c17-17-32~Cr1 1.42v  -- EVGA 1080Ti 6393 -- ROG PG279Q 1440P 150hz -- Corsair H100i V2 --Samsung EVO 850(s) -- Windows7 Pro 64 --Corsair 750X

Ken C

Share this post


Link to post
Share on other sites
26 minutes ago, Gabe777 said:

Totally.

I reduce Autogen from very dense to Normal and get a 30 percent boost !

Why would I pay over a 1000 quids to upgrade from a 7700k at 4.5 auto boost, plus a 1080 GTX , to a 9xxx and a 2080 ti, for a 25 percent boost ?

Equally, why fry my CPU - which never exceeds 65 degrees, for a boost of 5 to 10 FPS...?

FLIGHTSIM  has never looked so good... I run on a 32 inch MVA 2K monitor and P3D is gorgous.

I'll say it - I'm not afraid - I will not be greedy.

In 2 or 3 years, when a 6 or 700 quid investment will give me a 60 or 70 percent boost - without any stoopid overclocking - I may THEN upgrade, and my current hardware can be relegated to a media PC, for running 16K video at 1000 fps !

My processor runs at 70c and processes 2x what yours does.

I probably paid 20% more for my hardware than you did for yours but I'm probably getting 2x the performance ...greedy? I call it surplus value.

I ran a Sandybridge at 5.0 for 5 years ....the 1st of year of use I was publishing benchmarks at 5.4 Ghz .... The person I sold it to says it's still running strong.


    ROG Maximus X Apex Z370 -- 8086 @ 5.3 / NB 5.0 -- GSkill  @ 4133 c17-17-32~Cr1 1.42v  -- EVGA 1080Ti 6393 -- ROG PG279Q 1440P 150hz -- Corsair H100i V2 --Samsung EVO 850(s) -- Windows7 Pro 64 --Corsair 750X

Ken C

Share this post


Link to post
Share on other sites
31 minutes ago, FunknNasty said:

I think you're underestimating the 9900K at 5.4/5.0 with 4000+ low latency memory ....I'd like to see Rays hardware configuration vs yours, with the p3d settings you run, set a with a FIBER_FRAME_TIME_FRACTION=.01.  <vbg>

Iam a nice guy not want to harm them to much, you ar probaly right my friend. 

Share this post


Link to post
Share on other sites

@westmanhasn’t disclosed his graphics card or resolution. And @FunknNastyis running at 2560*@1440 which for a 1080Ti is like running a Ferrari at 50mph.

Why aren’t you running at 4K when your kit can support it?

I don’t have all sliders to the right. I fly Boeing so have no need to see every building in P3D.

And what is FIBER_FRAME_TIME_FRACTION=.01 all about? I thought P3D didn’t need tweaks?


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites
32 minutes ago, FunknNasty said:

My processor runs at 70c and processes 2x what yours does.

I probably paid 20% more for my hardware than you did for yours but I'm probably getting 2x the performance ...greedy? I call it surplus value.

I ran a Sandybridge at 5.0 for 5 years ....the 1st of year of use I was publishing benchmarks at 5.4 Ghz .... The person I sold it to says it's still running strong.

Which is great.

But you are not getting 2x the FPS performance.

If you are upgrading from old stuff then fine.

Bu it isn't worth upgrading from Kabylake just yet.

But I think the point we were making was that overclocking for a 10 percent gain isn't worth the benefit... I see 8 and 9 series cpus running at 90 degrees...  and that's with massive and noisy watercoolers.

We Kabylakers just reduce a few sliders 1 or 2 notches and still get a 30 percent boost.

I will not overclock 10 percent and fry my cpu just for 5 or 6 more fps. It is absurd... as is upgrading for just a 30 percent boost.

My best upgrade was to a M.2 NvMe drive.

 

Edited by Gabe777

Share this post


Link to post
Share on other sites
47 minutes ago, Ray Proudfoot said:

@westman@FunknNastyAnd what is FIBER_FRAME_TIME_FRACTION=.01 all about? I thought P3D didn’t need tweaks?

Ray, I put your +/- with regard to your contributions to these forums in the solid + range but, like a few others around here, I get the sense that your appreciation of P3d is a bit on the shallow side. I see the FIBER_FRAME_TIME_FRACTION=XX as more of a resource than a tweak.


    ROG Maximus X Apex Z370 -- 8086 @ 5.3 / NB 5.0 -- GSkill  @ 4133 c17-17-32~Cr1 1.42v  -- EVGA 1080Ti 6393 -- ROG PG279Q 1440P 150hz -- Corsair H100i V2 --Samsung EVO 850(s) -- Windows7 Pro 64 --Corsair 750X

Ken C

Share this post


Link to post
Share on other sites
48 minutes ago, Gabe777 said:

Which is great.

But you are not getting 2x the FPS performance.

I'm claiming performance with no FPS qualifier. Heck, my fps counter maxes out at 30 fps.


    ROG Maximus X Apex Z370 -- 8086 @ 5.3 / NB 5.0 -- GSkill  @ 4133 c17-17-32~Cr1 1.42v  -- EVGA 1080Ti 6393 -- ROG PG279Q 1440P 150hz -- Corsair H100i V2 --Samsung EVO 850(s) -- Windows7 Pro 64 --Corsair 750X

Ken C

Share this post


Link to post
Share on other sites
6 minutes ago, FunknNasty said:

Ray, I put your +/- with regard to your contributions to these forums in the solid + range but, like a few others around here, I get the sense that your appreciation of P3d is a bit on the shallow side. I see the FIBER_FRAME_TIME_FRACTION=XX as more of a resource than a tweak.

I love P3D but I'd rather spend time flying than tweaking. I still have no idea what that tweak does. Care to elaborate?


Ray (Cheshire, England).
System: P3D v4.5, Intel i7-8086K o/c to 4.6Ghz, Nvidia GTX 1080 Ti 11Gb, Samsung 970 EVO M.2 SSD, 1Tb Samsung 860 EVO SSD, Asus Prime Z370-A mobo, 32Gb G.Skill DDR4 3000Mhz RAM, Win 10 Pro 64-bit, BenQ PD3200U 32” UHD monitor.
Cheadle Hulme Weather

Share this post


Link to post
Share on other sites
1 hour ago, Ray Proudfoot said:

@westmanhasn’t disclosed his graphics card or resolution. 

 

4K . its a Galaxy 1080TI HOF OC Lab Edition in the 9900k PC have 4 of them and one Galaxy 2080TI HOF OC Lab edition that i shall put in later ( my 8700k was runing with that 1080TI have to test the diffrence to the 9900k)

http://galaxstore.net/GALAX-GeForce-RTX-2080Ti-HOF-OC-Lab-WC-Edition_p_180.html

 

 

Edited by westman
  • Like 1

Share this post


Link to post
Share on other sites
57 minutes ago, Ray Proudfoot said:

I love P3D but I'd rather spend time flying than tweaking. I still have no idea what that tweak does. Care to elaborate?

Well, I'm pretty darn proud of my flight book.

"Can I elaborate?" -I'd rather not, as they're are smarter people than I on the topic that already have.


    ROG Maximus X Apex Z370 -- 8086 @ 5.3 / NB 5.0 -- GSkill  @ 4133 c17-17-32~Cr1 1.42v  -- EVGA 1080Ti 6393 -- ROG PG279Q 1440P 150hz -- Corsair H100i V2 --Samsung EVO 850(s) -- Windows7 Pro 64 --Corsair 750X

Ken C

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    27%
    $6,985.00 of $25,000.00 Donate Now
×
×
  • Create New...