Jump to content

ryoji

About nose gear animation of Airbus 330 of Overland (SMS)

Recommended Posts

左右にタキシングする場合、ステアリングが最大に曲がっていても、ノーズギアは45°程度しか動きませんが、航空機で編集することはできます。 cfg、約90°に移動しますか?

Share this post


Link to post
Share on other sites

Here is the English translation:  Please use English only in these forums.

When taxiing to the left or right, the nose gear only moves about 45 ° even if the steering is at the maximum, but it can be edited on the aircraft. cfg, move about 90 degrees?

[contact_points]

        //0  Class                        <0=none, 1=wheel, 2=scrape, 3=float>
        //1  Longitudinal Position        (feet)
        //2  Lateral Position             (feet)
        //3  Vertical Position            (feet)
        //4  Impact Damage Threshold      (Feet Per Minute)
        //5  Brake Map                    (0=None, 1=Left, 2=Right)
        //6  Wheel Radius                 (feet)
-->    //7  Steer Angle                  (degrees)
        //8  Static Compression           (feet)  (0 if rigid)
        //9  Max/Static Compression Ratio
        //10 Damping Ratio                (0=Undamped, 1=Critically Damped)
        //11 Extension Time               (seconds)
        //12 Retraction Time              (seconds)
        //13 Sound Type
        //14 Airspeed limit for retraction     (KIAS)
        //15 Airspeed that gear gets damage at (KIAS)

//
// Nose Gear
//point.0 = 1,  48.450,  -0.67, -9.85, 1181.1, 0, 1.777, 75.00,  1.000, 1.500,  0.650,  9.000,  9.000, 0, 235.0, 320.0
//point.1 = 1,  48.450,   0.67, -9.85, 1181.1, 0, 1.777, 75.00,  1.000, 1.500,  0.650,  9.000,  9.000, 0, 235.0, 320.0


Charlie Aron

CPU-AMD 2GHZ  2GB RAM  NVidia Graphics FSX with SP1 and SP2  running Win XP

                                     

 

Share this post


Link to post
Share on other sites

This may be hardcoded in the model. The settings in the aircraft.cfg file are more for dynamics. Thus, if you modify the steering angle, you may do tighter or looser turns, but it won't be reflected in the nose gear animation.


Best regards,
Luis Hernández 20px-Flag_of_Colombia.svg.png20px-Flag_of_Argentina.svg.png

My rig: ASUS TUF FX504GD (Intel i5 8300H @ 2.8-4.0 GHz, 8 GB DDR4-2666 RAM, Nvidia GTX 1050, 256 GB M.2 SSD+256 GB SATA III SSD as storage, Windows 10 Home)

Saitek X-52 / Xbox 360 wired / eDimensional G-Pad Pro wired controllers.

Attempting finally to run FSX-SE only. Will I manage to do so?

Share this post


Link to post
Share on other sites
25 minutes ago, Luis Hernandez said:

This may be hardcoded in the model. The settings in the aircraft.cfg file are more for dynamics. Thus, if you modify the steering angle, you may do tighter or looser turns, but it won't be reflected in the nose gear animation.

Thanks for your comment

When I changed the values of rudder_limit and rudder_area in the [airplane geometry]section referring to other forums, the nose gear started to move up to 90 °, but I could not be satisfied with the sense of operation and the gap.  Find time again and try a lot

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...