Jump to content
Sign in to follow this  
bhorv67

Some Departure Procedures not working

Recommended Posts

I think I've reported these issues in an earlier thread. 1.8 didn't fix.

Still needs fixed:

Before taxi: FS2crew calls out to set flaps/slats. FO does not set flaps or slats, I have to do it manually. Not a big deal, but is the FO supposed to?

After takeoff: FS2crew calls out to retract flaps. FO does not retract flaps. I have to manually

                      FS2crew calls out to retrace slats. FO does not retract slats. The next to-do is 'climb check'. If I retract the slats manually before climb check, the FO will deploy slats when 'climb check' is initiated by fs2crew. If I don't retract slats manually, and 'climb check' is initiated, slats are left out. I have to wait until climb check is completed, then retract slats manually. 

 

On arrival - FO manages flaps/slats as intended. 


Brian Horvath

Asus Tuf z790-Plus i9 13900k Asus Strix RTX3080ti @ 4k/30hz Corsair h100i gSkill Trident Z DDR4 3200 32g (8g x4) Asus VG289 4k Display (#1) Viewsonic 1080p Display (#2) Samsung Evo 990 m.2 NVMe 1T (WIn),Samsung 980 m.2 NVMe 2Tb (p3d & Addons) 500g / 2 500g SSD Corsair TX750 Logitech Z5500 Lenovo W540 (ASv4 / Aivlasoft EFB v2), Win 1809 Pro

Share this post


Link to post
Share on other sites

The issue is only on departure. On arrival, the FO controls flaps/slats as intended. 

I don't have any hardware that would prevent FS2crew from commanding the flaps/slats


Brian Horvath

Asus Tuf z790-Plus i9 13900k Asus Strix RTX3080ti @ 4k/30hz Corsair h100i gSkill Trident Z DDR4 3200 32g (8g x4) Asus VG289 4k Display (#1) Viewsonic 1080p Display (#2) Samsung Evo 990 m.2 NVMe 1T (WIn),Samsung 980 m.2 NVMe 2Tb (p3d & Addons) 500g / 2 500g SSD Corsair TX750 Logitech Z5500 Lenovo W540 (ASv4 / Aivlasoft EFB v2), Win 1809 Pro

Share this post


Link to post
Share on other sites

yes, following procedures.

I'm able to deploy the flaps & slats, but on departure, I have to press F7, the FO won't do it. If it was a hydraulics issue, they wouldn't deploy at all. 

Same as if there was a hardware issue, the FO wouldn't be able to deploy on approach, but it works as intended only then. 


Brian Horvath

Asus Tuf z790-Plus i9 13900k Asus Strix RTX3080ti @ 4k/30hz Corsair h100i gSkill Trident Z DDR4 3200 32g (8g x4) Asus VG289 4k Display (#1) Viewsonic 1080p Display (#2) Samsung Evo 990 m.2 NVMe 1T (WIn),Samsung 980 m.2 NVMe 2Tb (p3d & Addons) 500g / 2 500g SSD Corsair TX750 Logitech Z5500 Lenovo W540 (ASv4 / Aivlasoft EFB v2), Win 1809 Pro

Share this post


Link to post
Share on other sites

Button control. 

This is what I'm saying - the FO calls out to set flaps/slats during after start check, and even says it's been done, but the setting isn't made. I have to set them manually. Same thing happens after takeoff, I can go through the after takeoff flow, and the FO calls out to retract flaps/slats, but it's not done. I should also mention that if I retract slats myself BEFORE 'climb check' is done, the slats will deploy (very weird), I have to wait until the climb check list is complete to manually retract slats.

I do run the full checklist. 


Brian Horvath

Asus Tuf z790-Plus i9 13900k Asus Strix RTX3080ti @ 4k/30hz Corsair h100i gSkill Trident Z DDR4 3200 32g (8g x4) Asus VG289 4k Display (#1) Viewsonic 1080p Display (#2) Samsung Evo 990 m.2 NVMe 1T (WIn),Samsung 980 m.2 NVMe 2Tb (p3d & Addons) 500g / 2 500g SSD Corsair TX750 Logitech Z5500 Lenovo W540 (ASv4 / Aivlasoft EFB v2), Win 1809 Pro

Share this post


Link to post
Share on other sites

Byork,

This has been an ongoing issue for alot of users since 1.7, 1.6 was working fine.

I currently have FS2Crew disabled now for the Maddog which is a real shame, would like a fix as this has been ongoing for awhile.

I am happy to invite FS2Crew tech members for a private shared screen display of what is happening. Send me a PM of this is something of interest?

Regards

Lonz

Share this post


Link to post
Share on other sites

I have just tried the latest FS2Crew build with my fresh new install of P3D v4.5 (HF1) and it all seems to work as it should.

The FO selects the correct flaps during the after start checks (I've tried both the standard settings of 11 and 15 as well as a dial-a-flap setting of 8).

After take off I command "flaps up" and the FO carries out the actions fine.

I only run the voice control, so can't check the button option.

 


beta.gif

Share this post


Link to post
Share on other sites

I as well, have the latest Maddog build and 1.8 of fs2crew. The FO action items for flaps/slats during pre-flight is still a problem


Brian Horvath

Asus Tuf z790-Plus i9 13900k Asus Strix RTX3080ti @ 4k/30hz Corsair h100i gSkill Trident Z DDR4 3200 32g (8g x4) Asus VG289 4k Display (#1) Viewsonic 1080p Display (#2) Samsung Evo 990 m.2 NVMe 1T (WIn),Samsung 980 m.2 NVMe 2Tb (p3d & Addons) 500g / 2 500g SSD Corsair TX750 Logitech Z5500 Lenovo W540 (ASv4 / Aivlasoft EFB v2), Win 1809 Pro

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...