GTN 650 Goes Blank With Pop-Up Unit Configured (resolved)

[snpower 16]

I have both the 750 and the 650, where I normally setup the 750 as a pop-up. I decided that I wanted both and to my dismay the panel unit goes dark when the pop-up is enabled. Going back to just one pop-up (750) doesn't bring the 650 back to life, either - I have to run the setup routine again.

[RXP 2,338]

Hi, 

Can you please post the content of the RXP log files? (see user's manual for file/path).

You might want to also post a screenshot of the issue?

 

[snpower 16]

19/06/22 23:00:15.173 13620 -    ] # rxpGTN.dll version 2.5.18.0
19/06/22 23:00:15.173 13620 INFO ]

 

19/06/22 23:00:09.813 15216 -    ] # rxpGTN_menu.dll version 2.5.18.0
19/06/22 23:00:09.814 15216 INFO ] edit panel: C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\MV_C310R\panel\panel.cfg

 

 

19/06/22 23:00:17.475 13620 -    ] # rxpGtnSim64.dll version 2.5.18.0
19/06/22 23:00:17.474 13620 INFO ]
19/06/22 23:00:19.334 14900 INFO ] GTN 750.1 - TRAINER 6501
19/06/22 23:00:19.342 14900 WARN ] GTN 750.1 process is running as-admin
19/06/22 23:00:19.619 14900 INFO ] GTN 650.2 - TRAINER 6501
19/06/22 23:00:19.629 14900 WARN ] GTN 650.2 process is running as-admin
19/06/22 23:00:19.912 13620 ERROR] invalid count for GTN 650.1

 

 

 

 

[RXP 2,338]

On 6/22/2019 at 7:02 PM, snpower said:

19/06/22 23:00:19.912 13620 ERROR] invalid count for GTN 650.1 

Hi,

the log file should tell you what the issue is: you've most likely configured a GTN 750 #1 unit and GTN 650 #2 unit as popup and this is fine, but you've also configured a GTN 650 #1 unit in the panel... You can only have one #1 + one #2 unit (no 2x#1 or 2x#2).

Just review you panel.cfg file.

Besides, the log file also say you are running P3D4 as-admin. Is there any reason to risk loosing your hard drive in case any addon or P3D has a bug?

Imagine an addon wanting to do: "delete C:\PathToFiles\*.*" but because of a bug it does "delete C:\*.*" ... scary?

[snpower 16]

There was indeed a duplicate configuration section in my panel.cfg. Thank you for the help, and the tip.