PA23 Texture flickering

[ppo 67]

Your DX10 fixer is working perfectly here... except for a new installed a/c: Alabeo PA23. The VC is OK. Instruments are OK and so are the lights. But the outside view of the a/c is flickering: 1 beat per second. Sky is OK. Water is OK. Nothing else is flickering.

It is obviously only this a/c. Other Alabeos a/c are OK.

Any ideas before I start playing with the textures of the a/c?

edit: I have ticked/unticked just about every option that could affect the a/c textures

Tks anyway, truly enjoying your product.

Cheers,

Pierre

Edited November 6, 2019 by ppo

[ppo 67]

Please disregard Steve. Has nothing to do with DX10.

It does it in DX9 also. Using Envdir and reverted to original but still the problem shows.

So, again disregard.

Pierre

[SteveFx 258]

Ok, good testing as that’s what I would have asked you to do.  Is it related to aircraft lights?   Ie Turn all lights off. For something to change once a second I would have thought it must be related to effects in some way.  Does it stop if you pause?

[ppo 67]

Yes it does stop if I pause.

Presently re-starting from scratch...

Will see. Very special indeed as is sometimes with software.

Will report back.

 

[ppo 67]

Found the culprit: MV_WX.dll version 1.12.0.40

When disabled in the dll.xml problem is solved.

Now, I have to find why that particular version is causing that problem.

Will let HiFi know.

As mentioned previously, problem is not related to DX10 at all.

Sorry to disturb you Steve,

Cheers,

Pierre

[SteveFx 258]

No problem at all Pierre , if anyone reports a similar problem I know have this thread to refer them to!  And I am impressed with anyone who can debug a problem so well.